• Journal of Pharmacopuncture
• /
• v.25 no.2
• /
• pp.121-129
• /
• 2022

Objectives: The chemical composition of cactus pear seed oil (Opuntia ficus-indica [L.] Mill.) was analyzed in terms of its fatty acid composition, tocopherol content, phenolic identification, and the oil's phenolic-rich fraction antioxidant power was determined. Methods: Fatty acid profiling was performed by gas chromatography coupled to an FI detector. Tocopherols and phenolic compounds were analyzed by LC-FLD/UV, and the oil's phenolic-rich fraction antioxidant power was determined by phosphomolybdenum, DPPH assay and β-carotene bleaching test. Results: Fatty acid composition was marked by a high unsaturation level (83.22 ± 0.34%). The predominant fatty acid was linoleic acid (66.79 ± 0.78%), followed by oleic acid (15.16 ± 0.42%) and palmitic acid (12.70 ± 0.03%). The main tocopherol was γ-tocopherol (172.59 ± 7.59 mg/kg. In addition, Tyrosol, vanillic acid, vanillin, ferulic acid, pinoresinol, and cinnamic acid were identified as phenolic compounds in the analyzed seed oil. Moreover, the oil's phenolics-rich fraction showed a significant total antioxidant activity, scavenged DPPH up to 97.85%, and effectively protected β-carotene against bleaching (97.56%). Conclusion: The results support the potential use of cactus pear seed oil as a functional food.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.151-157
• /
• 2013

This study was conducted to investigate the effect of mature stages on quality of Rafito tomatoes (Lycopersicon esculentum Mill.) during storage at low temperature. Tomatoes grown in greenhouse were harvested at three different mature stages (turning, pink, and red), packaged with a 30-${\mu}m$-thick polyethylene film, and then stored at 5 and $10^{\circ}C$, respectively. The changes in firmness, soluble solids content (SSC), titratable acidity (TA), colour, lycopene content, decay, and chilling injury were measured on a weekly basis. After three weeks of storage, chilling injury and decay were found to have individually occurred at 5 and $10^{\circ}C$, respectively. As there was little change in quality at $5^{\circ}C$, it was concluded that red tomatoes could maintain their good quality for two weeks. The normal postharvest ripening was inhibited in the turning and pink tomatoes during storage at $5^{\circ}C$. The turning and pink tomatoes showed improved quality after two-week storage at $10^{\circ}C$. In particular, the turning fruits showed the highest firmness throughout the storage period. Furthermore, the red colour, SSC/TA, and lycopene content of the turning fruits reached the same levels as with the red fruits after two-week storage at $10^{\circ}C$. These results suggest that red tomatoes should be stored at $5^{\circ}C$ to inhibit decay, and that the optimum temperature for early-harvested tomato (turning and pink) is $10^{\circ}C$ for the ripening process after harvest.

• Korean Journal of Plant Resources
• /
• v.33 no.5
• /
• pp.436-445
• /
• 2020

Goji berry (Lycium chinense Mill.) is one of medicinal plants. Its leaves has been used to manufacture the functional foods by replacing the dried-fruit because of low production costs. In order to produce the leaves of uniform quality, continuous selection and the establishment of cultivation techniques were required. Among the eleven recommended cultivars, 'Myeongan' showed high yielding and rapid regeneration after cutting. The dried-leaf yield was linearly increased from 106 kg/10a on May 16 to 287 kg/10a on June 20. An appropriate cutting date and cutting length (about 60-70 cm) was important factors for its efficient regeneration. The late cutting times were not suitable due to difficulties during plant harvesting because of stem rigidity and thorn generation. The betaine content of leaves ranged from 1.43 ~ 2.63% and significantly affected by the varieties and the cutting dates. The main physiological functionality of leaf was Angiotesin-1-converting enzyme (ACE) inhibitory activity, representing the anti-hypertensive. The other physiological functionalities, XOD inhibitory activity, antioxidant activity, tyrosinase inhibitory activity, SOD-like activity, α-glucosidase inhibitory activity and fibrinolytic activity, were not detected or less than 20%.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.68-73
• /
• 1995

