Sahani, Ashok Kr.;Samanta, Amiya K.;Roy, Dilip K. Singha
Advances in concrete construction
/
제7권4호
/
pp.263-275
/
2019
In the present work, Granulated Blast Furnace Slag (GBFS) and Fly ash (FA) were used as partial replacement of Natural Sand (NS) and Ordinary Portland Cement (OPC) by weight. One control mix, one with GBFS, three with FA and three with GBFS-FA combined mixes were prepared. Replacements were 50% GBFS with NS and 20%, 30% and 40% FA with OPC. Preliminary investigation on development of compressive strength was carried out at 7, 28 and 90 days to ensure sustainability of waste materials in concrete matrix at room temperature. After 90days, thermo-mechanical study was performed on the specimen for a temperature regime of $200^{\circ}-1000^{\circ}C$ followed by furnace cooling. Weight loss, visual inspection along with colour change, residual compressive strength and microstructure analysis were performed to investigate the effect of replacement of GBFS and FA. Although adding waste mineral by-products enhanced the weight loss, their pozzolanicity and formation history at high temperature played a significant role in retaining higher residual compressive strength even up to $800^{\circ}C$. On detail microstructural study, it has been found that addition of FA and GBFS in concrete mix improved the density of concrete by development of extra calcium silicate gel before fire and restricts the development of micro-cracks at high temperature as well. In general, the authors are in favour of combined replacement mix in view of high volume mineral by-products utilization as fire protection.
To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.
In Korea, more than 30,000 tons of waste Styrofoam are produced every year. Styrofoam is spent more than 500 years decomposing during the reclamation process, so it needs to be recycled. The recycling rate of waste styrofoam continues to be the third highest in the world, but it is lower than that of Germany and Japan. Therefore, measures are needed to increase the recycling rate of waste Styropol. Another problem is that cement is mainly used in existing lightweight foam concrete. However, large amounts of CO2 from cement-producing processes cause environmental pollution. Currently, Korea is increasing its greenhouse gas reduction targets to cope with energy depletion and climate change, and accelerating efforts to identify and implement reduction measures for each sector. In 2013 alone, about 600 million tons of carbon dioxide was generated in the cement industry. Therefore, this study replaces CO2 generation cement with furnace slag fine powder, uses crude steel cement for initial strength development of bubble concrete, and manufactures hardening materials to study its properties using waste styrofoam. As a result of the experiment, the hardening agent replaced by micro powder of furnace slag was less intense and more prone to absorption than cement using ordinary cement. Further experiments on the segmentation and strength replenishment of furnace slag are believed to contribute to the manufacture of environmentally friendly lightweight foam concrete.
Fe based (Fe$_{68.2}$C$_{5.9}$Si$_{3.5}$B$_{6.7}$P$_{9.6}$Cr$_{2.1}$Mo$_{2.0}$Al$_{2.0}$) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The Fe-based amorphous powders and the Fe-Cu composite powders were compacted by a spark plasma sintering (SPS) process. Densification of the Fe amorphous-Cu composited powders by spark plasma sintering of was occurred through a plastic deformation of the each amorphous powder and Cu phase. The SPS samples milled by AGO-2 under 500 rpm had the best homogeneity of Cu phase and showed the smallest Cu pool size. Micro-Vickers hardness of the as-SPSed specimens was changed with the milling processes.
