• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.74-82
• /
• 1999

Nowadays, the crank shaft motor vehicle has become essential as the important component. The machining precision was asked for manufacturing the shaft. They could be unstable in the quality by the conventional are welding. Both in-process quailty control and high reliability of the weld are the major concerns in applying friction wlding to the economical and qualified mass-production. No reliable nondestructive monitoring method is avaliable at present to determine the real-time evaluation of automatic production quality control for bar-to-bar friction welding of the crank shaft of O.D 24mm for motor vehicle. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 24mm shaft as well as the various welding variables, as a new approach which attempts finally to develop real-time quality monitoring system for friction welding, resulting in practical possiblility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.764-767
• /
• 2006

Ni/YSZ $(Y_2O_3-stabilized\;ZrO_2)$ composite as an electrode component for High Temperature Electrolysis (HTE) was fabricated by mechanical alloying method using Ni and YSZ powders. Characterization of the synthesized composite was investigated with various analysis tools, including XRD, SEM and PSA, and a self-supporting planar unit cell prepared with the Ni/YSZ composite was prepared to study the electrochemical reactions for the production of hydrogen. The Ni/YSZ cermet is composed of crystalline Ni and YSZ, in a sub-micro scale, and has an even distribution without aggregated particles. In addition, under an electrochemical reaction, the unit cell showed an $H_2$ evolution rate from steam of 14 Nml/min and $600mA/cm^2$ of current density at the electrode.

• 한국조명전기설비학회지:조명전기설비
• /
• 제6권2호
• /
• pp.56-61
• /
• 1992

유도 전동기의 일정자속 벡터제어에서 유도전동기의 속도를 별도의 속도검출장치가 없이, 전동기의 속도를 1차측 전압과 전류 및 전동기정수에 의하여 추정하는 방법을 제시하고 전류추종형 PWM인 버터에 의하여 구동 시스템을 구성하였다. 모든 연산 및 제어회로를 마이크로프로세서에 의하여 보다 간단하게 실현시켜 유도전동기의 가변속 구동특성을 컴퓨터 시뮬레이션과 실험에 의하여 조사하였다. 속도검출장치를 이용한 경우와 연산회로에 의하여 계산된 경우의 입력 전류파형상의 차이를 조사한 결과 미소한 리플성분을 제외하고는 잘 일치하였으며, 기동 및 가감속시의 속도추종특성도 시뮬레이션의 결과와 함게 양호하게 얻어졌다.

• 대한화장품학회지
• /
• 제19권1호
• /
• pp.127-138
• /
• 1993

고압유화 장치인 Microflridizer를 이용하여 4성분계의 emulsion을 제조하기 위한 최적조건을 알아보았다. Oil은 squalane, isopropyl myristate, PPG-15 stearyl benzoate ester를 사용하였으며, surfactant는 POE(20) sorbitan monolaurate, POE(20) sorbitan monopalmitate, POE(20) sorbitan monostearate를, cosuractant는 glycerine을 사용하여 Micro-fluidizer의 작업압력 및 순환횟수, oil의 종류 및 농도, cosurfactant의 농도에 따른 eumlsion의 상태를 비교하였다. 입자의 크기는 작업압력 및 순환횟수가 증가함에 따라 감소율이 점점 둔화되었으며 이 때의 적정압력은 1400bar 정도, 순환횟수는 4회 정도임을 알았다. 또한 cosurfactant인 glycerine의 농도가 30wt.%일 때 가장 작은 emulsion입자를 얻을 수 있었고, oil의 농도가 증가할수록 입자의 크기는 증가하는 현상을 나타내었다.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.41-49
• /
• 1997

작은 파 기울기(Ak=0.01)를 갖는 Stokes 파/평판의 경계층 및 반류에 대하여 엄밀 및 근사 자유표변 경계조건을 적용하여 Navier-Stokes 식을 수치해석하였다. 거시유동에서는 외부 흐름 압력 변화가 유선방향의 속도 성분을 가속 혹은 감속시키며 교차 유동의 방향 변화를 야기시킨다. 특히 반류는 역(逆)압력기울기 영역에서보다 순(順)압력기울기 영역에서 그 반응이 크며 정수 중에서의 값을 평균치로 하지 않고 편향되는 반류 편향 특성을 갖는다. 미시유동에서는 자유표면 경계조건이 경계층 및 근접/중간 반류영역에서 큰 영향을 미친다. 차수크기 추정은 계산 결과와 잘 일치하였으며 근사 자유표변 경계조건은 상당한 오차를 유발시킴을 알 수 있다.

