• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.169-177
• /
• 2012

Distribution of the local properties in GdBCO and YBCO coated conductors was investigated using Low-temperature Scanning Laser and Hall Probe Microscopy (LTSLHPM). We prepared GdBCO and YBCO coated conductors to study the spatial distribution of the current density in a single bridge. Inhomogeneity of the ${T_c}^{max}$ in the bridge was analyzed from experimental results of Scanning Laser Microscopy (SLM) near the superconducting transition. The local transport and screening current in the bridge were also investigated using Scanning Hall Probe Microscopy (SHPM). A series of line scans of SLM of the GdBCO and YBCO sample showed that lines with more inhomogeneous distributions of ${\delta}V$ had more inhomogeneous distributions of ${T_c}^{max}$. The defect of the superconducting layer of the GdBCO sample caused by damage to the substrate affected the current flow. And we could analyze the redistribution of the current density using SLM and SHPM.

• Applied Microscopy
• /
• v.45 no.3
• /
• pp.183-188
• /
• 2015

Due to the miniaturization of semiconductor devices, their crystal structure on the nanoscale must be analyzed. However, scanning electron microscope-electron backscatter diffraction (EBSD) has a limitation of resolution in nanoscale and high-resolution electron microscopy (HREM) can be used to analyze restrictive local structural information. In this study, three-dimensional (3D) automated crystal orientation and phase mapping using transmission electron microscopy (TEM) (3D TEM-EBSD) was used to identify the crystal structure relationship between an epitaxially grown CdS interfacial layer and a $Cu(In_xGa_{x-1})Se_2$ (CIGS) solar cell layer. The 3D TEM-EBSD technique clearly defined the crystal orientation and phase of the epitaxially grown layers, making it useful for establishing the growth mechanism of functional nano-materials.

• Applied Microscopy
• /
• v.44 no.2
• /
• pp.79-82
• /
• 2014

Aluminum nitride (AlN) powder was easily synthesized by the direct nitridation of Al melt containing ~20 wt.% Mg catalyst and the nitriding behavior was investigated by thermodynamic calculation and through observations of electron microscopy and X-ray diffraction. The addition of Mg catalyst decreased the nitriding temperature below $1,000^{\circ}C$, which is comparable to the high nitriding temperature of $1,400^{\circ}C$ required in carbothermal method. It was caused by a significant increase of the solubility of nitrogen gas due to the increase of Mg catalyst in Al melt. The dissolved nitrogen gas met Mg catalyst and was transformed into metastable $Mg_3N_2$. Finally the metastable phase reacted with Al to AlN.

• Journal of the Korean Society of Visualization
• /
• v.13 no.3
• /
• pp.15-19
• /
• 2015

We developed a high-throughput microscopy (HTM) method which enabled us to replace a conventional phase contrast microscopy (PCM) method that has been used as a standard analytical method for airborne asbestos. We could obtain the concentration of airborne asbestos fibers under detection limit by automated image processing and analysis using HTM method. Here we propose an improved image processing algorithm with variable parameters to enhance the accuracy of the HTM analysis. Since the variable parameters that compensate the difference of the brightness are applied to the individual images in our new image processing method, it is possible to enhance the accuracy of the automatic image analysis method for sample slides with low asbestos concentration that caused errors in binary image processing. We demonstrated that enumeration of fibers by improved image processing algorithm remarkably enhanced the accuracy of HTM analysis in comparison with PCM. The improved HTM method can be a potential alternative to conventional PCM.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.151.2-151.2
• /
• 2005

• 한국전자현미경학회:학술대회논문집
• /
• 2005.05a
• /
• pp.130-131
• /
• 2005

• 한국전자현미경학회:학술대회논문집
• /
• 2007.05a
• /
• pp.81-83
• /
• 2007

• 한국전자현미경학회:학술대회논문집
• /
• 2002.05a
• /
• pp.73-75
• /
• 2002

• Applied Microscopy
• /
• v.51
• /
• pp.1.1-1.2
• /
• 2021

We demonstrate a fabrication of an atomically controlled single-crystal heart-shaped nanostructure using a convergent electron beam in a scanning transmission electron microscope. The delicately controlled e-beam enable epitaxial crystallization of perovskite oxide LaAlO₃ grown out of the relative conductive interface (i.e. 2 dimensional electron gas) between amorphous LaAlO₃/crystalline SrTiO₃.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.35-45
• /
• 2014

Confocal Reflection Microscopy (CRM) was applied to investigate external fibrillation of different types of fibers such as Kajaani reference fiber, Whatman filter fiber, thermomechanical pulp (TMP), and recycled TMP fiber. It was confirmed that the CRM images are created from surface structures of the fiber cell wall. Confocal Laser Scanning Microscopy (CLSM) captured overall shape of the fiber, but minute details of the surface of the fiber were missed. CRM captured the minute details of the fiber surface. From the CRM and CLSM images, it was observed that the CRM images mainly appeared on the fiber surfaces. External fibrillation of the fiber occurs at the fiber surface, not inside the cell wall. Thus, it was concluded that investigation on the external fibrillation of the fiber was possible by utilizing CRM images. A direct qualtitative and quantitative method for analysis of external fibrillation of fiber was demonstrated by utilizing surface area to volume ratio, volume fraction, and roughness calculated from 3-dimensional images reconstructed from stacks of CRM images from the different fibers.