Park, Eun-Mi;Nam, Bo-Hye;Kim, Young-Ok;Kong, Hee-Jeong;Kim, Woo-Jin;Lee, Sang-Jun;Kong, In-Soo;Choi, Tae-Jin
Fisheries and Aquatic Sciences
/
제10권3호
/
pp.119-126
/
2007
The analysis of expressed sequence tags (ESTs) is an efficient approach for gene discovery, expression profiling, and the development of resources for functional genomics. To analyze the transcriptome of the abalone Haliotis discus hannai, we conducted EST analysis using seven cDNA libraries made from gill, gut, hepatopancreas, skin, muscle, testis, and ovary. Redundant ESTs were assembled into overlapping contiguous sequences using the assembly program ICAtools. We found that the total 1,393 ESTs formed 135 clusters and 951 singletons, indicating that the overall redundancy of the library was 22%. Of the 1,393 clones, BLAST identified 1,278 clones (91.7%) as known genes; 115 clones (8.3%) did not match any previously described gene. Based on the major functions of their encoded proteins, the identified clones were classified into 16 broad categories. Sequence analysis revealed the presence of micro satellite-containing genes that may be valuable for further gene mapping studies. This study contributes to the identification of numerous EST clones that can be applied to further clarifying the genetics and developmental biology of abalone.
지금까지 연구된 고인성 섬유 복합체의 주요 결합재는 시멘트이다. 이 연구의 목적은 시멘트를 전혀 사용하지 않은 고로슬래그 기반 알칼리 활성 모르타르와 PVA(polyvinyl alcohol) 섬유를 이용하여 고인성을 나타내는 복합체에 대한 가능성을 검토하는 것이다. 이를 위하여 알칼리 활성화제 종류에 따라 균일한 섬유 분산성을 확보하면서 섬유 혼합을 용이하게 하기 위한 적절한 모르타르의 유동성 및 점성을 갖는 두 가지 배합을 결정하였고, 복합체의 기본적인 성능을 평가하기 위하여 슬럼프 플로, 압축강도, 일축인장, 휨 실험을 수행하였다. 실험 결과 두 가지 배합의 슬럼프 플로는 평균 465 mm로 나타났고, 약 2% 정도의 인장 변형 성능과 다중 미세균열을 나타내는 것을 확인하였다. 이를 통하여 시멘트를 전혀 사용하지 않고도 변형률 경화 거동에 의한 고인성을 나타내는 섬유 복합체의 개발 가능성을 입증하였다.
Kim, Nam-Sook;Vang, Mong-Sook;Yang, Hong-So;Park, Sang-Won;Park, Ha-Ok;Lim, Hyun-Pil
The Journal of Advanced Prosthodontics
/
제1권1호
/
pp.47-55
/
2009
STATEMENT OF PROBLEM. A few of studies which compared and continuously measured the stability of various surface treated implants in the same individual had been performed. PURPOSE. We aim to find the clinical significance of surface treatments by observing the differences in the stabilization stages of implant stability. MATERIAL AND METHODS. Eight different surface topographies of dental implants were especially designed for the present study. Machined surface implants were used as a control group. 4 nano-treated surface implants(20 nm $TiO_2$ coating surface, heat-treated 80 nm $TiO_2$ coating surface, CaP coating surface, heat treated CaP coating surface) and 3 micro-treated surface implants [resorbable blast media(RBM) surface, sandblast and acid-etched(SAE) surface, anodized RBM surface] were used as experiment groups. All 24 implants were placed in 3 adult dogs. $Periotest^{(R)}$ & ISQ values measured for 8 weeks and all animals were sacrificed at 8 weeks after surgery. Then the histological analyses were done. RESULTS. In PTV, all implants were stabilized except 1 failed implants. In ISQ values, The lowest stability was observed at different times for each individual. The ISQ values were showed increased tendency after 5 weeks in every groups. After 4 to 5 weeks, the values were stabilized. There was no statistical correlation between the ISQ values and PTV. In the histological findings, the bone formation was observed to be adequate in general and no differences among the 8 surface treated implants. CONCLUSIONS. In this study, the difference in the stability of the implants was determined not by the differences in the surface treatment but by the individual specificity.
