• Title/Summary/Keyword: milled/brown rice ratio

Search Result 48, Processing Time 0.023 seconds

A Study on Conditioning of the Brown Rice (II) -Milling characteristic with eight hours′ripeness after conditioning moisture content- (현미 조절에 관한 연구(II) -함수율 조질 후 8시간 숙성에 따른 정백특성-)

  • 한충수;강태환;조성찬;고학균
    • Journal of Biosystems Engineering
    • /
    • v.27 no.1
    • /
    • pp.51-58
    • /
    • 2002
  • The goal of this research was to an optimum conditions for the brown rice conditioning from data of milling characteristics after conditioning of the brown rice. The range of the initial moisture content of the sample was 13%, 14%, and 15%, the range of the increment of the moisture content was 0.4% and 0.8% with respect to the initial moisture content, and a ripe time after conditioning was eight hours. The results obtained from this research can be summarized as fellows. 1 The crack ratio after conditioning the brown rice with the initial moisture content was increased as the initial moisture content decreased and increment of the moisture content increased. The crack ratio of the milled rice was increased than that of the non-conditioned brown rice and decreased with the conditioned brown rice with the increment of the moisture content of 0.4% and 0.5%. 2. The broken rice ratio after conditioning the brown rice with the initial moisture content was a little higher than that of the non-conditioned brawn rice. The broken ratio of the conditioned brown rice with the increment of the moisture content of 0.4% was increased around 0.2∼0.4% with respect to the non-conditioned brown riced and the broken ratio of the brown rice was high with increased amount of water sprayed during conditioning process. 3. The moisture content of the milled rice after conditioning the brown rice with the initial moisture content increased around 0.3∼0.8% with respect to the non-conditioned milled rice. 4. The electric energy consumption on milling process with the conditioned brown rice by the initial moisture content was decreased 3.4∼39.1% with respect to the non-conditioned brown rice.

Morphological Characters of Tongil and Japonica Type of Rice Grains (통일형과 일반형 쌀의 형태적특성연구)

  • Lee, Bong-Yong;Kim, Yong-Bae;Ushio, Matuskura;Shinjiro, Chikubu
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.34 no.4
    • /
    • pp.384-389
    • /
    • 1989
  • Thirteen varieties of Tongil type and ten of Japonica type which were produced in Korea, in 1985, were campa red in namely, width, thickness, length and weight of rice grains. Thousand-grain weight of paddy, brown rice and milled rice were not significantly different between Tongil type and Japonica type, but difference of paddy-brown rice and brown rice-milled rice had significant (p<2,859** and 4.316***, respectively), and the ratio of difference of paddy-brown rice was higher Tongil type than Japonica type. Width, thickness and length of paddy, brown rice and milled rice was significant (width : p<5.189***, 5.289** and 5.466***, thickness: p<3.371** 4.074*** and 5.988***, length: p<3.016**, 4.419*** and 5.492*** in paddy, brown rice and milled rice, respectively) between the Tongil type and Japonica type, and then the width and thickness of Japonica type were thicker than Tongil type, but length of Japonica type was shorter than Tongil type width/thickness ratio of paddy wes significant (p<2.396*) between the Tongil type and Japonica type, but its brown rice and milled rice was not. And length/width and length/ thickness ratio of paddy, brown rice and milled rice were significant (length/width : p<5.525***, 5.495*** and 5.863***, length/thickness: p<4.734***, 6,863*** and 8.425*** in paddy, brown rice and milled rice) between the Tongil type and Japonica type, and then its ratio were higher Tongil type than Japonica type.

  • PDF

The Effect of Milling on the Nutrients of Raw and Parboiled Rices (파보일미(parboiled rice)의 이화학적 특성 1. 추청벼 파보일미의 도정 및 영양특성)

