• Korean Journal of Pharmacognosy
• /
• v.25 no.4 s.99
• /
• pp.307-310
• /
• 1994

A hitherto unknown substance was isolated from the commercial sample of Aloe arborescens, which was shown to be the 4',6'-O-ethylidene-aloenin, most likely an artifact caused by hot-air drying procedure for the product preparation.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2001.06b
• /
• pp.25-27
• /
• 2001

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.596-602
• /
• 2020

Blending process of adhesive production has a cooling process to cool down the temperature of the solution which was heated up to 76 ℃ with a mineral insulated (MI) cable by 30 ℃ at room temperature. Using a MI cable in the adhesive production process makes the production inefficient because it takes about 10 h for the cooling process. If a jacketed vessel is used instead of the MI cable, it would shorten the cooling downtime without any additional cooling system by using cold water. However, there are various types of jacketed vessels, and thus the most suitable type should be found before set up. In this study, we designed the optimized jacketed vessel for the adhesive production process by calculating the cooling downtime, which impacts production efficiency, as a function of the jacket types using computational fluid dynamics. As a result, the cooling performance of the plain jacket was 32.7% superior to that of the half-pipe coil jacket with the same height. In addition, the plain jacket with 60% spiral baffle reduced the cooling downtime and operating time by 80.4% and 25.1%, respectively.

• Korean Journal of Environmental Biology
• /
• v.32 no.3
• /
• pp.243-249
• /
• 2014

In this study, we evaluated the toxic effects of heavy metals (Cd, Cu, Zn) on the population growth rate (r) of the marine diatom, Skeletonema costatum. S. costatum. The population growth rate (r) of the species was determined after 96 hrs. of exposure to Cd (0, 0.63, 1.25, 2.50, 5.00, 10.00 ppm), Cu (0, 0.25, 0.50, 0.75, 1.00, 1.25, 1.50 ppm) and Zn (0, 0.31, 0.63, 1.25, 2.00, 2.50, 5.00 ppm). It was observed that 'r' in the control (absence of Cd, Cu and Zn) were greater than 0.05, however suddenly decreased with increased heavy metal concentrations. Cd, Cu and Zn reduced 'r' in a dose-dependent manner and a significant reduction were occurred at concentration of greater than 1.25, 1.25 and 2.50 ppm, respectively. Based on the toxicity, the heavy metal were ranked as Cu>Zn>Cd, with EC50 values of 1.11, 2.13 and 6.84 ppm, respectively. The lowest-observed-effective-concentration (LOEC) of 'r' in exposed to Cd, Cu and Zn were 1.25, 1.00, 2.00 ppm, respectively. Precisely, a concentration of greater than 1.25 ppm of Cd, 1.00 ppm of Cu and 2.00 ppm of Zn in marine ecosystems induced toxic effect on the 'r' of S. costatum. Based on our results, we suggested that the 'r' of S. costatum might be a useful bio indicator for the toxicity assessment of heavy metals in marine ecosystems.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.399-403
• /
• 2013

Background: Several studies have reported the role of the miR-146a rs2910164 G > C polymorphism as a susceptibility factor for several digestive cancers. However, the results have been controversial. Therefore, we conducted the present meta-analysis to obtain the most reliable estimate of the association. Methods: PubMed, Embase and Web of Science databases were searched. Crude odds ratios (ORs) with 95% confidence intervals (CIs) were extracted and pooled to assess the strength of the association between miR-146a rs2910164 G > C polymorphism and digestive cancer risk. A total of four eligible studies including 3,447 cases and 5,041 controls based on the search criteria were included. Results: We observed that miR-146a rs2910164 G > C polymorphism was not significantly correlated with digestive cancer risks when all studies were pooled into the meta-analysis. While we found that miR-146a rs2910164 polymorphism was not associated with gastric cancer, it was significantly linked with hepatocellular cancer risk (the homozygote codominant model: OR = 1.40, 95% CI = 1.04-1.87). In the stratified analysis by ethnicity, significant associations were observed in Chinese population for the allele contrast model (OR = 1.25; 95% CI = 1.12-1.38), for the homozygote codominant model (OR = 1.62; 95% CI = 1.28-2.04), and for the recessive model (OR = 1.38; 95% CI = 1.16-1.64). However, studies with Asian groups presented no significant association for all genetic models. Conclusions: This meta-analysis suggests that the miR-146a rs2910164 G > C polymorphism is a low-penetrant risk factor for digestive cancers in Chinese.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.147-158
• /
• 1998

