• Anxiety and mood
• /
• v.3 no.1
• /
• pp.32-40
• /
• 2007

Objectives : To investigate the validity of an abbreviated self-rated Korean version of MINI (Mini International Neuropsychiatric Interview) patient health survey which screening social anxiety disorder, panic disorder, generalized anxiety disorder, and major depressive disorder. Methods : 115 subjects completed MINI and MINI patient health survey. The validity of MINI patient health survey was assessed by whether the results from MINI patient health survey were compatible with the results from MINI or not. The Cohen's kappa value, specificity, sensitivity, positive predictive value, and negative predictive value was calculated for this purpose. Results : The Kappa values of social anxiety disorder (0.60), panic disorder (0.49), generalized anxiety disorder (0.60) and major depressive disorder without other co-morbid disorder (0.59) were at least moderate in strength of agreement. Conclusion : The abbreviated self-rated Korean version of MINI patient health survey has the moderate to good validity in social anxiety disorder, panic disorder, generalized anxiety disorder, and major depressive disorder without other co-morbid disorders. Our result suggests that this instrument might be useful for screening above 4 disorders if it is used under careful supervision of experienced clinicians.

• Journal of the Korean Institute of Educational Facilities
• /
• v.13 no.4
• /
• pp.5-14
• /
• 2006

The purpose of this study is to suggest a model plan for a mini school using the lower part of the apartment. In order to reach this model, firstly, the existing condition of over populated schools is analyzed, secondly, the Proper size and planning module for a mini school are suggested through the analysis of 7th national curriculum for the education, and thirdly, the model plan for a mini school is suggested using the apartment under construction. Mini school will be expected to solve the problems from over populated schools, and enhance the educational effect for the primary students.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.73-74
• /
• 2015

IoT의 발달로 인해 새롭게 빅데이터와 그의 실시간 처리의 중요성이 증대되고 있다. 본 논문에서는 사물인터넷의 관제 및 데이터 처리 기능을 갖춘 SmartX-mini 센터를 통하여 NUC 클러스터의 빅데이터 처리 가능성을 제시하고, 이를 검증하기 위하여 SmartX-mini 테스트베드를 활용한다. SmartX-mini Center의 Spark 프레임워크를 이용한 실험을 통해 IoT 환경에서의 NUC 클러스터의 빅데이터 처리 가능에 대한 가능성을 검증하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.4
• /
• pp.182-186
• /
• 2016

Objectives: The purpose of this study was to analyze the incidence of indications for the removal of mini-plates over a five-year period in maxillofacial trauma patients. Materials and Methods: The medical records of 530 patients who underwent treatment with mini-plate fixation after maxillofacial trauma were reviewed for a five-year period (May 2007 to May 2012). Patients were evaluated concerning the number of mini-plates removed, age and gender distributions, time between insertion and removal, indication for removal, and site of removal. Results: The plates of 120 patients were removed (26 females and 94 males). The removal rate was 22.6%. The most frequent indication for removal was patient demand (81.7%), followed by tooth extraction (7.5%), and pain (3.3%). The most frequent removal site was the mandible (95.0%). Conclusion: The number of mini-plates removed was small, and the most common indication for removal was patient demand. There is no evidence to support a recommendation for the routine removal of titanium mini-plates.

• New & Renewable Energy
• /
• v.17 no.1
• /
• pp.7-18
• /
• 2021

This study analyzes the role of market actors in the energy transition process and the interaction between them and ordinary citizens, primarily focusing on the mini-PV project in Seoul. The study also proposes measures to harness market actors' activities and successfully implement the distribution of mini-PV systems in Seoul. In this study, practice theory is used as a theoretical resource to analyze the interaction between market actors and civil society actors and to help understand how market actors influence the decisions of regular citizens in installing mini-PV at their properties. After conducting surveys and hosting in-depth interviews with ordinary citizens and market actors, it was found that to further promote the role of market actors, the Seoul Metropolitan Government should actively support and monitor the public relations activities of market actors, while concurrently managing selected companies and establishing relevant administrative systems for continued effective use post-installation of mini-PV systems. In future studies of the energy transition process, market actors should also be recognized as key players, along with government and civil society actors, and their roles should be studied in a balanced way.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.139-145
• /
• 2012

The purpose of this study was to evaluate the accuracy of Root ZX and Sybron Mini in determining the working length using 2.5% Sodium Hypochlorite, 2% Chlorhexidine gel and saline. Donnelly's gelatin technique was used for measuring twenty extracted human teeth. Electronic working length was measured at the display 0.5 and 0.0 level of each electronic apex locator using a digital caliper to the nearest 0.01 mm. Each measurement was repeated for each different irrigants. Accuracy of Sybron Mini was not significantly different from the Root ZX in the three different irrigants, and there was no significant difference in the accuracy of electronic apex locators among the irrigants when used as recommended by manufacturer (measuring electronic working length at 0.0 level of Sybron Mini and at 0.5 level of Root ZX).

