• 대기
• /
• 제18권2호
• /
• pp.97-109
• /
• 2008

The aerosol characteristics in terms of 4 different cases (Asian dust, fog, clear sky and cloud) which had happened at Anmyeon Island in April 2006 were studied using various measurements such as the Micro Pulse Lidar (MPL), sunphotometer, $\beta$-ray $PM_{10}$ Analyzer, anemoscope and anemometer. In addition, synoptic charts, back trajectory analyses and satellite images were also used to help characterize the aerosol events. The aerosol optical properties were featured by the Aerosol Optical Depth (AOD) and ${\AA}ngstr\ddot{o}m$ exponent which were estimated by the sunphotometer. When Anmyeon Island was dominated by the Asian dust, the AOD was sharply increased as seven times as a yearly average of it (0.35). As compared with a yearly average of the ${\AA}ngstr\ddot{o}m$ exponent of 0.97, the ${\AA}ngstr\ddot{o}m$ exponent of a dust day was significantly low (0.099). In addition, $PM_{10}$ mass concentration showed an extremely high record. The maximum concentration reached $1790.5{\mu}gm^{-3}$ on 8 April 2006. The maximum mass concentration was shown with delay when the wind speed of $0ms^{-1}$ was observed. It was also found that a satellite image of the MODIS-RGB had a good agreement with the results of those measurements. It was shown that the MPL was able to describe effectively the vertical distribution of aerosol for all the cases. In particular, the MPL evidently captured the aerosol layer before the cloud observation. The aerosol layer was similarly described by the AOD. On a clear sky day, the AOD had not only a very low value (0.054) but also a feature of homogeneity.

• 한국가스학회지
• /
• 제19권5호
• /
• pp.75-80
• /
• 2015

나노 및 마이크로 크기의 알루미늄(Al) 분진은 매우 높은 연소열을 가지고 있어서 로켓 추진체와 폭발물 등을 제조하는 원료로 많이 사용되고 있다. 본 연구에서는 서로 다른 크기의 입자경 (70 nm, 100 nm, $6{\mu}m$, $15{\mu}m$)을 가진 알루미늄 분진을 사용하여 열분해 위험성을 실험적으로 검토하였다. 이를 위해 열중량분석장치(TGA)를 사용하여 승온속도의 변화에 따른 열분해특성을 조사하고 입경이 다른 나노 및 마이크로 크기의 Al에서의 중량개시온도(Temperature of weight gain)로부터 발화온도를 추정하였다. 승온속도가 동일한 조건에서 Al분진의 중량개시온도는 입경이 증가할수록 또한 공기중 승온속도가 증가할수록 증가하는 경향을 나타냈다. 이러한 실험결과로부터 Al분진의 열분해 위험성은 분진 입자경의 증가와 함께 감소할 것으로 추정되었다.

• Advances in concrete construction
• /
• 제11권3호
• /
• pp.207-217
• /
• 2021

This study relates to a production of Quaternary Cement Concrete (QCC) prepared by using Micro Silica (MS), Marble Dust (MD) and Rice Husk Ash (RHA), followed by an investigation towards fresh and hardened properties of blended concrete. A total of 39 mixes were cast by incorporating different percentages of MS (6%, 7% and 8%), MD (5%, 10% and 15%) and RHA (5%, 10%, 15% and 20%) as partial replacement of Ordinary Portland Cement. The workability of fresh concrete was maintained in the range of 100±25 mm by adding 0.7% of Super Plasticizer in the mix. Optimum mechanical strength was observed at combination of 8% MS+5% MD+10% RHA. Marble dust replacement from 10 to 15% and Rice husk ash replacements from 15 to 20% depicted a substantial reduction in compressive strength at all ages. Durability parameter with respect to water absorption at 28 days shows an increasing trend as the percentage of blending increases.