  • 양미옥;조은자
    • Korean journal of food and cookery science
    • /
    • v.11 no.1
    • /
    • pp.51-57
    • /
    • 1995
  • The effect of milling on the nutrients of raw and parboiled rice grain samples was investigated. Parboiling treatments of choo chung paddy decreased head rice yields and pressure parboiling proved to be more beneficial in reducing white belly rice. Except PP sample mean length/width ratio of parboiled milled rice kernels(8% milling degree) were more larger than raw milled rice and the extent depended on severity of parboil heat treatment. Parboiling had no effect on the protein content of browm rice(0% milling degree) but increased in 4%, 8% milling degree and in PL40 sample. Parboiled rice had a lower fat and the extent depended on degree of milling. Ash content of parboiled brown rice decreasd compared to raw brown rice and generally decreased according to milling degrees were high. Nevertheless, PP, PT40 and PL40 parboiled milled rice samples(0% milling degree) contained more ash than raw milled rice. Parboiling increased total sugar and reducing sugar and increased according to milling degrees were high. Parboiled rice had a high reducing sugar content than raw rice except for PT sample, and more contained as higher milling degree. Total amino acid content of parboiled brown rice increased compared to raw brown rice except for PL40 sample. Parboiled rice of 4% milling degree had a lower total amino acid content and then 8% milling degree had a higher than raw rice. Ca content of parboiled rice was lower than raw rice and tended to have lower as milling degree were high. Parboiled rice of 0 and 4% milling degree had a lower Fe content degree but higher in 8% milling degree. PP and PT40 samples contained more Fe than any other parboiled rice. Parboiled milled rice contained more thiamin than raw milled rice. Rice of milling degree 6% and PL sample contained most thiamin.

  • PDF

Determination of Whiteness Condition for Efficient Milling in Rice Processing Complex (RPC에서 효율적인 도정을 위한 백도조건 결정)

  • Kim O. W.;Kim H.;Kim D. C.;Kim S. S.
    • Journal of Biosystems Engineering
    • /
    • v.30 no.4 s.111
    • /
    • pp.242-248
    • /
    • 2005
  • There was no useful milling standard to produce high quality milled rice efficiently and adequately in Rice Processing Complex. Therefore, the whiteness of milled rice produced Rice Processing Complexes were different according to Rice Processing Complexes and milling periods at the same Rice Processing Complex. This research was carried out to contribute the production and distribution of high quality milled rice through determination of whiteness condition of milled rice as a milling stndard based on degree of bran removal using New $May-Gr\ddot{u}wald$ reagent dyeing method and taste of cooked rice. The optimum whiteness value of milled rice for efficient milling in Rice Processing Complex was found to be from 40 to 41, while the degree of milling was from $8.9\%\;to\;9.2\%.$ At this whiteness condition, the first derivative of whiteness value according to degree of milling was higher than the average value from brown rice to well milled rice, and the broken kernel ratio was from $3.0\%\;to\;3.4\%.$ This whiteness condition ($40\~41$) could be considered as a milling condition in Rice Processing Complex.

Effects of Abnormal Kernels in Brown Rice on Milling Characteristics (현미 비정상립이 도정특성에 미치는 영향)

  • Kim, Chang-Jin;Lee, Hyun-Jeong;Kim, Oui-Woung;Keum, Dong-Hyuk;Kim, Hoon
    • Journal of Biosystems Engineering
    • /
    • v.32 no.1 s.120
    • /
    • pp.1-5
    • /
    • 2007
  • This study was conducted to find out effects of abnormal kernels of 0 to 30% in brown rice on quality characteristics during milling using friction type test mill. The average hardness values of abnormal and normal brown rice kernels were 6.52 kg$_f$, 8.48 kg$_f$, respectively. According to the increase of abnormal kernels in brown rice, grain temperature, required electrical energy, the broken kernels ratio, and the weight of solid matter on the surface of milled rice were increased due to crush of the abnormal kernels during milling, which proves that abnormal kernels in brown rice should be removed before milling to improve milling characteristics.

Yield of Rice Affected by Meteorological Elements in Yeosu Area of Korea

  • Kwon, Byung-Sun;Choi, Seong-Kyu;Shin, Jeong-Sik;Shin, Jong-Sup;Shin, Dong-Young;Hyun, Kyu-Hwan;Kuk, Yong-In;Park, Hee-Jin
    • Plant Resources
    • /
    • v.6 no.2
    • /
    • pp.134-139
    • /
    • 2003
  • This study was conducted to investigate the relationships between yearly variations of meteorological elements and yearly variations of productivity in rice. In addition, correlation coefficients among yield and yield components were used to find out the relationships between meteorological elements and productivity. Yearly variation of the mean air temperature in May was large with coefficients of variation(C.V.) of 25.0%, but the variation of the duration of sunshine in May were relative small. No. of panicles per hill and 1,000 grains wt. of brown rice were great with C.V. of 21.1, 19.7%, respectively, brown rice yield show more or less C.V. of 5.5% and milled rice show still less variation. Correlation coefficients between temperatures in period of cultivation from May and yield were positive correlations. Correlation Coefficients between precipitation in period of cultivation from Sep. to Oct. and yield are positive correlations. Correlation coefficients amount the panicle length, no. of panicles, no. of spikelets, ratio of ripened grains, 1,000 grains wt. of brown rice, milled rice yield, brown rice yield and milled rice yield were positively significant at the level of 1 %, respectively.

