• Journal of Microbiology and Biotechnology
• /
• 제29권12호
• /
• pp.1982-1992
• /
• 2019

The alkaliphilic, calcium carbonate precipitating Bacillus sp. strain AK13 can be utilized in concrete for self-repairing. A statistical experimental design was used to develop an economical medium for its mass cultivation and sporulation. Two types of screening experiment were first conducted to identify substrates that promote the growth of the AK13 strain: the first followed a one-factor-at-a-time factorial design and the second a two-level full factorial design. Based on these screening experiments, barley malt powder and mixed grain powder were identified as the substrates that most effectively promoted the growth of the AK13 strain from a range of 21 agricultural products and by-products. A quadratic statistical model was then constructed using a central composite design and the concentration of the two substrates was optimized. The estimated growth and sporulation of Bacillus sp. strain AK13 in the proposed medium were 3.08 ± 0.38 × 10⁸ and 1.25 ± 0.12 × 10⁸ CFU/ml, respectively, which meant that the proposed low-cost medium was approximately 45 times more effective than the commercial medium in terms of the number of cultivatable bacteria per unit price. The spores were then powdered via a spray-drying process to produce a spore powder with a spore count of 2.0 ± 0.7 × 10⁹ CFU/g. The AK13 spore powder was mixed with cement paste, yeast extract, calcium lactate, and water. The yeast extract and calcium lactate generated the highest CFU/ml for AK13 at a 0.4:0.4 ratio compared to 0.4:0.25 (the original ratio of the B4 medium) and 0.4:0.8. Twenty-eight days after the spores were mixed into the mortar, the number of vegetative cells and spores of the AK13 strain had reached 10⁶ CFU/g within the mortar. Cracks in the mortar under 0.29 mm were healed in 14 days. Calcium carbonate precipitation was observed on the crack surface. The mortar containing the spore powder was thus concluded to be effective in terms of healing micro-cracks.

• Journal of Astronomy and Space Sciences
• /
• 제21권4호
• /
• pp.391-398
• /
• 2004

2003년 9월 27일 과학기술위성 1호가 성공적으로 발사된 이래, 주탑재체인 원자외선분광기(Far-ultraviolet Imaging Spectrograph, FIMS)는 초기 운용 모드를 거쳐 현재까지 정상 관측을 수행하고 있다. FIMS는 전천관측을 통해 우리은하의 뜨거운 가스의 분포를 측정하고 있으며, 초신성 잔해 및 성간운의 수소 방출선, 그리고 지구 대기의 대기광 등에 대한 관측을 수행하고 있다. FIMS의 광학계 및 검출기는 지상에서 특성 평가 및 보정을 마쳤지만, 우주 발사 과정의 진동에 의한 효과, 우주 환경에의 노출 등에 의한 효과로 인해 궤도상 보정이 필수적이다. 한편, 지구 대기에는 수소 및 질소 분자 등이 태양빛을 받아 강한 방출선들을 내는데 이들은 파장 보정의 좋은 기준선들이 된다. 이 논문에서 우리는 FIMS로 대기광 방출선들을 관측하였고, 관측된 방출선을 검출기의 위치에 따라 모델 스펙트럼과 비교하여 그 차이를 구하였으며, 이것을 보정시킴으로써 FIMS의 장파장에서의 분해능 및 정확도를 향상시키는데 기여하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

• 생물환경조절학회지
• /
• 제23권4호
• /
• pp.321-328
• /
• 2014

본 연구는 감꽃의 주요 향기성분을 알아보기 위해서 감나무 수령별로 감꽃의 향기성분을 SPME를 이용하여 분석하고, 기관을 꽃과 꽃받침으로 분류하여 향기성분을 비교하였다. 감나무 수령별 감꽃의 만개율은 15년생 이상, 10-14년생, 5-9년생 순으로 수령이 오래될수록 초기 만개율이 높았다. 감나무 수령에 따른 감꽃 향기성분 분석 시 동정된 주요 향기 성분은 a-pinene, butene, caryophyllene, cubebene, lavandulol, D-limoneneylangene, ylangene 등의 성분을 얻을 수 있었다. 대부분이 green향, fruit계, floral계의 옅은 향도 포함하고 있었다. 감꽃에 존재하는 휘발성 향기성분의 수는 5-9년생은 30종, 10-14년생은 24종, 그리고 15년생 이상에서는 32종으로 수령이 5년 미만과 15년 이상에서 많은 향기성분이 조사되었다. 감꽃을 꽃받침과 나누어 향기성분을 비교하면 단감 '부유' 품종 중 꽃의 향기 성분은 10개이고 상대적인 총 함량은 26.35%이며, 꽃받침은 향기 성분은 14개이고 상대적인 총 함량은 46.28%로 꽃에 비해서 더 다양한 향기성분이 존재하는 것으로 조사되었다. 반면 떫은감 '둥시' 품종은 꽃에서는 6개의 향기성분이 17.58%, 꽃받침에서는 9개의 향기 성분이 50.27%로, '부유' 품종에 좀더 다양한 향기성분이 존재하였다. 본 연구는 감꽃 향기를 이용하고자 하는 향기산업에 기초자료를 제공하는데 기여할 것이다.