최근 사회기반 구조물이 대형화, 특수화, 다양화 되어감에 따라 강도적인 측면과 환경적인 측면에 부합하는 건설재료를 필요로 하고 있다. 따라서, 시멘트 제조시 주원료인 석회석 미분말을 사용하여 에너지 감축과 $CO_2$발생을 절감하고자 하였으며, 환경부하 저감형 건설재료로 부각되고 있는 고로슬래그, 플라이애쉬를 사용하고자 하였다. 본 연구에서는 수화생성물의 결합력에 따른 화학적 특성을 고려해 내구성 측면을 파악하고자 한다. 그 결과 3일 압축강도가 30 Mpa 이상 측정되었다. 또한 석회석 미분말의 사용량이 증가함에 따라 응결시간이 빨라지고, 길이변화에서 팽창되는 특징을 가지고 있다. 그리고 보통 포틀랜드 시멘트를 사용하였을 때와 비교하여 재령 7일 이전에는 휨강도가 높은 것으로 측정되는 등 기존 건설용 재료를 대체할 가능성이 충분하다고 판단되어진다.
근년에 와서 우리나라 건설업체의 해외진출이 빈번해 지고 있는 시점에서 특히 동남아 지역에서 대형 해양콘크리트구조물 등의 수주물량이 크게 증가하고 있는 추세를 감안하여 콘크리트 품질향상의 일환으로 광물질혼화재를 혼합한 고강도콘크리트에 착안하게 되었다. 그래서 광물질혼화재의 혼합률을 각각 달리하여 현장의 기후조건을 고려한 양생온도 $23^{\circ}C$ 및 $35^{\circ}C$의 2 종류와 양생조건을 3 종류로 변화시킨 4 배합, 16종류의 고강도콘크리트를 제조하였다. 본 연구 결과, 광물질혼화재를 혼합한 고강도콘크리트를 $35^{\circ}C$로 양생한 경우 초기재령에서 압축강도가 $23^{\circ}C$로 양생한 경우보다 컸으나 재령 28일 이후에는 반전되었다. 특히 고로슬래그미분말, 실리카흄과 팽창재 혼합 및 고로슬래그미분말과 실리카흄을 혼합한 고강도콘크리트의 총통과전하량은 각각 Negligible 및 Very low에 해당되는 매우 좋은 결과를 나타내었다. 따라서 고로슬래그미분말, 실리카흄 및 팽창재를 각각 적정량 혼합함에 따라 밀실한 고강도콘크리트의 제조가 가능하게 됨으로써 염화물이온 침투저항성이 크게 향상되었다.
환경문제에 대한 높은 관심으로 친환경 콘크리트의 개발을 위해 많은 연구가 수행되어지고 있으며, 특히 콘크리트 배합 시 시멘트 사용량을 줄이기 위한 노력이 계속되고 있다. 시멘트 사용량을 줄이기 위한 방법으로 고로슬래그, 플라이애쉬, 메타카올린 등 포졸란반응재료들이 혼화재료로 많이 사용되고 있다. 우리나라 전역에 널리 매장되어 있는 황토는 친환경 재료로서 황토를 활성화시킨 활성황토는 포졸란반응을 하는 메타카올린계의 일종으로 콘크리트의 혼화재료로 활용성이 증가하고 있다. 또한 재생 PET섬유는 폐 PET병을 재활용하여 만든 친환경재료로서 콘크리트에 혼입되어 미세균열을 제어하는 역할을 한다. 하지만 보강섬유를 혼입한 콘크리트에 대한 연구는 아직도 미비한 실정이고 활성황토를 혼화재로 사용한 철근 황토 콘크리트의 경우 활성황토 혼화재의 포졸란반응과 보강섬유의 보강 효과가 복합적으로 나타날 것으로 판단된다. 따라서 본 연구에서는 에너지 절약 차원에서의 친환경 재료인 활성황토와 재생 PET 섬유를 혼입한 철근콘크리트 보의 거동 특성을 확인하기 위하여 재생 PET섬유를 혼입한 철근 황토콘크리트 보 시험체를 제작하여 휨 거동을 수행하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.