This study was carried out to investigate the effect of the concentration of nutrient solution on growth of tomato(Lrcopersicon esculentum Mill. cv. seokwang) in substrate culture. The substrates used in the experiment were perlite, vermiculite, and peatmoss. Tomato plants were treated with different concentrations of nutrient solution, viz. 0.5, 1.0, 2.0, 3.0, and 5.0mS/cm at seedling stage and transferred to different treatments, 1.0, 2.0, and 3.0mS/cm after transplanting in each substrate. Total fruit number, total yield, marketable fruit number, and marketable yield were much higher at 2.0-3.0mS/cm than at 1.0mS/cm in all three substrate culture. The percentage of malformed fruit was in order of peatmoss>perlite> vermiculite and Vitamin C content was vermiculite> perlite> peatmoss. In all three substrate culture, high marketable yield was shown when tomato plants grew with concentration of 2.0-5.0mS/cm at seedling stage and 2.0-3.0mS/cm after transplanting. The concentrations of nutrient solution after transplanting as well as at seedling stage had a great influence on total yield, marketable yield, and soluble solids. However total and marketable fruit number were considerably affected by the concentrations of nutrient solution after transplanting.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.276-276
• /
• 2017

This study was examined to establish a conditions for producing Tteokbokki using dry-milling rice flour which can save manpower and labor time. Since the cost of producing rice flour milled in a wet condition is 500 to 700 won/kg, which is more than twice as much as that of 300 won wheat flour, it is necessary to directly make rice flour from raw rice. The dry-milling rice flour used in the experiment was produced by Air mill (Nara machinary co. ltd., Tokyo, Japan) from 5 rice cultivars (Samkwang, Dasan-1, Boramchan, Seolgaeng, Hanareum-2), which were cultivated in A-san in 2015 year. Their particle sizes were 50, 100 and $150{\mu}m$ for each cultivar, respectively. A control was a wet-milled rice flour milled with a roll mill after the rice was soaked in water for 4 hours. The moisture content of dry-milling rice flour based on cultivars was 11 ~ 12%, and added water up to 50~55% of dry-milling rice flour weight. The RVA characteristic of peak viscosity was the highest in Dasan-1 and Hanareum-2, the lowest in Seolgaeng. The setback value used as an indicator of aging was the highest in Dasan-1, therefore Dasan-1 was expected to be quick solidification, resulting in the low tendency of sensory evaluation. The damaged starch was high in Dasan-1 and Boramchan (p<0.05) compared to others. The Hunter color L were no significant among cultivars and b value increased in all cultivars of dry-milling rice flour compared with control. The hardness of dry-milling rice flour was higher than that of the control, especially Dasan-1 and Hanareum-2 were the highest. Based on the sensory evaluation, the best cultivars were Boramchan, Hanareum-2 and Samkwang. The overall preference of dry-milling rice flour was good in particle size of 50~100um.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.487-492
• /
• 2002

Low-fat and sugar-free (LFSF) cookies were developed for patients with metabolic syndrome X, such as obesity, diabetes, coronary heart disease, and hypertention, using artificial sweeteners (mixture of aspartame and saccharin), pectin and herb extracts such as Polygonatum Odoratum (Mill) Druce, Schizandrae Fructus and Lycii Fructus, without sugar and fats. LFSF cookies were composed of 7.5 : 1 of aspartame and saccharin, 5% pectin, 49% protein, and 5% herb extracts, with reduced fat level. The values for area under the curve in oral glucose tolerance tests were significantly lower in 90% pancreatomized-(Px, n = 8) and sham - operated (Sham, n = 8) rats which consumed LFSF cookies, than the control, which consumed regular cookies. Blood glucose levels were higher and the peak levels were significantly lower in the LFSF cookies group than the control group of Px and Sham rats. Blood glucose levels of healthy female college students (n = 10) at 30 and 60 min after the consumption of 30 g LFSF and regular cookies were not different, but they were significantly lower in the LFSF-cookies group in diabetes patients (n = 10). In conclusions, LFSF cookies was considered as a good snack for diabetic patients.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.281-286
• /
• 1988

