• 한국지구과학회지
• /
• 제30권1호
• /
• pp.19-32
• /
• 2009

옥천습곡대의 서남부지역에서 분포하는 쥬라기 화강암류의 석영내에 존재하는 아문 미세균열과 유체표유물을 분석하여 이 지역에 작용한 고응력장을 해석하였다. 연구지역에서 나타나는 아문 미세균열의 방향성은 전체적으로 $N30^{\circ}W$의 방향이 가장 우세하며 $N70^{\circ}W$의 방향도 나타난다. 연구지역의 아문 미세균열 생성온도는 $380-550^{\circ}C$ 범위를 보이며, 이들 아문 미세균열은 약 166-200Ma의 기간 동안 형성되었을 것으로 추정된다. 아문 미세균열의 방향성을 통한 고응력장의 작용 방향과 유체포유물에 의한 아문 미세균열의 형성시기를 비교하여 볼 때, 연구지역 내에서 발달하는 화강암질암체는 NNW-SSE와 WNW-ESE 방향의 최대수평주응력인 고응력장이 쥬라기 초기에서 쥬라기 중기 기간 동안 작용하였을 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.56-59
• /
• 2008

This paper presents results of a parametric study for a constitutive model (Lee et ai, 1989) for particle-reinforced composites considering weakened interfaces and crack nucleation. Eshelby's tensors for particles with imperfect interfaces (Ju and Chen, 1994) and microcracks (Sun and Ju, 2004) are incorporated into a micromechanical formulation. A parametric study for the microcrack nucleation parameter ${\phi}_{{\upsilon}0}$ and ${\epsilon}^{th}$ is conducted to investigate the sensitivity of the parameter to the constitutive model.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.106-113
• /
• 2000

One of the recent changes in machining technology is rapid application of micro- and high precision grinding processes. A fine groove generation is necessary for the fabrication of optics, electronics and semiconductor parts. Slot grinding is very efficient for the generation of micro ordered groove with hard and brittle materials. In the process of slot grinding, chipping at the sharp edges and microcracks of the ground grooves are inevitable defects. Chipping should be reduced for the improvement of surface integrity. Mechanical contact with diamond grits causes microcracks at the grooves. This damage resides subsurface, and can be the cause of failure of the punch die. This paper deals with chipping generation at the sharp edges, surface integrity of side groove and fracture strength is related to the microcracks in the slot grinding.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.23-29
• /
• 2007

Fracture behavior of brittle solids such as rocks, ceramics and concrete is closely related to microcracking. A meso-scale analysis method using the natural element method is proposed for the analysis of material damage of brittle microcracking solids. The microcracking is assumed to occur along Voronoi edges in the Voronoi diagram generated using the nodal points as the generators. The mechanical effect of microcracks is considered by controlling the material constants in the neighborhood of the microcracks. The proposed meso analysis method is applied to the simulation of the microcracking behaviors of brittle solids subjected to uniaxial and biaxial macrostress. The obtained results are in good agreement with the results by computational damage mechanics model. The validity of the proposed method has been demonstrated by these numerical examples.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.97-103
• /
• 2006

A meso-scale analysis method using the natural element method, which is a kind of meshless method, is proposed for the analysis of material damage of brittle microcracking solids such as ceramic materials, concrete and rocks. The microcracking is assumed to occur along Voronoi edges in the Voronoi diagram generated using the nodal points as the generators. The mechanical effect of microcracks is considered by controlling the material constants in the neighborhood of the microcracks. The macro elastic moduli of anisotropic as well as isotropic solids containing a number of randomly distributed microcracks are calculated in order to demonstrate the validity of the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.716-723
• /
• 2006

A meso-scale analysis method using the natural element method is proposed for the analysis of material damage of brittle microcracking solids. The microcracking is assumed to occur along Voronoi edges in the Voronoi diagram generated using the nodal points as the generators. The mechanical effect of microcracks is considered by controlling the material constants in the neighborhood of the micorcracks. The macro elastic moduli of isotropic solids containing a number of randomly distributed microcracks are calculated considering the effect of microcrack closure to demonstrate the validity of the proposed method.

• 자원환경지질
• /
• 제30권3호
• /
• pp.231-240
• /
• 1997

The behavior of rocks and microcrack development due to fatigue stresses are investigated using cyclic loading tests and ultrasonic velocity measurements. Twenty six medium-grained granite samples from the Pochon area are selected for measurements. Ultrasonic velocities are measured for samples before fatigue test to characterize the pre-existing microcracks. Then, thirteen different cycles of loadings with 70% and 80% dynamic strength are applied to the samples. The ultrasonic velocities are measured again to compare velocities after applications of fatigue stress with those before applications of fatigue stress. The results show that most microcracks are developed along the direction parallel to the axis of loading and that the amount of microcracks increases, as loading levels and numbers of cycle increase.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.212-216
• /
• 2007

Predicting microcracking properties of the composite laminates in nonuniform stress conditions was the subject in this paper. The uniform stress field meant the stresses were independent of the width direction. The material was the 954-2A/IM7 laminates containing a central hole. Microcracks initiated at the edge of the hole and propagated into the laminate. Because the tensile stress concentration decreased with distance, the microcracks were arrested before the edge of the laminate. Because carbon fiber composites were opaque, a x-ray method was used to detect the length of the propagating microcracks. The microcracking at the near edge of the hole could be reasonably predicted by considering the local laminate stresses and the microcracking toughness measured in unnotched laminates. However, the date away from the hole did not agree with the predictions. The local microcrack density was always much higher than that predicted by the local laminate stress.

• 전자공학회논문지A
• /
• 제29A권3호
• /
• pp.79-86
• /
• 1992

The cause of excess current noise which appears some times in RuO$_2$ thick film chip resistors and the process to reduce such noise are investigated. We observed that too large thermal expansion coefficients of resistor paste and electrode metal paste can induce the mechanical stress and microcracks in the contact region of the two sintered materials. Such microcracks result in the reduction of conduction paths in the sintered electrode and this provokes the increase of the resistance value and the current noise. Such excessive current noise induced by microcracks could be reduced or even eliminated by using an enlarged overcoat patterns in the plating process or by adding an additional annealing process before plating.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.233-238
• /
• 2022

This study evaluated the fatigue limit depending on microcracks using 0.57 wt.% carbon steel with different Vickers hardness. The fatigue limit was almost constant up to a certain limit regardless of the carbon content. However, the fatigue limit decreased rapidly as the size of the crack increased. As the crack aspect ratio was smaller, the fatigue limit of the depth (point A) a lot decreased. The fatigue limit ratio of the depth decreased significantly because the crack propagation in the depth direction was fast as the crack aspect ratio became smaller. On the other hand, the fatigue limit ratio of surface cracks increased as the crack aspect ratio decreased.