• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.160-165
• /
• 2016

AISI 4140 steel is widely used in various mechanical components owing to its superior mechanical properties. Surface hardening techniques are often used to further improve the properties, particularly for applications with moving components. The aim of this research is to understand the effect of heat treatment process on surface properties and tribological characteristics of AISI 4140 steel. In this work, we prepare two different AISI 4140 steel specimens- one cooled by air and one by oil- and determine surface properties such as surface topography and roughness using a confocal microscope. We also observe the cross-sections of the specimens using a scanning electron microscope to understand the difference in the material structure. In addition, we assess the hardness with respect to the distance from the surface using a micro-Vickers hardness tester. After characterizing the surfaces of the specimens, we investigate the wear characteristics of the specimens under hydrodynamic lubrication. The results show the presence of grooves on the surface of the oil-cooled specimens. It is likely that such grooves are formed during the cooling process using the oil. However, we observe no other significant differences in the surface properties of the specimens. The wear test results show the occurrence of severe wear on the oil-cooled specimens, which may be due to the groove formed on the surface. The results of this work may be helpful to improve surface properties using surface hardening techniques from a tribological perspective.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.277-288
• /
• 2012

Estuary is unique habitat ground under substantial changes of water quality, river side, bed material, and micro topography. Construction of SinGok underwater weir with excessive dredging for downstream of weir has changed hydraulic conditions of Han River. This study investigates spatial changes of estuary and expansion process of vegetation on sandbar for JangHang estuary in Han River through analysis of physical and ecological characteristics. As a result of investigation, we found that area of sandbar in JangHang estuary is expanded six times compared between 1985 and 2006, and area of Phragmites australis is gradually decreased while area of Salix subfragilis Anderson. is increased. Also the analysis result of soil layer shows that the Jang-Hang wetlands are created by effect from river, and woody plants are settled from middle part of wetlands, then spread to upper and lower part of wetlands.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.275-275
• /
• 2013

Osteoblast is one of cells related with osseointegration and many research have conducted the adhesion of osteoblast onto the surface of implant. In the osseointegration, biocompatibility of the implant and cell adhesion to the surface are important factors. The researches related to cell adhesion have a direction from micro-scaled surface roughness to nano-scaled surface roughness with advancing nanotechnology. A cell reacts and sense to stimuli from extracellular matrix (ECM) and topography of the ECM [1]. Thus, for better osseointegration, we should provide an environment similar to ECM. In this study, we synthesize TiO2 nanowires using hydrothermal reaction because TiO2 provides inertness to titanium on its surface and enables it used as an implant material for the orthopedic treatment such as fixation of the bone fracture [2]. Ti substrate is immersed into NaOH aqueous solution. The solution are heated at $140{\sim}200^{\circ}C$ for various time (10~720 minutes). After heat treatment, we take out the sample and immerse it into HCl aqueous solution for 1 hour. The acid treated sample is heated again at $500^{\circ}C$ for 3 hours [3]. Then, we culture osteoblast on the TiO2 nanowires. For investigating cell adhesion onto nanostructured surface, we conduct several tests such as MTT assay, ALP (Alkaline phosphatase) activity assay, measuring calcium expression, and so on. These preliminary results of the cell culture on the nanowires are foundation for investigating cell-material interaction especially with nanostructure interaction.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.390-407
• /
• 2020

This study was carried out to evaluate the restoration effect in the restored Yangjae stream and to draw up an adaptive management plan based on the results. As the result of evaluation on the restoration effect, the restored Yangjae stream was evaluated with low naturalness in both terms of the morphology of the stream and the composition and spatial distribution of vegetation. The diverse functional groups were introduced in the vegetation restoration, but the flooding regime, which is significant in the spatial distribution of riparian vegetation, were not correctly reflected. Exotic species or species that were not ecologically suitable for the location were introduced on the embankment and thus a measure to improve those problems is required. As the ecological principle was not reflected in the restoration plan, the stream was constructed as the double terrace structure. Therefore, the width of the waterway was narrowed further, and the waterfront was not designed to accommodate changes from flooding disturbance, making the micro-topography of the stream simpler and the naturalness lower. The adaptive management plan was prepared to improve those problems, and a plan for creating an ecological network was recommended to enhance the restoration effect.