  • PDF

Physicochemical Characteristics and Varietal Improvement Related to Palatability of Cooked Rice or Suitability to Food Processing in Rice (쌀 식미 및 가공적성에 관련된 이화학적 특성)

  • 최해춘
    • Proceedings of the Korean Journal of Food and Nutrition Conference
    • /
    • 2001.12a
    • /
    • pp.39-74
    • /
    • 2001
  • The endeavors enhancing the grain quality of high-yielding japonica rice were steadily continued during 1980s∼1990s along with the self-sufficiency of rice production and the increasing demands of high-quality rices. During this time, considerably great, progress and success was obtained in development of high-quality japonica cultivars and qualify evaluation techniques including the elucidation of interrelationship between the physicochemical properties of rice grain and the physical or palatability components of cooked rice. In 1990s, some high-quality japonica rice caltivars and special rices adaptable for food processing such as large kernel, chalky endosperm aromatic and colored rices were developed and its objective preference and utility was also examined by a palatability meter, rapid-visco analyzer and texture analyzer. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice and the palatability of cooked rice. The water/rice ratio (in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was average to 2.63(in v/v basis). The major physicochemical components of rice grain associated with the palatability of cooked rice were examined using japonica rice materials showing narrow varietal variation in grain size and shape, alkali digestibility, gel consistency, amylose and protein contents, but considerable difference in appearance and torture of cooked rice. The glossiness or gross palatability score of cooked rice were closely associated with the peak. hot paste and consistency viscosities of viscogram with year difference. The high-quality rice variety “Ilpumbyeo” showed less portion of amylose on the outer layer of milled rice grain and less and slower change in iodine blue value of extracted paste during twenty minutes of boiling. This highly palatable rice also exhibited very fine net structure in outer layer and fine-spongy and well-swollen shape of gelatinized starch granules in inner layer and core of cooked rice kernel compared with the poor palatable rice through image of scanning electronic mcroscope. Gross sensory score of cooked rice could be estimated by multiple linear regression formula, deduced from relationship between rice quality components mentioned above and eating quality of cooked rice, with high Probability of determination. The ${\alpha}$ -amylose-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, shelved the relatively fast deterioration of cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogiadation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked rice. The softer gel consistency and lower amylose content in milled rice revealed the higher ratio of popped rice and larger bulk density of popping. The stronger hardness of rice grain showed relatively higher ratio of popping and the more chalky or less translucent rice exhibited the lower ratio of intact popped brown rice. The potassium and magnesium contents of milled rice were negatively associated with gross score of noodle making mixed with wheat flour in half and the better rice for noodle making revealed relatively less amount of solid extraction during boiling. The more volume expansion of batters for making brown rice bread resulted the better loaf formation and more springiness in rice bread. The higher protein rices produced relatively the more moist white rice bread. The springiness of rice bread was also significantly correlated with high amylose content and hard gel consistency. The completely chalky and large gram rices showed better suitability for fermentation and brewing. Our breeding efforts on rice quality improvement for the future should focus on enhancement of palatability of cooked rice and marketing qualify as well as the diversification in morphological and physicochemical characteristics of rice grain for various value-added rice food processings.

  • PDF

Changes in Contents of Nutritional Components and Eating Quality of Brown Rice by Pericarp Milling (과피층 제거에 따른 현미의 이화학특성 및 현미밥의 식감변화)

