• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.162-169
• /
• 1999

In this paper, it is presented a new scheme of adaptive-neuro control system to implement real-time control of robot manipulator using digital Signal Processors. Digital signal processors DSPs. are micro-processors that are particularly developed for variables. Digital version of most advanced control algorithms can be defined as sums and products of measured variables, thus it can be programmed and executed through DSPs. In addition, DSPs are as fast in computation as most 32-bit micro-processors and yet at a fraction of their prices. These features make DSPs a biable computatinal tool in digital implementation of sophisticated controllers. Unlike the well-established theory for the adaptive control of linear systems, there exists relatively little general theory for the adaptive control of nonlinear systems. Adaptive control technique is essential for providing a stable and robust performance for application of robot control. The proposed neuro control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method. The proposed adaptive-neuro control scheme is illustrated to be a efficient control scheme for implementation of real-time control of robot system by the simulation and experiment.

• 한국항행학회논문지
• /
• 제21권5호
• /
• pp.450-458
• /
• 2017

본 연구에서는 곤충모방 날갯짓 비행체의 모델링과 제자리비행을 위한 자세제어 및 고도제어기를 설계하여 동역학 모델을 이용한 시뮬레이션을 수행하고 그 결과를 분석하였다. 곤충모방 날갯짓 비행체의 간략화한 날갯짓 운동, 날갯짓의 병진운동 및 회전운동에 대한 공력, 동체 동역학에 대해 수치모델링을 수행하였다. 제자리비행 자세제어를 위해 날갯짓 비행체가 가지는 시변 비선형 시스템을 선형화하여 설계한 LQR(Linear Quadratic Regulator) 제어기법을 통하여 자세안정화를 적용하였으며 PID 제어기법을 통해 고도제어를 수행하였다. 수치 시뮬레이션을 통해 설계된 모델과 제어기의 성능을 확인하였으며 제자리비행을 위한 자세안정화 및 고도 제어가 안정적으로 수행되는 것을 확인하였다. 또한 날갯짓에 의해 발생하는 주기적인 피칭 모멘트를 주기적인 제어입력을 통해 임계 안정하도록 자세 안정화를 수행하는 것을 확인 하였다.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.474-482
• /
• 1992

This paper describes the speed control system of an induction type ac servomotor drive on the vector control basis of slip frequency and constant secondary flux control for a quick torque response. The system is composed of a digital controller using a SCB-V50 microprocessor and a PWM inverter with power MOSFETs for high speed switching. And, for the measurement of actual instantaneous currents, MDCS A070-051 hall sensors are employed. The rising time of step responce by this system through the test of a 600[W] ac servomotor is 30[ms]. Overall experimental result shows that the drive performance of the system is similar to that of a separately excited armature current control of a dc motior.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.342-347
• /
• 2002

After the industrial revolution in 20 century, the world are preparing for new revolution that is society with knowledge for a basis such as IT(Information Technology), NT(Nano Technology) and BT(Bio Technology). Recently, NT is applied to various fields that are composed of science, industry, media and semiconductor-micro technology. It has need of IT that is ultra-precision positioning technology with strokes of many hundreds mm and maintenance of nm precision in fields of ultra micro process, ultra precision measurement, photo communication part and photo magnetic memory. Performance test of servo control system that is used ultra-precision positioning system with single plane X-Y stage is performed by simulation with Matlab. Analyzed for previous control algorithm and adapted for modern control theory, dual servo algorithm is developed by minimum order observer, and stability and priority on controller are secured. Through the simulation and experiments on ultra precision positioning, stability and priority on ultra-precision positioning system with single plane X-Y stage and control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE

• 대한의용생체공학회:의공학회지
• /
• 제12권1호
• /
• pp.9-18
• /
• 1991

A micro- computer system has been designed to evaluate the performance of commercial infant incubator and to develope the temperature controller of new incubator. The measure- ment system used a hybrid of analog electronics for amplification, integration, and switches and micro-computer for data storage, data display, and control of relay. This approach has been applied to measure the warm-up time, temperature stability, open/close door and port- holes, and temperature distribution on the mattress. The micro-computer provides on-line ac cess of multi-point temperature data, simplifies the analog part of the circuit and gives the flexibility.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.291-291
• /
• 2000

A vehicle driving simulator is a virtual reality device which a human being feels as if the one drives a vehicle actually. Driving Operation System acts as an interface between a driver and a driving simulator. This paper suggests the driving operation system for a driving simulator. This system consists of a controller, DC geared motor, MR brake, rotary encoders, steeping motor and bevel gear box. Reaction force and torque on the steering system were made by DC_Motor and MR_Brake. Reaction force and torque on the steering system were compare between real car and a driving simulator. The controller based on the 80C196KC micro processor that manage and transfer signal.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.501-502
• /
• 2018

기존의 초소형 마이크로 컨트롤러는 소형화로 인해 메모리 용량이 적기 때문에 통신에만 중점을 두었다. 이로 인해 컨트롤 시스템에서 사용자 편의성을 위한 UI를 탑재하기 어렵고 많은 기능을 추가할 수 없는 문제가 발생하였다. 이를 해결하기 위해 본 논문에서는 컨트롤 시스템의 경량화와 인코딩 방법론을 제안한다. 또한, 기존 시스템에서 한글화가 어려웠던 문제점을 극복하여 사용자의 편의성을 증대시켰다. 그리고 시스템 경량화를 통해 확보한 메모리 공간에 다양한 기능을 추가할 수 있을 것으로 사료된다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 추계학술대회
• /
• pp.127-129
• /
• 1992

In this paper, we describe about control system for eletro-hydraulic LVAD(Left Ventricular Assist Device) and control algorithm for two operation mode. One is asynchronous operation mode and the other is synchronous operation mode synchronized with natural heart's R pulse. We also present implementation method of software PI algorithm for velocity control of motor used in LVAD system and its response.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.417-422
• /
• 1990

For the robot manipulator in performing precision task, it is indispensable that the robot utilize the various sensors for intelligence. This paper presents the development and implementation of an integrated control system for the control of robotic manipulator, a feeder, a conveyor belt system, force/torque sensor system, and a photo sensor system. Micro controller board was constructed for hierarchical control of the system. To set up the program interactively, a user can make use of the software which includes the full-down menu and a dialog box. The user can make progress the program quickly and easily by a mouse. The related software was written in C and assembly languages.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.871-878
• /
• 2003

With the development of micro -technology, the demand for micro actual ing device is increasing. But, it is difficult to achieve high resolution and wide bandwidth with the conventional contact systems. So, the contact-free systems which are suspended or levitated by magnetic force or air bearing were proposed. These systems can be applied to high precision stages and alignment apparatuses. This paper describes a magnetically suspended system with four degrees of freedom which are composed of three rotations (roll, pitch, yaw), and one translation ( z). The operating principle and the structure of the system are similar to variable reluctance type electric machines. In this study, the force analysis is executed using magnetic circuit and virtual work principle, and the equations that describe the dynamics of the system are presented. The multivariable PID controller is adapted to the system and the experiment is executed.