• Atmosphere
• /
• v.33 no.4
• /
• pp.413-422
• /
• 2023

Urban Air Mobility (UAM) is promising, sustainable and efficient air transportation in a metropolitan area. Korean government has recently announced operation demonstration plans as a step toward commercialization of UAM. However, there is lack of understanding on the potential impact of weather on UAM operation. We collected weather observations from Gimpo International Airport and 5 automatic weather stations (AWS) along UAM corridor of the Han-River to assess weather barriers such as low visibility, wind gust and wind shear. The results show the frequency of low visibility near the corridor fluctuated significantly from year to year depending on the concentration of fine particulate matter (PM_2.5) in Seoul. The frequency of high wind speed-shift calculated using 1-minute wind observations was increased not only during the spring season (March, April, and May) but also the beginning of rainy season (Jun). In addition, a chance of high wind shear from 1-minute wind observations varied by the stations, suggesting that the condition is largely affected by topography including a river and high-rise buildings. These basic weather properties suggest that there are substantial weather barriers to UAM operations along the Han-River Corridor, while they cannot properly surveil micro-scale weather conditions in detail such as wind gust and wind shear over the corridor. Thus, this study suggests that potential barriers related to adverse weather need to be evaluated, building high-density weather observations infrastructure prior to UAM demonstration and commercialization.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.24-30
• /
• 2010

This study utilises repeated numerical tests to understand the effects of variable near-surface conditions on time-lapse seismic surveys. The numerical tests were aimed at reproducing the significant scattering observed in field experiments conducted at the Naylor site in the Otway Basin for the purpose of $CO_2$ sequestration. In particular, the variation of elastic properties of both the top soil and the deeper rugose clay/limestone interface as a function of varying water saturation were investigated. Such tests simulate the measurements conducted in dry and wet seasons and to evaluate the contribution of these seasonal variations to seismic measurements in terms of non-repeatability. Full elastic pre-stack modelling experiments were carried out to quantify these effects and evaluate their individual contributions. The results show that the relatively simple scattering effects of the corrugated near-surface clay/limestone interface can have a profound effect on time-lapse surveys. The experiments also show that the changes in top soil saturation could potentially affect seismic signature even more than the corrugated deeper surface. Overall agreement between numerically predicted and in situ measured normalised root-mean-square (NRMS) differences between repeated (time-lapse) 2D seismic surveys warrant further investigation. Future field studies will include in situ measurements of the elastic properties of the weathered zone through the use of 'micro Vertical Seismic Profiling (VSP)' arrays and very dense refraction surveys. The results of this work may impact on other areas not associated with $CO_2$ sequestration, such as imaging oil production over areas where producing fields suffer from a karstic topography, such as in the Middle East and Australia.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.686-694
• /
• 2019

This study was carried out to identify the long-term changes to beech forest due to climate change in Ulleung-do. To study the traits of the stand structure of beech forest with micro-topography, we investigated the distribution of the basal area, important values, and indicated species in a small ridge between Albong basin and Seongin-bong peak, and 1-ha stands (20 m × 20 m, 25 sites) dominated beech species including on the upper slope and valley parts. The result showed that the indicator species characterizing the vegetation communities were Tsuga sieboldii, Rhododendron brachycarpum, and Mitchella undulata in the small ridge and Celtis jessoensis, Dryopteris crassirhizoma, and Ulmus laciniata in the valley part. Moreover, the individuals with the total DBH < 10 cm were more predominant in the small ridge and upper slope than in the valley part, the individuals with DBH = 10-25 cm were predominant in the small slope, and individuals with DBH = 25-45 cm and DBH > 45 cm were predominant in the upper slope. The reason for the predominant distribution of beech stand with DBH<10 cm in all terrains is suggested to be germination by nutritional propagation rather than secondary succession caused by artificial disturbances and seed propagation.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.1-13
• /
• 2013

Padori beach is one of the representative composite mixed beach in Korea and shows divert geomorphic landscape change. It belongs to the Taean National Park. The purpose of this study is to clarify movement mechanism of sediments from sediment distribution of Padori beach associated with morphology. In addition, it is to explain morphological landscape change under different wave and tide condition in the composite mixed beach consisting of a dissipative low tide terrace and a reflective beach face with a high tide range of 5 to 7m. The results of this study are: First, the mean grain size of sediments becomes smaller from the south of the beach, where there is a wide wave-cut platform, to the north because gravels are supplied from the wave-cut platform as well as sea-cliff in the south of the beach. A sedimentation pattern of the sandy gravel on the beach face and gravel on the berm, and gradation phenomena of grain size on cross-shore and alongshore direction in the beach can be explained with a pattern of sediment movement, overpassing, in the composite mixed beach. Second, micro-topography on beach face and berm were changed depending on effects of wave height and tide. As a result, in low-wave energy environments, a berm is developed in large size, and beach cusps are formed on the upper beach face, while in high-wave energy environments, a berm is built up in relatively small size, and mixture of sediments occur on the upper beach face.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.22-37
• /
• 2018

