• 전자공학회논문지
• /
• 제50권5호
• /
• pp.183-190
• /
• 2013

본 논문에서는 불균일한 표면을 갖는 다결정형 솔라셀에서의 마이크로 크랙 검출을 위한 개선된 비등방 확산 모델 기반의 불량 검출 기법에 대해서 다룬다. 산업용 카메라를 이용하여 획득한 영상에서 CCD 센서의 특성으로 인하여 대각선 방향으로 발생한 마이크로 크랙의 밝기가 일정하지 않게 표현되는 경우가 발생한다. 이와 같은 특징으로 인하여 기존의 비등방성 확산 모델 기반의 마이크로 크랙 검출 알고리즘에서 충분한 반복확산이 이뤄지지 않을 경우, 대각선 방향으로 발생한 마이크로 크랙을 불연속적으로 검출하는 단점을 가지고 있다. 그러나 확산 횟수가 증가할수록 전체 알고리즘 수행 시간이 증가하며, 실제 마이크로 크랙보다 두껍게 검출하는 경향이 있다. 이러한 단점을 개선하기 위하여 기존의 동서남북 방향 기울기를 이용하는 비등방 확산 모델에 확장된 대각선 방향의 기울기를 추가로 적용하였다. 제안된 방법은 십자방향의 기울기와 확장된 기울기를 비교하고, 보다 큰 값을 확산계수 함수에 적용하는 방법이다. 이는 대각선 방향으로 발생된 마이크로 크랙의 정보를 반영하기 위한 것이다. Tsai et al.의 방법과 Ko and Rheem의 방법과 비교실험 한 결과, 본 논문에서 제안된 알고리즘이 기존에 제안된 알고리즘에 비하여 적은 반복횟수에서 마이크로 크랙을 우수하게 검출하는 것을 확인했다. 또한 기존 알고리즘에 비하여 실제 마이크로 크랙과 유사한 두께로 검출하는 것을 확인했다.

• 대한두개안면성형외과학회지
• /
• 제10권1호
• /
• pp.23-28
• /
• 2009

Purpose: Blow out fracture can present tenderness, swelling, enophthalmos, extraoccular muscle limitation, paresthesia, diplopia according to severity of injury, so reconstruction of blow out fracture is important. Orbital soft tissue should be in orbit and defected orbital wall should be corrected by autologus tissue or alloplastic implants. Every implants have their merits and faults, every implants are used various. This study was designed to compare the sequelae of blow-out fracture repair using the alloplastic implants: micro-titanium mesh(Micro Dynamic titanium $mesh^{(R)}$, Leibinger, Germany), porous polyethylene ($Medpor^{(R)}$, Porex, USA), absorbable mesh plate(Biosorb $FX^{(R)}$ . Bionx Implants Ltd, Finland). Methods: Between January 2006 and April 2008, 52 patients were included in a retrospective study analysing the outcome of corrected inferior orbital wall fracture with various kind of implants. Implants were inserted through subciliary incision. Twenty patients were operated with micro-titanium mesh, fourteen patients with porous polyethylene and eighteen patients with absorbable mesh plate. In comparative category, enophthalmos, diplopia, range of motion of extraoccular muscle, inferior orbital nerve injury were more on frequently statistically in patients. Results: Fourteen of 18 patients underwent surgical repair to improve diplopia, 11 of 17 patients to improve parasthesia, 11 of 15 patients to improve enophthalmos, 8 of 9 patients to improve extraoccular muscle limitation. Duration of follow-up time ranged from 6 months to 12 months(mean, 7.4 months). There was no statistic difference of sequelae between micro titanium mesh and porous polyethylene and absorbable mesh plate in blowout fracture, inferior wall. Conclusion: There is no difference of sequelae between micro-titanium mesh, porous polyethylene and absorbable mesh plate in blow-out fracture, inferior wall. The other factors such as defect size, location, surgeon's technique, may influence the outcome of blow-out fracture repair.

• Journal of Periodontal and Implant Science
• /
• 제50권1호
• /
• pp.14-27
• /
• 2020

Purpose: To overcome several drawbacks of chemically-crosslinked collagen membranes, modification processes such as ultraviolet (UV) crosslinking and the addition of biphasic calcium phosphate (BCP) to collagen membranes have been introduced. This study evaluated the efficacy and biocompatibility of BCP-supplemented UV-crosslinked collagen membrane for guided bone regeneration (GBR) in a rabbit calvarial model. Methods: Four circular bone defects (diameter, 8 mm) were created in the calvarium of 10 rabbits. Each defect was randomly allocated to one of the following groups: 1) the sham control group (spontaneous healing); 2) the M group (defect coverage with a BCP-supplemented UV-crosslinked collagen membrane and no graft material); 3) the BG (defects filled with BCP particles without membrane coverage); and 4) the BG+M group (defects filled with BCP particles and covered with a BCP-supplemented UV-crosslinked collagen membrane in a conventional GBR procedure). At 2 and 8 weeks, rabbits were sacrificed, and experimental defects were investigated histologically and by micro-computed tomography (micro-CT). Results: In both micro-CT and histometric analyses, the BG and BG+M groups at both 2 and 8 weeks showed significantly higher new bone formation than the control group. On micro-CT, the new bone volume of the BG+M group (48.39±5.47 ㎣) was larger than that of the BG group (38.71±2.24 ㎣, P=0.032) at 8 weeks. Histologically, greater new bone area was observed in the BG+M group than in the BG or M groups. BCP-supplemented UV-crosslinked collagen membrane did not cause an abnormal cellular reaction and was stable until 8 weeks. Conclusions: Enhanced new bone formation in GBR can be achieved by simultaneously using bone graft material and a BCP-supplemented UV-crosslinked collagen membrane, which showed high biocompatibility and resistance to degradation, making it a biocompatible alternative to chemically-crosslinked collagen membranes.