The purpose of this study was to test the stability of TPN basic solutions containing amino acids and dextrose. Test solutions containing $4.25\%$ amino acids in $25\%$ dextrose (central TPN basic solution) or $4.25\%$ amino acids in $10\%$ dextrose (peripheral TPN basic solution) were prepared. Two different amino acids solutions $(Fravasol^{(R)}\;vs\;Freamine^{(R)})$ were tested. The samples were taken from each admixture and stored in the evacuated, sterile containers at $2{\sim}8^{\circ}C$ and ambient room temperature. Each sample was analyzed at 0, 3, 7, 14 and 30 days of storage. Each amino acid was analyzed by amino acid analyzer. Dextrose content was measured by polarimeter. The pH and chromagen formation were also monitored. The decomposition was measured by the changes in concentration of amino acids and dextroser TPN basic $solution-Freamine^{(R)}$ admixture stored at $2\sim8^{\circ}C$ were stable for 30 days. Central and peripheral TPN basic solutions stored at room temperature were stable for 7 days and 14 days, respectively. There were no changes in color for 30 days by naked eye. Amino acid concentrations in TPN basic $solution-Fravasol^{(R)}$ admixture stored at $2\sim8^{\circ}C$ or room temperature were stable for 30 days. But, significant color change was detected according to passing time. In conclusion, Peripheral TPN basic $solution-Fravasol^{(R)}$ admixture stored at room temperature and in refrigerator were stable for 3 days and 7 days, respectively. However, central TPN basic solution-Fravasol admixtures were unstable. Therefore, it is recommended that it should be admixed right before use.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.566-572
• /
• 2014

Maleic anhydride (MAH) grafted polypropylenes (PP) (MAH-g-PP) were prepared by changing MAH content and styrene monomer (SM)/MAH mole ratio with different type PP, using a twin screw extruder. The types of PP were isotatic PP (iPP), block PP (bPP), and random PP (rPP) and dicumyl peroxide (DCP) was used as an initiator. The graft degree of MAH was confirmed by the existence of carbonyl group (C=O) stretching peak at $3100cm^{-1}$ of FTIR spectrum. Thermal properties of MAH-g-PP and PP/MAH-g-PP/pulp composites were investigated by DSC and TGA. There was no district change in thermal properties of PP/MAH-g-PP/pulp composites. Based on tensile properties and SEM pictures for fractured surface of PP/MAH-g-PP/pulp composites, MAH-g-rPP was the best as the compatibilizer and optimum formulation was MAH content of 1.0 wt%, SM/MAH mole ratio of 1.0, and melt index (MI) of 25 g/10 min. The rheological properties of the composites were investigated by a dynamic rheometer. The complex viscosity, shear thinning effect, and water uptake incresed with pulp content.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.683-689
• /
• 2015

In this study, the properties of Ag-coated $TiO_2$ nanoparticles were observed, while varying the molar ratio of water and $Ag^+$ for the surfactant and $TiO_2$. According to the XRD results, each nanoparticle showed a distinctive diffraction pattern. The intensity of the respective peaks and the sizes of the nanoparticles increased in the order of AT1($R_1=5$)(33.3 nm), AT2($R_1=10$)(38.1 nm), AT3($R_1=20$)(45.7 nm), AT4($R_1=40$)(48.6 nm) as well as AT5($R_2=0.2$, $R_3=0.5$)(41.4 nm), AT6($R_2=0.3$, $R_3=1$)(45.1 nm), AT7($R_2=0.5$, $R_3=1.5$)(49.3 nm), AT8($R_2=0.7$, $R_3=2$)(57.2 nm), which values were consistent with the results of the UV-Vis. spectrum. The surface resistance of the conductive pastes fabricated using the prepared Ag-coated $TiO_2$ nanoparticles exhibited a range 7.0~9.0($274{\sim}328{\mu}{\Omega}/cm^2$) times that of pure silver paste(ATP)($52{\mu}{\Omega}/cm^2$).

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.951-961
• /
• 2016

To prevent increasing instances of heat-related illnesses due to heat waves generated by climate change, a customized thermal environment index should be developed for outdoor workers. In this study, we conducted sensitivity analysis of the Masan harbor during a heat wave period (August 9th to 15th, 2013) using the MENEX model with metabolic rate and clothing-insulation data, in order to obtain realistic information about the thermal environment. This study shows that accurate input data are essential to gather information for thermophysiological indices (PST, DhR, and OhR). PST is sensitive to clothing insulation as a function of clothing. OhR is more sensitive to clothing insulation during the day and to the metabolic rate at night. From these results, it appears that when exposed to high-temperature thermal environments in summer, wearing highly insulated clothing and getting enough rest (to lower the metabolic rate) can aid in preventing heat-related illnesses. Moreover, in the case of high-intensity harbor work, quantification of allowed working time (OhR) during heat waves is significant for human health sciences.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.42-42
• /
• 2011

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordants effect of Hwangsu spring were analyzed by pH, temperature, trace elements, organic matter and color fastness. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, in Yeongcheon (Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. Hwangsu spring during storage at $25^{\circ}C$ turned brown by photochemical reaction. The Result of ICP analysis, it contained Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm) and observed character by water analysis. Dyeing and post-mordant procedure; Cotton(KS K 0905) were dyed with clove powder for 30 min at $70^{\circ}C$. Hwangsu spring, Aluminium Sulfate $14-18H_20(Al_2(SO_4)_3{\cdot}14-18H_2O)$, Iron Sulfate Heptahydrate($FeSO_4{\cdot}7H_2O$) were used by post mordant at the same ratio. The dyed fabrics were treated with 20% each mordant solution at $25^{\circ}C$ for 10min. Comparison with a reproduced chemical mordant, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.