Unmanned aerial vehicles (UAV) have attracted considerable attention both at home and abroad. The UAV is equipped with a camera that shoots images, which is advantageous for access to areas where archaeological investigations are not possible. Moreover, it is possible to acquire three-dimensional spatial image information by modeling the terrain through aerial photographing, and it is possible to specify the interpretation of the terrain of the survey area. In addition, if we understand the change of the terrain through comparison with past aerial photographs, it will be very helpful to grasp the existence of the ruins. The terrain modeling for searching these remains can be divided into two parts. First, we acquire the aerial photographs of the current terrain using the drone. Then, using image registration and post-processing, we complete the image-joining and terrain-modeling using past aerial photographs. The completed modeled terrain can be used to derive several analytical results. In the present terrain modeling, terrain analysis such as DSM, DTM, and altitude analysis can be performed to roughly grasp the characteristics of the change in the form, quality, and micro-topography. Past terrain modeling of aerial photographs allows us to understand the shape of landforms and micro-topography in wetlands. When verified with actual findings and overlapping data on the modelling of each terrain, it is believed that changes in hill shapes and buried Microform can be identified as helpful when used in low-flying applications. Thus, modeling data using aerial photographs is useful for identifying the reasons for the inability to carry out archaeological surveys, the existence of terrain and ruins in a wide area, and to discuss the preservation process of the ruins. Furthermore, it is possible to provide various themes, such as cadastral maps and land use maps, through comparison of past and present topographical data. However, it is certain that it will function as a new investigation methodology for the exploration of ruins in order to discover archaeological cultural properties.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.427-445
• /
• 2007

To improve osseointegration at the boneto-implant interface, several studies have been carried out to modify titanium surface. Variations in surface texture or microtopography may affect the cellular response to an implant. Osteoblast-like cells attach more readily to a rougher titanium surface, and synthesis of extracellular matrix and subsequent mineralization were found to be enhanced on rough or porous coated titanium. However, regarding the effect of roughened surface by physical and mechanical methods, most studies carried out on the reactions of cells to micrometric topography, little work has been performed on the reaction of cells to nanotopography. The purpose of this study was to examme the response of osteoblast-like cell cultured on blasted surfaces and alkali treated surfaces, and to evaluate the influence of surface texture or submicro-scaled surface topography on the cell attachment, cell proliferation and the gene expression of osteoblastic phenotype using ROS 17/2.8 cell lines. In scanning electron micrographs, the blasted, alkali treated and machined surfaces demonstrated microscopic differences in the surface topography. The specimens of alkali treatment had a submicro-scaled porous sur-face with pore size about 200 nm. The blasted surfaces showed irregularities in morphology with small(<10 ${\mu}m$) depression and indentation among flatter-appearing areas of various sizes. Based on profilometry, the blasted surfaces was significantly rougher than the machined and the alkali treated surfaces (p$TiO_2$) were observed on alkali treated surfaces, whereas not observed on machined and blasted surfaces. The attachment morphology of cells according to time was observed by the scanning electron microscope. After 1 hour incubation, the cells were in the process of adhesion and spreading on the prepared surfaces. After 3 hours, the cells on all prepared surfaces were further spreaded and flattened, however on the blasted and alkali treated surfaces, the cells exhibited slightly irregular shapes and some gaps or spaces were seen. After 24 hours incubation, most cells of the all groups had a flattened and polygonal shape, but the cells were more spreaded on the machined surfaces than the blasted and alkali treated surfaces. The MTT assay indicated the increase on machined, alkali treated and blasted surfaces according to time, and the alkali treated and blasted surfaces showed significantly increased in optical density comparing with machined surfaces at 1 day (p<0.01). Gene expression study showed that mRNA expression level of ${\alpha}\;1(I)$ collagen, alkaline phosphatase and osteopontin of the osteoblast-like cells showed a tendency to be higher on blasted and alkali treated surfaces than on the machined surfaces, although no siginificant difference in the mRNA expression level of ${\alpha}\;1(I)$ collagen, alkaline phosphatase and osteopontin was observed among all groups. In conclusion, we suggest that submicroscaled surfaces on osteoblast-like cell response do not over-ride the one of the surface with micro-scaled topography produced by blasting method, although the microscaled and submicro-scaled surfaces can accelerate osteogenic cell attachment and function compared with the machined surfaces.