• Title/Summary/Keyword: micro pulp

Search Result 81, Processing Time 0.028 seconds

Effects of Polymer Coated Micro pulp on Paper Properties (고분자 코팅 처리된 마이크로 펄프가 종이 물성에 미치는 영향)

  • Son, Dong-Jin;Kim, Hak-Sang;Kim, Bong-Yong
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.42 no.1
    • /
    • pp.48-53
    • /
    • 2010
  • Commercial micro pulps(Arbocel) were coated with three kinds of polymers using spray method. These coated micro pulps were used to papermaking additives to evaluate retention, drainage and physical properties of paper. The retention and drainage were improved with addition of polymer coated micro pulp. The bulk index of paper was also increased, but tensile and tear strength were decreased slightly, probably due to weakening of internal bonding. These results showed that the use of polymer coated micro pulp was an effective method to improve retention, drainage and bulk index of paper.

Improvement of Physical Characteristics of Paper with Micro Pulp (마이크로 펄프를 이용한 종이의 물성 개선)

  • Kim, Hak-Sang;Kim, Bong-Yong
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.40 no.1
    • /
    • pp.9-14
    • /
    • 2008
  • Beating and using chemical agents are common methods to improve physical properties. But the beating is high energy consumption process and chemical agent addition may cause deteriorate waste water quality. Therefore, it is necessary to use more environment-friendly methods. In this study, micro pulp was used in the handsheet making to get improving effects of physical properties without beating treatment and chemicals. Stiffness, thickness and air permeability were increased and strength properties of paper were also improved to some extents by only the micro pulp addition.

Influence of Several Physicochemical Conditions on the Flocculation of Micro Stickies

  • Kim, Jong-Min;Lee, Hak-Lae
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.40 no.5
    • /
    • pp.20-26
    • /
    • 2008
  • Behavior of micro stickies was analyzed using model micro stickies prepared with PVAc emulsion adhesive. Flocculation of micro stickies increased with temperature. Acidic state also induced greater flocculation of micro stickies since they became more unstable under these conditions. Flocculation of micro stickies increased as calcium ion concentration increased. But the presence of calcium carbonates made micro stickies dispersed indicating that calcium carbonates cause two different effects on the behavior of micro stickies. Talc increased flocculation of micro stickies because of its hydrophobic nature. Cationic polymer increased flocculation of micro stickies. Especially cationic starch has far greater effect in flocculating sticky particles by forming bridging flocculations.

Generalized Pulp Stones of Primary Dentition in a Patient with Molar-Incisor Malformation : A Case Report (Molar-Incisor Malformation 환자의 유치열 내 전반적인 치수석 관찰의 증례 보고)

  • Lee, Dongyun;Shin, Jisun
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.47 no.3
    • /
    • pp.337-343
    • /
    • 2020
  • Molar-incisor malformation (MIM) is a new type of root anomaly reported recently. The characteristics of MIM are dysplastic root formations, constriction of pulp chambers and presence of calcified matrices at the level of cementoenamel junction in permanent first molars and primary second molars. In some cases, permanent maxillary incisors are also affected. The permanent first molars of the patient in this case report were affected with MIM. Generalized pulp stones were observed in overall primary dentition. Micro-computed tomography (micro-CT) imaging and scanning electron microscope-energy dispersive X-ray spectrometer analysis were performed on the extracted mandibular first molar and maxillary primary second molar of the patient. Micro-CT images revealed the discontinuity of enamel directly connected to an accessory canal of the root.

Quantitative Characterization of Internal Fibrillation of Pulp Fiber

  • Won, Jong-Myoung;Lee, Jae-Hun
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.39 no.1 s.119
    • /
    • pp.1-7
    • /
    • 2007
  • Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

The Effect of White Water Components on Mechanical Properties of Linerboard (라이너지 공정수의 구성 성분이 종이의 물성에 미치는 영향)

  • 윤혜정;류정용;송봉근;조미선
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.36 no.1
    • /
    • pp.9-15
    • /
    • 2004
  • Micro inorganic solids and dissolved materials contained in the white water of linerboard process was obtained by centrifugation, and their characteristics were analyzed along with their effects on the mechanical properties of linerboard. Micro inorganic materials had little influence on tensile index and ZDT of UKP sheets. They showed rather a positive effect on mechanical properties of KOCC sheets due to adsorbed polymer. Mechanical properties of KOCC sheets decreased remarkably when the concentration of dissolved materials increased especially above 4000 ppm.