• 한국결정성장학회지
• /
• 제24권6호
• /
• pp.246-251
• /
• 2014

최근 태양전지의 효율을 증가시키기 위한 연구가 많이 이루어지고 있으며, 특히 단결정 실리콘 웨이퍼의 경우 높은 효율을 낼 수 있는 소재로써 고효율 태양전지연구에 많이 이용되고 있다. 본 연구에서는 단결정으로 Czochralski(Cz)-Si 성장 시 산소농도를 다르게 하여 산소석출결함의 변화와 그에 따른 셀효율과의 관계를 비교하였다. 산소불순물은 Cz법으로 성장시킨 실리콘의 주된 불순물이다. 산소불순물 존재 시 태양전지 공정에서 산소석출결함이 생성되며 발생된 산소석출결함은 셀효율에 악영향을 미치게 된다. 그러므로 고효율 태양전지를 위한 웨이퍼를 생산하기 위한 산소석출결함 밀도와 셀효율의 상관성을 연구하였다. 또한 산소농도에 따른 산소석출결함을 분석하여 산소석출결함이 발생되지 않는 잉곳 내 산소농도 범위를 연구하여 14.5 ppma 이하에서 Bulk Micro Defect(BMD)가 발생하지 않음을 확인하였다.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.128-133
• /
• 2011

In this study, the steel material for shipbuilding(LR-A class) was used, and FCAW was taken advantage of 3G attitude and they are welded by different welding ways. As a result of analyzing wave with welding monitoring system, the stable values are obtained which are the first floor(electronic current 164~182 A, voltage 24 V), the second floor(electronic current 174~190 A, voltage 22~25 V), the third floor(electronic current 158~188 A, voltage 22~25 V), and fourth floor(electronic current 172~184 A, voltage 22~25 V), at this time, the stable wave standard deviation and changing coefficient could be obtained. When the welding testing through nondestructive inspection was analyzed know defect of welding, there was no defect of welding in A, D, E, but some porosities in B, and slag conclusion near the surface in C, because the length of arc was not accurate, and the electronic current and voltage was not stable. After observing the change of heat affect zone through micro testing, each organization of floor formed as Grain Refinement, so welding part was fine, the distance of heat affect zone is getting wider up to change the values of the electronic current and voltage. As a result of degree of hardness testing, the hardness orders were the heat affect zone(HAZ), Welding Zone(WZ), and Base Metal(BM). When the distribution of degree of hardness is observed. B is the highest degree of hardness The reason why heat effect zone is higher than welding zone and base metal, welding zone is boiled over melting point($1539^{\circ}C$) and it starts to melt after the result of analysis through metal microscope, so we can know that delicate tissue is created at the welding zone. Therefore, in order to get the optimal conditions of the welding, the proper current of the welding and voltage is needed. Furthermore the precise work of welding is required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권6호
• /
• pp.461-468
• /
• 2009

Purpose: Platelet derived growth factor(PDGF)-BB and bone morphogenetic protein(BMP)-2 are well-known representative growth factors. The purposes of this study were to investigate the effect of rhPDGFBB and rhBMP-2 on osseointegration of titanium implants at periimplant bone defects grafted with hydroxyapatite and to evaluate the feasibility of imaging bone structures around screw-type titanium implant with micro-CT. Materials and Methods: The first molar and all premolars in the mandible region of four beagle dogs were extracted. Following a healing period of 4 months, three $8{\times}8{\times}6mm$-sized bony defects were formed and screw-type titanium implants were placed with hydroxyapatite(HA) block and growth factors; Control group, PDGF group and BMP group. Two months post-implantation, the mandible was harvested. Bone volume(BV), bone-to-implant contact(BIC) and bone mineral density(BMD) were analyzed with micro-CT and histology. Results: According to micro-CT analysis, BV and BMD measures of PDGF and BMP group were significantly higher than control group(BV; PDGF group: $p{\fallingdotseq}0.011$, BMP group: $p{\fallingdotseq}0.006$/BMD; PDGF group: $p{\fallingdotseq}0.020$, BMP group: $p{\fallingdotseq}0.011$) and BIC measures of BMP group were significantly higher than PDGF group($p{\fallingdotseq}0.015$). In histologic evaluation, BIC measures of BMP group was significantly higher than PDGF group($p{\fallingdotseq}0.048$). The values of BV in histologic sections were higher than in micro-CT images and the values of BIC in micro-CT images were higher than in histologic sections. Conclusion: The findings of this experimental study indicates that the use of rhPDGF-BB and rhBMP-2 can increase new bone formation in a large bony defect around titanium implant, and rhBMP-2 is more effective than rhPDGF-BB. Micro-CT can be considered useful for assessment as a rapid and nondestructive method for 3-dimensional measurement of bone healing around implants. Further study is necessary, however, to remove metal artifacts around titanium implant and to standardize the method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.104-111
• /
• 2009