• Composites Research
• /
• 제24권1호
• /
• pp.45-50
• /
• 2011

자체-감지능 있는 다기능성 나노복합소재를 위해, 투명하고 전도성 있는 카본나노튜브 (CNT)로 코팅된 폴리에틸렌 테레프탈레이트(PET)를 함침 방법으로 제조하였다. CNT 코팅의 전기적 광학적 특정의 변화는 함침 횟수와 CNT용액의 농도에 주로 의존하였다. 결과적으로, CNT 코팅의 표면저항과 투과도는 제조공정의 변수들에 따라 예민하게 조절되었다. CNT 코팅의 표면저항은 4점법과 이중 배열법에 의해 측정되었으며, 광학적 투과도는 UV 스펙트럼을 사용하여 평가하였다. CNT 코팅의 표면특성을 측정한 정적 및 동적 접촉각은 상호 일치함을 보여주었다. 함침 코팅수가 증가함에 따라, CNT코팅한 PET의 표면저항은 현저하게 저하했으나, 투명도는 CNT 네트워크의 특성으로 거의 감소하지 않았다. CNT와 인듐틴옥사이드 (ITO)의 계면 및 전기적 특성들은 피로 시험을 통하여 비교하였다. CNT는 2000회 반복 후에도 표면저항의 변화가 없는 반면에, ITO는 1000회 반복까지 표면저항의 급격한 증가를 보여주었다가 안정화하였다. 이는 형상비가 큰 CNT는 전기 접촉점을 계속 유지하는 반면에, 취성이 있는 ITO는 미세 균열이 발생하여 전지 접촉점을 많이 상실하기 때문이다.

• Composites Research
• /
• 제29권6호
• /
• pp.408-413
• /
• 2016

흔히 사용되는 고분자는 다양한 형태로 제조되고 있다. 더 나아가, 나일론, 아라미드와 같은 연속적인 고분자 섬유가 최근에 제조되고 있다. 이번 실험에서 에폭시를 이용하여 고분자 섬유를 제조하였다. 비스페놀-A 타입의 에폭시가 사용되었고, 아민계 및 산 무수물계 경화제가 사용되었다. 에폭시 형상을 유지하기 위해 단계적 승온방식을 이용하여 에폭시 섬유를 경화했다. 계면접착력을 확인하기 위하여 두 섬유에 대한 상대적인 표면에너지를 수정된 정적 접촉각 방식으로 확인하였다. 인장실험을 통하여 기계적인 실험을 실시하였다. 인장실험 후에 파단형태가 경화제에 따라 달라지는 것을 확인하였다. 아민계 경화제를 사용한 에폭시 섬유의 경우 인장강도가 183 MPa로 70 MPa인 산 무수물계 경화제를 사용한 에폭시를 사용한 에폭시 섬유보다 더 좋은 것을 확인하였다.