  • Kim, Hye-Won;Oh, Sea-Kwan;Kim, Dae-Jung;Yoon, Mi-Ra;Lee, Jeong-Heui;Choi, Im-Soo;Kim, Yeon-Gyu;Cha, Kil-Nam
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.57 no.1
    • /
    • pp.35-40
    • /
    • 2012
  • In this study, the effect of degree of milled wax layer on compositions (protein and total dietary fiber content), Alkali Digestion Value (ADV), and texture (hardness, stickiness, toughness, and adhesiveness) with brown rice was investigated. For all the rice cultivars, $Baegjinju$, $Keunnun$, $Samkwang$, and $Seolgaeng$, protein content decreased significantly as the degree of pericarp milling increased ($p$<0.05). Total dietary fiber (TDF) content for $Keunnun$ (9.56%${\rightarrow}$8.09%) and $Samkwang$ (8.05%${\rightarrow}$7.06%) significantly decreased with the degree of removed wax layer. ADV was not affected by being removed wax layer, but ADV of $Samkwang$ was increased from 3.56 to 6.78. As the degree of removed wax layer increased (0%${\rightarrow}$10%), hardness and toughness of cooked brown rice were decreased but stickiness and adhesiveness was increased. The ratio of adhesiveness to hardness was increased with decreased wax layer of brown rice. Accordingly, It suggests that the regulation of the wax layer with brown rice was effected texture of cooked brown rice. The milling technology in wax layer of brown rice is that might be thought to be very useful in rice processing industry.

Milling characteristics of cutting-type rice milling machine according to the rotating speed of the main shaft

  • Cho, Byeong-Hyo;Han, Chung-Su;Kang, Tae-Hwan;Lee, Dong-Il;Won, Jin-Ho;Lee, Hee-Sook
    • Korean Journal of Agricultural Science
    • /
    • v.44 no.3
    • /
    • pp.416-423
    • /
    • 2017
  • This study aimed to identify milling characteristics depending on the rotating speed of the main shaft of the cutting-type rice milling machine which can minimize the conventional milling process. Brown rice, which was produced in Gunsan-si, Jeollabuk-do, Republic of Korea, in 2016, was used as the experimental material. The milling characteristics of white rice were measured under four different rotating speeds of main shaft: 950 - 1,050 rpm, 1,000 - 1,100 rpm, 1,050 - 1,150 rpm, and 1,100 - 1,160 rpm. For each shaft speed, 300 kg of brown rice was processed, and the milling characteristics were measured according to the whiteness, grain temperature, cracked rice ratio, broken rice ratio, turbidity, and energy consumption. The whiteness of rice grain was found to be consistent at around $40{\pm}0.5$ only when milled at the shaft speed of 950 - 1,050 or 1,000 - 1,100 rpm. The grain temperature during the milling process increased by 11.35 to $11.85^{\circ}C$, showing little differences amongst shaft speeds. The cracked rice ratio increased by 8.2 to 10.4% at all conditions. The broken rice ratio ranged from 0.58 to 0.76%, reflecting a low level. The turbidity after milling was 54.8 ppm when milled at 1,000 - 1,100 rpm. Energy consumption of 12.98 and 12.18 kWh/ton were recorded at the shaft speed of 1,000 - 1,100 and 1,050 - 1,150 rpm, respectively. The result of this study indicates that the optimal rotating speed of main shaft would be 1,000 - 1,100 rpm for a cutting-type rice milling machine.

Effect of Low Radiation During Grain Filling Stage on Rice Yield and Grain Quality (등숙기 일사 저하가 쌀 수량 및 품질에 미치는 영향)

  • Kim, Ki-Young;Ko, Jong-Cheol;Shin, Woon-Cheol;Park, Hyun-Su;Baek, Man-Kee;Nam, Jeong-Kwon;Kim, Bo-Kyeong;Lee, Jeom-Ho
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.59 no.2
    • /
    • pp.174-180
    • /
    • 2014
  • This study was conducted to know the effect of low radiation during grain filling stage of rice on its grain yield, components, physicochemical properties and palatability, compared to the effect of natural light. Ripened grain ratio, 1000 grain weight of brown rice, milled rice yield of Mipum, Hopum, and Sindongjin were reduced as the shading treatments become higher. After harvest, physicochemical properties of rice influencing eating quality were investigated. Protein content of milled rice was increased, but palatability was decreased by shading treatments. Change of milled rice proteins and palatability due to shading treatments were found to be less in Mipum than that in Hopum and Sindongjin. With regard to amylogram properties, shading treatments resulted in a significant decrease in peak trough final breakdown viscosities of rice flour, though it increased pasting temperature and setback viscosity. The degree of the 55% shading effect was more intensive than the 35% shading effect in changes of ripened grain ratio, 1000 grain weight of brown rice, milled rice yield and milled rice protein.