• 대기
• /
• 제18권4호
• /
• pp.287-297
• /
• 2008

The vertical profiles and optical properties of Asian dust are investigated using ground-based measurements from 1998 to 2002. Vertical profiles of aerosol extinction coefficient are evaluated using MPL (Micro Pulse Lidar) data. Optical parameters such as aerosol optical thickness ($\tau$), ${\AA}ngstr\ddot{o}m$ exponent ($\alpha$), single scattering albedo ($\omega$), refractive index, and volume size distribution are analyzed with sun/sky radiometer data for the same period. We can separate aerosol vertical profiles into three categories. First category named as 'Asian dust case', which aerosol extinction coefficient is larger than $0.15km^{-1}$ and dust layer exists from surface up to 3-4km. Second category named as 'Elevated aerosol case', which aerosol layer exists between 2 and 6km with 1-2.5km thickness, and extinction coefficient is smaller than $0.15km^{-1}$. Third category named as 'Clear sky case', which aerosol extinction coefficient appears smaller than $0.15km^{-1}$. and shows that diurnal variation of background aerosol in urban area. While optical parameters for first category indicate that $\tau$ and $\alpha$ are $0.63{\pm}0.14$, $0.48{\pm}0.19$, respectively. Also, aerosol volume concentration is increased for range of 1 and $4{\mu}m$, in coarse mode. Optical parameters for second category can be separated into two different types. Optical properties of first type are very close to Asian dust cases. Also, dust reports of source region and backward trajectory analyses assure that these type is much related with Asian dust event. However, optical properties of the other type are similar to those of urban aerosol. For clear sky case, $\tau$ is relatively smaller and $\alpha$ is larger compare with other cases. Each case shows distinct characteristics in aerosol optical parameters.

• 한국지구과학회지
• /
• 제41권2호
• /
• pp.111-128
• /
• 2020

본 연구에서는 복잡한 도심의 구조로 인한 미세먼지 농도의 강화 가능성에 대하여 데이터 마이닝 기술과 군집분석을 이용해 조사하였다. 데이터 마이닝 분석에서 미세먼지 농도와 서울지역 도시용도 데이터 사이에는 유의한 상관관계를 보이지 않았다. 그러나 전국 공공데이터를 기반으로 한 군집분석에서는 건물의 높이(층수)에서 특히 PM₁₀과 강한 상관관계가 나타났다. 단일 케노피 모델(Single Canopy Model) 및 미기상 도시모델링 프로그램(ENVI-Met.4)을 사용한 모델링 분석을 실시하여 도시지역에서 모사된 대기 대류가 건물 분포 및 높이 유형의 배열에 따라 다양한 난류의 패턴을 구현함을 확인하였다. 도시 건물의 복잡한 구조는 대류활동을 제어하여 정체상태를 유도하고 지표 부근의 미세먼지 강화가능성을 초래 하였다. 따라서 도심 구조와 형태에 따른 열환경의 변화로 인한 정체 효과는 미세먼지 산정에 있어서 반드시 고려되어야 한다. 복잡한 도시지역의 미세먼지 잔류확률에 대한 정보를 제공하기 위해서는 대기정체 현상이 중요한 의미로 해석될 수 있다.

• 환경위생공학
• /
• 제19권4호
• /
• pp.9-18
• /
• 2004

In this study, the observation data for the yellow sandy dust phenomena from the year 1999 to 2003 at background sites in Korea were collected at Global Atmospheric Observatory at An-Myeon island and its temporal variation were analyzed. The chemical characteristics of the fine particles were also analyzed in order to evaluate sources of the yellow sandy dust particles. The results showed that the monthly average mass concentration of the fine particles was the highest in springtime and the lowest in summertime in general. The magnitude of its variation was also the highest in March in which the occurrence of yellow sandy dust was the most frequent and thus the number of samples was the largest, while the lowest in June through September. The yearly variation of ion components contributions to the total mass concentration of the fine particles was slowly decreasing, showing that $63\%$ in 1999, $59\%$ in 2000 and $56\%$ in 2003. The most prevalent ion components in the fine particles were found to be $NO_3$ and $SO_4^{2-}$, which are known to be source materials of acidic precipitation, and $NH_4^+$, a neutralizing material of the acid precipitation. Relative proportion of metal components in the fine particles was calculated as $14\%$ in average, and their concentrations are in an order of Fe > Al > Na > Ca > Zn > Pb > Cu > Mn > Ni > Cd > Cr > Co > U. The results indicated that main sources of the metals was soil-originated Fe, Al, Ca, and Mg, and the contribution of anthropogenic air Pollution-originated Zn, Pb, Cu, Mn were also high and keep slightly increasing. Statistical analysis showed that the chemical components could be divided into soil-originated group of Mg, Al, Ca, Fe, and Mn and air pollution-originated group of $NO_3$, Zn, Pb, and they are occupying more than $60\%$of all the components in the dusty sand. The results explain that An-Myeon island is more influenced by soil-originated source than ocean-originated one and also the influencing strength of anthropogenic poilution-originated source is less than $50\%$ of that of soil-originated sources. Compared to non-yellow sandy period, the yellow sandy dust period showed that the amounts of soil-originated $Mg^{2+}$ and $Ca^{2+}$ and ocean-originated $Na^+$ and $Cl^-$ were increased to more than double and the metals of Mg, Al, Ca, Fe were also highly increased, while micro metal components such as Pb, Cd, Zn, which have a tendency of concentrating in air, were either decreased or maintained at nearly constant level. In the period of yellow sandy dust, a strong positive correlation was observed between water soluble ions and between metals in terms of its concentration, respectively. Factor analysis showed that the first group being comprised of about $43\%$ of the total inorganic components was affected by soil and they are ions of $Na^+,\;Mg^{2+}\;and\;Ca^{2+}$ and metals of Na, Fe, Mn and Ni. The result also showed that the metals of Mg and Cr were classified as second group and they were also highly affected by soil sources.