This paper shows the behaviors of macro- and micro-structures and mechanical properties for specimen's welding region welded by FSW. according to welding conditions with 5mm thickness aluminum 5083O alloy plate. It apparently results in defect-free weld zone in case traverse speed was changed to 32 mm/min under conditions of anti-clockwise direction and tool rotation speed such as 800 and 1250 rpm with tool's pin diameter of 5 ${\Phi}mm$ and shoulder diameter of 20 ${\Phi}mm$, pin length of 4.5 mm and tilting angle of $2^{\circ}$. The ultimate stress of ${\sigma}_T=331$ MPa and the yield point of 147 MPa are obtained at the condition of the travel speed of 32 mm/min with the tool rotation speed of 1250 rpm. There is neither voids nor cracks on bended surface of $180^{\circ}$ after bending test. The improvement of toughness after impact test was found. The lower rotating and traverse speed became, the higher were yield point, maximum stress and elongation(%) with the stresses and the elongation(%) versus the traverse speed diagram. Vickers hardness for cross section of welding zone were also presented. The typical macro-structures such as dynamically recrystallized zone, thermo-mechanically affected zone and heat affected zone and the micro-structures of the transverse cross-section were also showed. However, the author found out that the region of 6mm far away from shoulder circumference was affected by friction heat comprehensively, that is, hardness softened and that part of micro-structures were re-solid-solution or recrystallized, the author also knew that there is no mechanically deformation on heat affected zone but there are the flow of plastic deformation of $45^{\circ}$ direction on thermo-mechanically affected zone and the segregation of Al-Mg on nugget. The solid solution wt(%) of parent material as compared against of friction stir welded zone was comprehensively changed.

• Restorative Dentistry and Endodontics
• /
• 제47권4호
• /
• pp.35.1-35.9
• /
• 2022

Although the success rates of microsurgery and micro-resurgery are very high, the influence of a recurrent perforation combined with radicular cyst remains unclear. A 21-year-old white female patient had a history of root perforation in a previously treated right maxillary lateral incisor. Analysis using cone-beam computed tomography (CBCT) revealed an extensive and well-defined periapical radiolucency, involving the buccal and palatal bone plate. The perforation was sealed with bioceramic material (Biodentine) in the pre-surgical phase. In the surgical phase, guided tissue regeneration (GTR) was performed by combining xenograft (lyophilized bovine bone) and autologous platelet-rich fibrin applied to the bone defect. The root-end preparation was done using an ultrasonic tip. The retrograde filling was performed using a bioceramic material (Biodentine). Histopathological analysis confirmed a radicular cyst. The patient returned to her referring practitioner to continue the restorative procedures. CBCT analysis after 1-year recall revealed another perforation in the same place as the first intervention, ultimately treated by micro-resurgery using the same protocol with GTR, and a bioceramic material (MTA Angelus). The 2-year recall showed healing and bone neoformation. In conclusion, endodontic micro-resurgery with GTR showed long-term favorable results when a radicular cyst and a recurrent perforation compromised the success.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1888-1890
• /
• 1999

In this work, we have systematically studied the effects of filtration and the defect trend as a function of polished wafer count using various filters in Inter-Metal Dielectric(IMD) CMP. The filter Installation in CMP polisher makes defect reduced after IMD CMP. As a result of formation micro-scratches, it shows that slurry filter plays an important role in determining consumable pad lifetime. The filter lifetime is dominated by the defects. We have acknowledged slurry filter lifetime is fixed by the degree of generating defects.

• 비파괴검사학회지
• /
• 제35권3호
• /
• pp.215-220
• /
• 2015

최근 널리 사용되는 모든 비파괴검사 기술 중 적외선열화상 카메라는 점차 적용 범위를 확대하고 있다. 초음파적외선 열화상은 절대온도 0 K 이상의 모든 물체가 방출하는 적외선 에너지를 검출하여 검사자가 볼 수 있는 화상으로 이미지를 만들어 검사하는 기술에 초음파를 접목하여 결함 부위만을 검출하는 방법으로 비접촉으로 넓은 범위를 빠른 시간에 검사할 수 있는 장점이 있는 기술이다. 본 연구에서는 고유주파수를 변화할 수 있는 터패놀-D 소재의 가변초음파 가진검사 방법을 이용하여 결함 검출의 적용가능성을 연구하였다.