Evaluation of reparative dentin formation of ProRoot MTA, Biodentine and BioAggregate using micro-CT and immunohistochemistry

  • Kim, Jia;Song, Young-Sang;Min, Kyung-San;Kim, Sun-Hun;Koh, Jeong-Tae;Lee, Bin-Na;Chang, Hoon-Sang;Hwang, In-Nam;Oh, Won-Mann;Hwang, Yun-Chan
    • Restorative Dentistry and Endodontics
    • /
    • v.41 no.1
    • /
    • pp.29-36
    • /
    • 2016
  • Objectives: The purpose of this study was to assess the ability of two new calcium silicate-based pulp-capping materials (Biodentine and BioAggregate) to induce healing in a rat pulp injury model and to compare them with mineral trioxide aggregate (MTA). Materials and Methods: Eighteen rats were anesthetized, cavities were prepared and the pulp was capped with either of ProRoot MTA, Biodentine, or BioAggregate. The specimens were scanned using a high-resolution micro-computed tomography (micro-CT) system and were prepared and evaluated histologically and immunohistochemically using dentin sialoprotein (DSP). Results: On micro-CT analysis, the ProRoot MTA and Biodentine groups showed significantly thicker hard tissue formation (p < 0.05). On H&E staining, ProRoot MTA showed complete dentin bridge formation with normal pulpal histology. In the Biodentine and BioAggregate groups, a thick, homogeneous hard tissue barrier was observed. The ProRoot MTA specimens showed strong immunopositive reaction for DSP. Conclusions: Our results suggest that calcium silicate-based pulp-capping materials induce favorable effects on reparative processes during vital pulp therapy and that both Biodentine and BioAggregate could be considered as alternatives to ProRoot MTA.

Application of White Light Interferometery Method for the Measurement of Surface Micro-structure of Paper Products and Prints (백색광 주사간섭법을 이용한 표면미세형상 측정과 그 적용)

  • Sung Yong Joo;Ryu Jeong Yong;Song Bong Keun
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.36 no.4 s.107
    • /
    • pp.33-40
    • /
    • 2004
  • A white light interferometery (WLI) method for investigating surface microstructure was introduced. Brief description of the principle of this method was provided. The surface structure of various samples, for example, a liner board paper, a pigment coated paper, a intaglio printed paper and a polymer laminated paper were tested and characterized with the WLI method. The data showed the WLI method provided very detailed information about surface topography, which were little affected by the surface condition such as color, opacity, roughness, etc. The data stitching mode of the WLI method could provide high spatial resolution over a large field-of-view, which made it possible to obtain the statistically valid results. Fast and high repeatability also made this method a promising way for investigating the surface micro-structure of paper products and prints.

High Luminescence Properties of YPV nano size phosphors by a Liquid Phase Precursor Method

  • Jo, D.S.;Dulda, A.;Masaki, T.;Yoon, D.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2009.10a
    • /
    • pp.1293-1296
    • /
    • 2009
  • The synthesis of nano-size ($Y_{0.955}Eu_{0.1}$)($P_{0.7}V_{0.45}$)$O_4$ red phosphors were conducted by using a Liquid Phase Precursor (LPP) method. In this method, cellulose pulp was used as a template showing the micro fibre structures to obtain the nano size YPV red phosphor. Aqueous solutions of raw materials were impregnated into cellulose pulp and subsequently impregnated pulp was dried and fired at $800-1200^{\circ}C$ for 1h. The effect of luminescence properties on compositions and temperatures was evaluated with photoluminescence spectrum, X-ray diffraction and FE-SEM, and TEM. High efficiency (~110%) of phosphor of size of ~500nm fired at $1150^{\circ}C$ was obtained compared with the micro size of commercial product. High efficiency behaviors of nano size phosphors were discussed in this paper.

  • PDF