• 대한원격탐사학회지
• /
• 제32권5호
• /
• pp.413-421
• /
• 2016

본 연구는 제주 고산에서 Moderate Resolution Imaging Spectroradiometer(MODIS)로 산출된 Aerosol Optical Depth(AOD)와 지표면 $PM_{2.5}$와의 상관성 연구를 수행하였다. 이를 위해 위성자료, 선포토미터, Optical Particle Counter(OPC), Micro Pulse Lidar(MPL)자료가 사용되었다. 2009년 10월 14일부터 24일까지 고산에서 측정된 선포토미터 L2.0자료와 $PM_{2.5}$ 자료의 초기 상관성 검토에서는 $R^2=0.48$의 상관성을 보였지만 고산에서 측정된 Micro-Pulse Lidar Network(MPLNet)의 에어로졸 수직분포 데이터를 사용하여 옅은 구름이나 황사의 영향을 제거한 후에는 상관성이 개선되어 $R^2=0.60$ 이상의 값이 산출되었다. 이러한 결과는 인공위성 자료로부터 측정된 AOD를 이용하여 대기 미세먼지 감시에 활용할 수 있는 가능성을 확인하여 주었다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2019년도 제60차 하계학술대회논문집 27권2호
• /
• pp.397-400
• /
• 2019

급격히 증가하는 자동차 수, 발전량 증가 등으로 인하여 미세먼지로 인한 환경오염이 심각한 사회문제로 대두되고 있는 실정이다. 50개가 넘는 국가들이 권고치 이상의 미세먼지로 인해 피해를 받고 있으며 각 피해국들은 미세먼지 저감 대책 및 발생을 최소화하기 위한 방안을 연구하고 있다. 하지만 현재 고정형 미세먼지 취득 드론으로는 다양한 포인트의 미세먼지 데이터를 수집하기 힘든 상황이며, 기존 드론을 활용한 방법에서 도 회전 날개의 영향으로 인해 정확한 데이터를 수집하기 힘든 실정이다. 본 논문에서는 드론과 특정 구조물을 활용한 미세먼지 수집 방법을 제안하고 이의 효율성을 보여주고자 한다.

• 한국입자에어로졸학회지
• /
• 제19권2호
• /
• pp.43-53
• /
• 2023

In this study, the ventilation system of the enclosed conveyor belt for coal transportation was evaluated, and the particle removal efficiency according to the ventilation conditions was identified using computational fluid dynamics and particle behavior analysis. The most effective way to remove dust generated inside the closed conveyor belt is to adjust the position of the exhaust port of the duct so that the air is exhausted around the rear of the conveyor belt. And this method seems to work for another narrow and long spaces where air enters in one direction. In addition, when the air flow rate of the each duct was less than 300 CMM, it was efficient to increase the flow rate of the duct located at the rear of the conveyor belt, and when the flow rate of the each duct was higher than 300 CMM, it was efficient to increase the flow rate of the duct located at the front of the conveyor belt.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.331-342
• /
• 2010

Aerosol physical properties have been measured at Pusan National University by using the 16-channel LPC(Laser Particle Counter), and particle characteristics have been examined for the period from Aug. 4 2007 to Dec. 30, 2008. Annual total average, seasonal average, and other averages of the meteorologically classified four categories such as Asian dust, precipitation, foggy, and clear days are respectively described here. Both annually and seasonally averaged number concentration show three peaks at the particle diameter of 0.3, 1.3, and $4{\mu}m$, respectively. However, the first peak for summer season tends to be shifted toward smaller size than other seasons, implying the strong fine particle generation. Meteorological condition shows strong contrast in aerosol concentrations. In Asian dust case, relatively lower number concentrations of fine particles (i.e., smaller than $0.5{\mu}m$) were predominant, while higher concentrations of coarse particles were found particularly for the size bigger than $0.5{\mu}m$. In precipitation day, number concentrations were decreased by approximately 30% due to the removal process of precipitation. Foggy day shows significantly higher concentrations for fine particles, implying the importance of the aerosol condensation process of micro-fine-particle growing to fine-particle. Finally the regressed particle size distribution function was fitted optimally with two log-normal distribution, and discussed the similarities and differences among four categorized cases of the Asian dust, precipitation, foggy, and clear days.