• Mycobiology
• /
• v.40 no.3
• /
• pp.151-158
• /
• 2012

Very few studies have addressed the phylogenetic diversity of fungi from Northeast India under the Eastern Himalayan range. In the present study, an attempt has been made to study the phylogenetic diversity of culturable soil fungi along the altitudinal gradients of eastern Himalayas. Soil samples from 24 m above sea level to 2,000 m above sea level altitudes of North-East India were collected to investigate soil micro-fungal community structure and diversity. Molecular characterization of the isolates was done by PCR amplification of 18S rDNA using universal primers. Phylogenetic analysis using BLAST revealed variation in the distribution and richness of different fungal biodiversity over a wide range of altitudes. A total of 107 isolates were characterized belonging to the phyla Ascomycota and Zygomycota, corresponding to seven orders (Eurotiales, Hypocreales, Calosphaeriales, Capnodiales, Pleosporales, Mucorales, and Mortierellales) and Incertae sedis. The characterized isolates were analysed for richness, evenness and diversity indices. Fungal diversity had significant correlation with soil physico-chemical parameters and the altitude. Eurotiales and Hypocreales were most diverse and abundant group of fungi along the entire altitudinal stretch. Species of Penicillium (D=1.44) and Aspergillus (D=1.288) were found to have highest diversity index followed by Talaromyces (D=1.26) and Fusarium (D=1.26). Fungal distribution showed negative correlation with altitude and soil moisture content. Soil temperature, pH, humidity and ambient temperature showed positive correlation with fungal distribution.

• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.61-70
• /
• 2007

Korean large limestone mines started to employ bulk emulsion explosives to improve the productivity in early 2000s. As the application of the bulk emulsion explosives became common in the mid 2000s, the bulk emulsion application increases overall performance but it tends to decrease the moving and heaving because it lacks in gas volume and heat energy. Therefore, the chemical gassing technique was introduced to improve the blasting efficiency of the existing bulk emulsion explosives. The chemical gassing is a technique to replacing GMB(Glass Micro Balloon), which is used for a sensitizer, with gassing agent to chemically sensitize it. This paper introduces the case of successful application of chemical gassing in a Korean large limestone mine. We also compared and evaluated the blast and work efficiency between bulk emulsion GMB & gassing agent (chemical gassing). The results indicate that the replacement of GMB with gassing agent improved fragmentation in the upper part and toe of a bench as well as moving efficiency of the material.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.177-184
• /
• 2015

In order to use the high-volume slag cement as a construction materials, a proper activator which can improve the latent hydraulic reactivity is required. The dissolved aluminum silicon ions from ground granulated blast furnace slag (GGBFS) react with sulfate ions to form ettringite. The proper formation of ettringite can increase the early-age strength of high-volume GGBFS (80%) cement. The aim of this study is to investigate the hydration properties with sulfate activators (sodium sulfate, anhydrite). In this paper, the effects of $Na_2SO_4$ and $CaSO_4$ on setting, compressive strength, hydration, micro-structure were investigated in high-volume GGBFS cement and compared with those of without activator. Test results indicate that equivalent $SO_3$ content of 3~5% improve the early-age hydration properties such as compressive strength, heat evolution rate, micro-pore structure in high-volume GGBFS cement.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.1
• /
• pp.58-71
• /
• 2009

The blast wave released during the initiation of energetic materials gives rise to pulse energy generation, characterized by a sudden increase of potential energy. A highly efficient energy source, sought from pulse-type lasers, may be utilized in various space propulsion and power applications. This paper introduces a scheme of utilizing the laser energy in 1) attitude control of a satellite requiring of a low thrust, 2) innovative laser-induced drug delivery, 3) implosion-based micro piston development, 4) deflecting and zapping of space debris for laser kill purpose, and 5) finally lunar detection using laser induced breakdown spectroscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.167-167
• /
• 2013

최근 발수 특성은 자동차 표면, 건축 구조물, 가전제품 및 모바일 기기 등 여러 분야에서 사용되고 점차 그 필요성이 대두되고 있다. 이러한 발수성의 표면은 연 잎이나 곤충의 날개, 도마뱀의 발바닥 등 자연계의 여러 곳에서 관찰 할 수 있다. 특히 연 잎의 표면에서 나타나는 초발수 특성이 마이크로와 나노 크기의 돌기 구조와 표피 왁스 성분에 기인한다는 것이 밝혀지면서 이를 응용한 다양한 연구가 진행되고 있다. 본 연구에서는 물리적인 표면처리로 마이크로와 나노 구조물을 형성하고 그 위에 표면에너지를 낮출 수 있는 물질을 증착하여, 발수 특성을 가지는 표면을 개발하였다. 알루미늄 표면에 마이크로 크기의 알루미나(Al2O3) 분말을 이용한 블라스트(blast) 공정으로 마이크로 구조를 형성하고, 선형 이온 소스(LIS)를 이용한 Ar 이온 빔 에칭으로 나노 구조를 형성하였다. FE-SEM 분석을 통해 수~수십 마이크로 구조 위에 나노 크기의 구조가 형성 된 것을 관찰하였다. 마이크로와 나노 구조가 형성된 알루미늄의 표면에너지를 낮추기 위해 trimethylsilane (TMS) 및 Ar을 이용한 플라즈마처리로 표면에 기능성 코팅막을 형성하였다. 그 결과 TMS처리 전에 비해 표면에너지가 99.75 mJ/m2에서 9.05 mJ/m2으로 급격히 낮아지고 접촉각이 $54^{\circ}$에서 $123^{\circ}$로 향상되었다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.277-282
• /
• 2004