• 한국산업정보학회논문지
• /
• 제20권4호
• /
• pp.103-109
• /
• 2015

본 논문은 MCU에 내장된 플레쉬 메모리의 오동작 테스트를 shmoo 테스트 기법을 사용하고, 이 기능을 내장한 롬라이트 개발에 관한 논문이다. shmoo 테스트는 다양한 입력조건에 대한 응답을 도표로 나타내고 분석하는 기법으로, 마이크로프로세서, ASIC 및 메모리와 같은 집적회로 또는 컴퓨터 시스템의 성능분석의 기법으로 사용된다. 개발된 롬라이터는 Shmoo 검사를 수행하고 Flash 32K의 쓰기를 수행하였을 때 6.4s 정도의 시간이 소요되었으며, 이는 현재 사용하고 있는 ROM Writer의 속도에 비해 약 20% 정도 향상되었다.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.994-998
• /
• 2009

Existing cooling technologies no longer provide adequate heat dissipation due to excessive heat generation caused by the growing component density on electronic devices. An ionic gas pump can be used for the thermal management of micro-electronic devices, since the size of pump can be reduced to a micrometer scale. In addition, the gas pump allows for gas flow control and generation without moving parts. This ideal property of gas pump gives rise to a variety of applications. However, all these applications require maximizing the wind velocity of gas pump. In this study a barrier discharge type gas pump, with a needle-shaped corona electrode instead of a plate-shaped corona electrode, has been investigated by focusing on the corona electrode shape on the wind velocity and wind generation yield. As a result, the enhanced wind velocity and wind generation yield of 1.76 and 3.37 times were obtained with the needle-shaped corona electrode as compared with the plate-shaped corona electrode of the proposed barrier discharge type gas pump.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.118-118
• /
• 2003

In a rolling wire probe, a key component of an inspection apparatus for PDP electrode patterns, the electric performance of it is known to be strongly dependent on the surface condition of a collet pin, a needle pin, and a wire. However, the collet and needle pins rotate very rapidly in contact with each other, which results in the degradation of the surface by the heat and friction and finally the formation of black wear marks on the surface after a several hundred hours test. Once the black wear marks appear on the surface, the electric resistance of the probe increases sharply and so the integrity of the probe is severely damaged. In this experiment, TiN coating, which has excellent electric conductances and good wear-resistance, has been applied on the surface of collect and needle pins for preventing the surface damages. In order to achieve the homogeneous coating with a good adhesion property, special coating substrate stages and jigs were designed and applied during coating. TiN has been deposited using 99.999% Titanium target by a DC reactive sputtering method. According to the components and jigs, processing parameters, such as DC power, RF bias and the flow rate ratio of Ar and N$_2$ used as reactive gases, has been controlled to obtain good TiN films. Detailed problems and solutions for applying the new substrate stages and jigs will be discussed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.196-197
• /
• 2011

Rudder, one of the most important component in the marine vessel, is now being decreased life time to serve due to cavitation erosion, vortex current, high flow speed suffer from ship speed going up dramatically. In this study, 10 kinds of thermal spray coating materials(2 of Zn alloy series, 3 of Al alloy series, 3 of Cu alloy series, 2 of STS alloy series) are chosen to apply on specimens and analyze micro structure, metallic composition, properties(porosity, oxidation) by using visual observation, XRD, EDX etc.. Additionally, to refine the characteristic of corrosion endurance for thermal spray coating layer, compared with thermal spray process and 5 kinds of heavy duty painting and AC paint (Anti-Corrosion Paint). Based on above mentioned experimental results, a priority of all coated specimens on corrosion-erosion endurances finalized and summarized there by desirable composition and process of thermal sprayed material properly.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.661-667
• /
• 2004

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (Δ$\varepsilon$＞0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC(Δ$\varepsilon$＞0) is smaller than that of the negative type (Δ$\varepsilon$＞0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature. As the increase of baking temperature, we obtain that AFM (atomic force microscope) image of rubbed PI surface using Hot-plate method has formed better solid micro-groove structure than oven method.