• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.269-281
• /
• 2010

The cone penetration test(CPT) has been increasingly used for in situ site characterization. However, the use of CPT is often limited due to specific site conditions depending on the cone size, geometry, and capacity of the CPT system used. In South Korea, it has generally been considered that the CPT could be satisfactorily performed only in soft soils. Louisiana State University/ Louisiana Transportation Research Center has implemented a field-rugged continuous intrusion miniature cone penetration test (CIMCPT) system since the 1990s. The miniature cone penetrometer of the CIMCPT system has a cross-sectional cone area of $2cm^2$ allowing finer soil profiles compared to the standard $10cm^2$. The reduced cross-sectional area also enables a system capacity reduction leading to cost saving and ease in maintenance. In addition, the continuous intrusion mechanism allows fast and economic site investigations. Samsung C&T Corporation has recently implemented a similar CIMCPT system. In this study, case studies on the field application of Samsung CIMCPT system for the last 2 years are presented to illustrate its performance investigation and its usefulness and limitation. Results of the case studies show that the CIMCPT system can be applied to soils with cone tip resistance($q_c$) values up to about 30MPa and allows a reliable and useful way to characterize soft soils. The results also show that the rod buckling limits the investigation depth by the system and the large contact pressure of the CIMCPT truck prevents the use of the system at sites with soft surface soils. According to the results of the case studies, the Samsung CIMCPT system has been being upgraded with a miniature cone with a longer rod, a crawler-type transportation system, a pre-boring system, and so on.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.349-360
• /
• 2009

The cone penetration test(CPT) has gained its popularity in site characterization indebted by its reliability, speed, economy, and automatic measurement system since its development in the 1930s. The CPT results, commonly consisting of cone tip resistance, sleeve friction, and pore water pressure measurements, allow us to classify soils as well as to reveal their engineering characteristics. The site condition at which the CPT is allowable is often dependent on the capacity of a CPT system. In Korea, it has been considered that the CPT could be appled only to soft soils in most cases because CPT systems available for stiff soils are very rare due to their expensive procurement and maintenance cost. Luoisiana Transportation Research Center(LTRC) has developed and implemented a field-rugged continuous intrusion miniature cone penetration test(CIMCPT) system since the late 1990s. The miniature cone penetrometer has a sectional cone area of $2cm^2$ allowing system capacity reduction compared to the standard $10cm^2$ cone penetrometer. The continuous intrusion mechanism allows fast and economic site investigation. Samsung Engineering & Construction has recently developed and implemented a similar CIMCPT system based on its original version developed in LTRC. The performance of the Samsung CIMCPT system has been investigated by calibration with the standard CPT system at a well-characterized test site in Pusan, Korea. In addition, scale effect between the miniature cone penetrometer and the standard cone penetrometer has been investigated by comparing the field test results using the both systems.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2005.10a
• /
• pp.81-81
• /
• 2005

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2005.10a
• /
• pp.81-81
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.183-184
• /
• 2007

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.3
• /
• pp.429-438
• /
• 2018

Cone and T-bar penetrometers have been frequently used to estimate the undrained shear strength of clay. For small-size model tests, miniature penetrometers should be used but their correlation factors have not been well published. In this study, a testing setup was developed to derive empirical factors of the miniature cone and T-bar penetrometers. A 350mm-diameter chamber and kaolin clay were utilized to prepare soil specimens consolidated under four different pre-consolidation pressures controlling undrained shear strength. Two miniature cones with two diameters of 10-mm and 16-mm and a T-bar penetrometer with 10-mm diameter were used to investigate boundary effect, penetration rate effect, and diameter and shape effect. Unconsolidated-undrained triaxial tests were carried out with samples taken from the specimens to measure undrained shear strength. Finally, empirical factors for the penetrometers were constructed to correlate tip resistance to undrained shear strength.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.71-78
• /
• 2011