These studies were conducted to find out the polishing methods that improve yield and quality of the polished barley. Four varieties of hulled barley, Dongbori 1. Bunong, Kangbori and Suwon 182 which were produced in Suwon, Korea in 1979, were subjected to this experiment. The polishing machine, manufactured by Satake Co, was used as test mill. Increasing the roller speed of polishing machine causes more polished barley in a unit period. The speed influenced more in length than thickness or width of grain. Therefore the shape of grain became bold type as the speed increased. The optimum roller speed was 1,300rpm in ideal shape of polished barley. The lowest hardness was observed in the husk layer and the hardness was found in the decreasing order of the aleurone, testa, peri carp and the endosperm layer. The thickness of bran layer, weight of 1,000 kernel and hardness of polished barley were greatly different according to barley varieties. Also the length, thickness, width and the ratio of length to width of barley grain were significantly different in barley varieties. The ratio of length to width of the polished barley was 1.59 in Suwon 182, 1.53 in Bunong, 1.51 in Kangbori and 1.26 in Dongbori 1.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.47-52
• /
• 2008

This study was carried out to improve the rice grain quality of Ilpum cultivar, especially to reduce the chalky rice rate by controlling top dressing of nitrogen application ratio at the tillering and panicle initiation stage. In the rice plant growth, the number of tiller and leaf area index of maximum tillering stage were influenced by basal dressing and top dressing at tillering stage; however those of heading stage were mainly influenced by top dressing at panicle initiation stage. In yield and yield components, they were influence by the top dressing at panicle initiation stage and the rice yield was increased by percentage of the top dressing. The protein content of rice grain was increased as the rate of top dressing at panicle initiation stage was increased. The rate of chalky and damaged rice was remarkably increased as the top dressing ratio was increased, resulting in reducing the rate of head rice rate. As the results, the characteristics of milling and rice quality was improved when the amount of top dress was reduced as 50% at the panicle initiation stage, and the yield of head rice also increased.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.181-187
• /
• 2002

The overall objective of this study was to improve tomato fruit quality, while maximizing yield. The variety of 'Momotaro' was grown in the basic nutrient solution of 1.6 dS.m$^{[-10]}$ which was supplemented by three levels of seawater with EC 1.0, 2.0 or 3.0 dS.m$^{[-10]}$ . Tomato plants were cultivated in cool seasons. Plant growth characteristics were compared between treatments, and fruits were classified to analyse fruit quality characteristics according to ripening stages： MG, Br, Br＋3, Br＋5, Br＋7 and Br＋10. Adding seawater generally did not affect the shoot growth parameters such as plant height, leaf length, leaf width, internode length and chlorophyll content. Adding seawater negatively affected yield parameters such as the height and weight of fruit, marketable fruit weight per plant and marketable fruit yield. Therefore, the more yield reduction was obtained with the increasing level of seawater treatment. Fruit quality was improved by seawater treatment. The degree of the effect for $^{\circ}$Bx degree and sugars were the highest with the EC of seawater 2.0~3.0 dS.m$^{[-10]}$ , and at the Br＋5~Br＋7 of ripening stages. The relative abundance of tomato flavor, volatile components, was not generally affected by the seawater treatment with an exception of 6-methyl-5-hepten-2-one. The relative abundance of most volatile components increased as ripening progressed. The increment began at the Br stage and showed the highest increment at the Br＋5~Br＋7 stages. The results from these experiments suggest that seawater treatment of EC 3.6 dS.m$^{[-10]}$ for hydroponics is good for improving tomato quality. Fruit quality is the best at the Br＋5~Br＋7 ripening stages. It is considered that these results may be applied far use in hydroponic culture to improve fruit quality with minimum yield reduction.