• Molecules and Cells
• /
• 제37권12호
• /
• pp.873-880
• /
• 2014

In our previous study, miRNA-183, a miRNA in the miR-96-182-183 cluster, was significantly over-expressed in esophageal squamous cell carcinoma (ESCC). In the present study, we explored the oncogenic roles of miR-183 in ESCC by gain and loss of function analysis in an esophageal cancer cell line (EC9706). Genome-wide mRNA micro-array was applied to determine the genes that were regulated directly or indirectly by miR-183. 3'UTR luciferase reporter assay, RT-PCR, and Western blot were conducted to verify the target gene of miR-183. Cell culture results showed that miR-183 inhibited apoptosis (p < 0.05), enhanced cell proliferation (p < 0.05), and accelerated G1/S transition (p < 0.05). Moreover, the inhibitory effect of miR-183 on apoptosis was rescued when miR-183 was suppressed via miR-183 inhibitor (p < 0.05). Western blot analysis showed that the expression of programmed cell death 4 (PDCD4), which was predicted as the target gene of miR-183 by microarray profiling and bioinformatics predictions, decreased when miR-183 was over-expressed. The 3'UTR luciferase reporter assay confirmed that miR-183 directly regulated PDCD4 by binding to sequences in the 3'UTR of PDCD4. Pearson correlation analysis further confirmed the significant negative correlation between miR-183 and PDCD4 in both cell lines and in ESCC patients. Our data suggest that miR-183 might play an oncogenic role in ESCC by regulating PDCD4 expression.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권18호
• /
• pp.7575-7581
• /
• 2014

MicroRNAs (miRNAs) play an essential role in the development and progression of nasopharyngeal carcinomas (NPC). Despite advances in the field of cancer molecular biology and biomarker discovery, the development of clinically validated biomarkers for primary NPC has remained elusive. In this study, we investigated the expression and clinical significance of miRNAs as novel primary NPC diagnostic biomarkers. We used an array containing 2, 500 miRNAs to identify 22 significant miRNAs, and these candidate miRNAs were validated using 67 fresh NPC and 25 normal control tissues via quantitative real-time PCR (qRT-PCR). Expression and correlation analyses were performed with various statistical approaches, in addition to logistic regression and receiver operating characteristic curve analyses to evaluate diagnostic efficacy. qRT-PCR revealed five differentially expressed miRNAs (miR-93-5p, miR-135b-5p, miR-205-5p and miR-183-5p) in NPC tissue samples relative to control samples (p<0.05), with miR-135b-5p and miR-205-5p being of significant diagnostic value (p<0.01). Moreover, comparison of NPC patient clinicopathologic data revealed a negative correlation between miR-93-5p and miR-183-5p expression levels and lymph node status (p<0.05). These findings display an altered expression of many miRNAs in NPC tissues, thus providing information pertinent to pathophysiological and diagnostic research. Ultimately, miR-135b-5p and miR-205-5p may be implicated as novel NPC candidate biomarkers, while miR-93-5p, miR-650 and miR-183-5p may find application as relevant clinical pathology and diagnostic candidate biomarkers.

• Tribology and Lubricants
• /
• 제34권3호
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권2호
• /
• pp.243-249
• /
• 2001

Thirty six barrows with an initial body weight of 28 kg were used to determine the effect of two dietary Se sources and a wide range of Se levels encompassing 0.3, 1.0, 3.0, 5.0, 7.0, and 10.0 mg/kg Se. The organic Se form was a Se-enriched yeast product, whereas the inorganic Se source was sodium selenite. The experiment was a $2{\times}6$ RCB design conducted in three replicates. Each barrow was placed in an individual metabolism crate and provided their dietary treatment and water on an ad libitum basis for a minimum 2 wk period, whereupon feed intake was adjusted to a constant intake within replicate at approximately 90% of intake for a 4 d adjustment period. Urine and feces were subsequently collected for a 7 d period and analyzed for Se and minerals. The results demonstrated that urinary Se was approximately 25% higher when pigs were fed sodium selenite (p<0.01), whereas fecal Se was lower by 25% (p<0.01). Se retention tended to be higher when organic Se was provided (p>0.15). Urinary Se increased as dietary Se level increased for both Se sources but increased more and at a high rate when sodium selenite was fed resulting in an interaction response (p<0.01). Fecal Se increased linearly as the dietary level of both Se sources increased, but the fecal Se from organic Se increased at a faster rate resulting in an interaction response (p<0.01). Se retention increased linearly (p<0.01) as dietary Se increased for both Se sources. The apparent digestibility of Se increased by Se level when pigs were fed sodium selenite, but not when the organic Se source was provided resulting in an interaction response (p<0.05). Retention of consumed Ca, Zn increased when pigs were fed organic Se (p<0.05) whereas P and Na retention were higher when the inorganic Se was provided. Mineral retention was not affected by dietary Se level except P. These results suggest that Se excretion by urine was the main route of excretion when pigs were fed sodium selenite but the fecal route when Se-enriched yeast was provided. The excretion of Fe, Zn, Mn, and Cu via urine and feces was not affected by high dietary Se level or dietary Se sources.