In a hardened concrete, diffusion of oxygen, carbon dioxide, aggressive ions, and moisture from the environment to the concrete takes place through the pore network. It is well known that making dense cement matrix enhances the durability of concrete as well as all the characteristics including strength of concrete. In this paper,9 mix concretes with water to cementitious material ratio (40,45, and $50\%$) and replacement ratio of GGBFS (40 and $60\%$ of cement by weight) were studied on the micro-pore structure by mercury intrusion porosimetry and the accelerated chloride diffusion test by potential difference. From the results the average pore diameter and accelerated chloride diffusivity of concrete were ordered NPC > G4C > G6C. It is concluded that there is a good correlation between the average pore diameter and the chloride diffusivity, and the mineral admixtures has a filling effect, which increases the tortuosity of pore and makes large pores finer, on the pore structure of cement matrix due to the latent hydraulic reaction with hydrates of cement.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.23-26
• /
• 2000

In order to develop the specific genetic marker for Korean native cattle (Hanwoo), randomly amplified polymorphic DNA (RAPD) analysis of 6 different cattle breeds was attempted by using 38 decamer primers. In comparison of RAPD patterns, two distinctive DNA bands specific for Hanwoo were detected. One was 296 bp of DNA fragment found to be specific only for female Hanwoo when primer GTCCACACGG was employed. In individual analysis of this RAPD marker was observed only in female individuals with the possibility of $85.3\%$. The other was 521 bp of RAPD marker amplified using TCGGCGATAG and AGCCAGCGAA primers, which showed $83.0\%$ of genetic frequency in 85 male and 68 female individuals tested. Nucleotide sequencing of these genetic markers revealed that 296 bp marker has a short micro satellite-like sequence, ACCACCACAC, and a tandem repeat sequence of microsatellite GAAAAATG in the determined sequence. Two distinctive tandem repeats of microsatellite sequences, MC and GAAGA, were also appeared in 521 bp DNA marker. In BLAST search, any gene having high homology with these markers was not found.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.185-185
• /
• 2012

최근 자연모사를 이용한 연구가 다양한 분야에 적용되고 있다. 특히 연 잎의 표면에서 나타나는 초발수 특성이 마이크로 나노 크기의 구조와 표면에너지를 제어하는 에피큐티클 왁스에 기인하다는 것이 밝혀지면서 이를 응용한 연구가 진행되고 있다. 본 연구는 알루미늄 표면처리로 마이크로와 나노 구조물을 형성하고 그 위에 발수 특성을 가진 물질을 증착하여, 발수성을 가지는 표면을 개발하였다. 알루미늄 표면에 마이크로 크기의 알루미나($Al_2O_3$) 분말을 이용한 블라스트(blast) 공정으로 표면에 마이크로 구조를 형성하고, Linear Ion Source(LIS)를 적용한 Ar 이온빔 에칭으로 나노 구조를 형성하였다. FE-SEM 분석을 통해 수~수십 마이크로 구조 위에 나노 크기의 구조가 형성 된 것을 관찰하였다. 마이크로 나노 구조가 형성된 알루미늄의 표면에너지를 낮추기 위해 trimethylsilane(TMS) 및 Ar을 이용한 플라즈마처리로 표면에 기능성 코팅막을 형성하였다. 그 결과 TMS 발수 코팅하기 전에 비해 표면에너지가 $99.75mJ/m^2$에서 $9.05mJ/m^2$으로 급격히 낮아지고 접촉각 값이 $123^{\circ}$로 향상된 것을 확인하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1113-1116
• /
• 2008

The application of High Performance Concrete (HPC) for protecting bridge deck concrete with micro-silica, fly-ash and ground granulated blast-furnace slag was introduced to North America in the early 1980's. This report introduces the literature reviews of high performance concrete for protecting concrete bridge deck and explains 2-different types of construction methods using this materials. One is high performance concrete overlay method and the other is full depth bridge deck method. Both methods have been successfully applied and demonstrated in north america. Especially, modified high performance concrete overlay method including silica-fume and PVA fiber has been successfully applied in korea also. Therefore, both methods that high performance concrete overlay and full depth bridge deck are considered as reasonable bridge deck protecting methods compared with the conventional bridge deck system using asphalt modified materials.

• Advances in concrete construction
• /
• v.7 no.4
• /
• pp.263-275
• /
• 2019

In the present work, Granulated Blast Furnace Slag (GBFS) and Fly ash (FA) were used as partial replacement of Natural Sand (NS) and Ordinary Portland Cement (OPC) by weight. One control mix, one with GBFS, three with FA and three with GBFS-FA combined mixes were prepared. Replacements were 50% GBFS with NS and 20%, 30% and 40% FA with OPC. Preliminary investigation on development of compressive strength was carried out at 7, 28 and 90 days to ensure sustainability of waste materials in concrete matrix at room temperature. After 90days, thermo-mechanical study was performed on the specimen for a temperature regime of $200^{\circ}-1000^{\circ}C$ followed by furnace cooling. Weight loss, visual inspection along with colour change, residual compressive strength and microstructure analysis were performed to investigate the effect of replacement of GBFS and FA. Although adding waste mineral by-products enhanced the weight loss, their pozzolanicity and formation history at high temperature played a significant role in retaining higher residual compressive strength even up to $800^{\circ}C$. On detail microstructural study, it has been found that addition of FA and GBFS in concrete mix improved the density of concrete by development of extra calcium silicate gel before fire and restricts the development of micro-cracks at high temperature as well. In general, the authors are in favour of combined replacement mix in view of high volume mineral by-products utilization as fire protection.