• Imaging Science in Dentistry
• /
• v.47 no.3
• /
• pp.141-147
• /
• 2017

Purpose: The objective of this study was to compare the outcomes of surgical mini-implant placement when potential mini-implant sites were scanned using a lower-dose $180^{\circ}$ acquisition protocol versus a conventional $360^{\circ}$ acquisition protocol. Materials and Methods: Ten dentate human skulls were used to provide sites for potential mini-implant placement. The sites were randomly divided into 2 groups: $360^{\circ}$ and $180^{\circ}$ cone-beam computed tomography (CBCT) acquisition protocols. A small-volume $180^{\circ}$ CBCT scan and a $360^{\circ}$ CBCT scan of each site were acquired using a Morita Accuitomo-170 CBCT machine and then a mini-implant was placed. A follow-up $360^{\circ}$ CBCT scan was done as a gold standard to evaluate the location of the mini-implant and root perforation. Two raters evaluated the scans. Results: Ninety-eight percent of the mini-implants placed did not perforate any root structure. Two percent of the sites had an appearance suggestive of perforation. On a Likert scale, both raters agreed that their subjective evaluation of the diagnostic quality of the protocols, ability to make and read measurements of the sites, and preferences for the specified diagnostic task were comparable. The Cohen kappa showed high inter-rater and intrarater agreement. Conclusion: In this ex vivo study, we found that the $180^{\circ}$ rotational acquisition was as effective as the conventional $360^{\circ}$ rotational acquisition for the preoperative evaluation of potential mini-implant sites.

• The korean journal of orthodontics
• /
• v.44 no.4
• /
• pp.177-183
• /
• 2014

Objective: To determine the unique contribution of geometrical design characteristics of orthodontic mini-implants on maximum insertion torque while controlling for the influence of cortical bone thickness. Methods: Total number of 100 cylindrical orthodontic mini-implants was used. Geometrical design characteristics of ten specimens of ten types of cylindrical self-drilling orthodontic mini-implants (Ortho Easy$^{(R)}$, Aarhus, and Dual Top$^{TM}$) with diameters ranging from 1.4 to 2.0 mm and lengths of 6 and 8 mm were measured. Maximum insertion torque was recorded during manual insertion of mini-implants into bone samples. Cortical bone thickness was measured. Retrieved data were analyzed in a multiple regression model. Results: Significant predictors for higher maximum insertion torque included larger outer diameter of implant, higher lead angle of thread, and thicker cortical bone, and their unique contribution to maximum insertion torque was 12.3%, 10.7%, and 24.7%, respectively. Conclusions: The maximum insertion torque values are best controlled by choosing an implant diameter and lead angle according to the assessed thickness of cortical bone.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.5
• /
• pp.240-245
• /
• 2015

Objectives: This study was performed to evaluate patterns of failure time after insertion, failure rate according to loading time after insertion, and the patterns of failure after loading. Materials and Methods: A total of 331 mini-implants were classified into the non-failure group (NFG) and failure group (FG), which was divided into failed group before loading (FGB) and failed group after loading (FGA). Orthodontic force was applied to both the NFG and FGA. Failed mini-implants after insertion, ratio of FGA to NFG according to loading time after insertion, and failed mini-implants according to failed time after loading were analyzed. Results: Percentages of failed mini-implants after insertion were 15.79%, 36.84%, 12.28%, and 10.53% at 4, 8, 12, and 16 weeks, respectively. Mini-implant failure demonstrated a peak from 4 to 5 weeks after insertion. The failure rates according to loading time after insertion were 13.56%, 8.97%, 11.32%, and 5.00% at 4, 8, 12, and 16 weeks, respectively. Percentages of failed mini-implants after loading were 13.79%, 24.14%, 20.69%, and 6.9% at 4, 8, 12, and 16 weeks, respectively. Conclusion: Mini-implant stability is typically acquired 12 to 16 weeks after insertion, and immediate loading can cause failure of the mini-implant. Failure after loading was observed during the first 12 weeks.