This study was undertaken to find out the effect of cholesterol and serum albumin on sperm ability and lipid peroxidation levels period to the liquid storage of miniature pig sperm. Ejaculated semen from miniature pigs was collected by gloved-hand method into a pre-warmed ($37^{\circ}C$) thermos bottle, and extended with Modena solution {with and without BSA, methyl-beta-cyclodextrin (-cholesterol) and cholesterol loaded cyclodextrin (+cholesterol)}. Each semen was assessed for viability (SYBR-14/PI staining) and acrosome intactness, intensity and capacitation status by chlorotetracycline (CTC) staining at 1, 3, 5, 7 and 10 days of storage. At for the effects of cholesterol and serum albumin on lipid peroxidation, semen were incubated with $H_2O_2$ ($10\;{\mu}M$), and lipid peroxidation level were measured by flow cytometry using the lipid peroxidation reporter probe $C_{11}-BODIPY^{581/591}$. The result, lipid peroxidation level in sperm added with cholesterol were lower in $10\;{\mu}M$ $H_2O_2$ compared to the added sperm with serum albumin. Also, added cholesterol to sperm had significant (p<0.05) higher viability when storage for 7 and 10 days and lower when 10 days of storage percentage of acrosome-reacted sperm (AR pattern) in acrosome state as say result compared to other treated groups. In conclusion, role of cholesterol during lipid storage in miniature pig spermatozoa was protected boar spermatozoa from lipid peroxidation prior to lipid storage. Addition serum albumin during lipid storage in sperm may be induce sperm membrane damage by lipid peroxidation. Therefore, addition of cholesterol to miniature pig sperm will be lead to extension of liquid storage periods.

• Reproductive and Developmental Biology
• /
• v.29 no.4
• /
• pp.247-252
• /
• 2005

The purpose of this study was to assess sperm quality during in vitro storage of miniature-pig semen in order to determine which extender should be used and how extender can be diluted for in vitro storage of miniature-pig semen. Freshly ejaculated miniature-pig's semen was diluted with same volumes of Beltsville Thawing Solution (BTS), Androhep, Modena, Mulberry III and modified-Modena extenders. Sperm quality was evaluated by examining viability, motility, abnormality, acrosome intactness, intensity and capacitation status by chlorotetracycline (CTC) staining. Sperm motility decreased with storage period prolonged and differences among BTS, Androhep, Modena and Mulberry III were apparent On Day 1, approximately 80% of the sperm were motile, but motility decreased to $40\%$ at Day 7. During the 7 days of storage, sperm survival in modified-Modena B extender was higher than another extenders. However, it was not differ significantly among other extenders. The percentage of F and B patterns were not differ significantly among the extenders. However, F pattern in modified-Modena B extender was slightly higher until 3 days of storage than that of Modena extender, modified-Modena A extender and modified-Modena C extender. The percentage of AR patterns in modified-Modena B extender was slightly lower, but did not differ significantly among other extenders. The results of present study suggest that modified-Modena B was effective as new extender for in vitro storage of miniature-pig semen.

• Reproductive and Developmental Biology
• /
• v.33 no.3
• /
• pp.133-137
• /
• 2009

Pluripotent embryonic stem (ES) cells isolated from inner cell mass (ICM) of blastocyst-stage embryos are capable of differentiating into various cell lineages and demonstrate germ-line transmission in experimentally produced chimeras. These cells have a great potential as tools for transgenic animal production, screening of newly-developed drugs, and cell therapy. Miniature pigs, selectively bred pigs for small size, offer several advantages over large breed pigs in biomedical research including human disease model and xenotransplantation. In the present study, factors affecting primary culture of somatic cell nuclear transfer blastocysts from miniature pigs for isolation of ES cells were investigated. Formation of primary colonies occurred only on STO cells in human ES medium. In contrast, no ICM outgrowth was observed on mouse embryonic fibroblasts (MEF) in porcine ES medium. Plating intact blastocysts and isolated ICM resulted in comparable attachment on feeder layer and primary colony formation. After subculture of ES-like colonies, two putative ES cell lines were isolated. Colonies of putative ES cells morphologically resembled murine ES cells. These cells were maintained in culture up to three passages, but lost by spontaneous differentiation. The present study demonstrates factors involved in the early stage of nuclear transfer ES cell isolation in miniature pigs. However, long-term maintenance and characterization of nuclear transfer ES cells in miniature pigs are remained to be done in further studies.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.15-20
• /
• 2013

This paper dealt with melting characteristics of low-voltage miniature cartridge fuse used for 220 V electronic equipment. The experimental sample is low-voltage miniature cartridge fuse with rating of 250 V(3A) and size of $5{\times}20$ mm. In order to evaluate melting and scattering characteristics of the fuse, we applied to 8/20 ${\mu}s$ surge current, overload current and external thermal stress such as flame of fire. From the experimental results, the fuse element was melted and scattered by applied surge current(above 0.79 kA) and overload current(above 4.5 A). It was also attached to the inner surface of the fuse tube. The fuse element was attached as a thin film on inner surface of fuse tube when large surge current was applied. It was confirmed, however, the fuse element was not changed by external thermal stress such as flame and hot-air.