• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.25-38
• /
• 2023

Seoul Metropolitan Urban Railroad has an undecided route that does not estimate the passenger transportation route. For this reason, the fare of the urban railroad is calculated by the assumption that passengers pass through the minimum distance. Therefore, if a transfer station on the urban railroad is added, the trip shortest distance could be decreased and the fare also reduced. In this study, this phenomenon defines the fare paradox(Shin, 2022) and estimates the impact of the fare paradox by opening the GTX-A. For this purpose, a scenario before and after the opening of the GTX-A has been established, and an additional fare has been estimated by proportional planning of the Seoul Metropolitan Integrated Distance Based Fare Policy. Fare Paradox was analyzed to about 0.024 % of daily income. It is expected to be used as a plan to determine a rate policy, such as the establishment of a GTX-A, B, C, D, and a light rail line.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.907-914
• /
• 2011

It has used for Rolling Stock Maintenance a number of maintenance system applied RCM in Railway(Korea Railroad Corporation, Seoul Metro, Korail Airport Railroad Corporation, etc) so far. Some institutions has been using develop Computational System including reliability process. A majority of the system has computerized maintenance work, but it is shown that developed focus on administrator and developer not user. SMRT(Seoul Metropolitan Rapid Transit Corporation) has developed computational system for maintenance in the '90s and saved many data about Maintenance Historical Data. However, this system reached the limits application of this data. Maintenance of computer systems is managed directly by the field staff and to introduce Reliability-centered maintenance SMRT was continually reviewed system development trends and supplement the existing system. To successfully operate RCM program should be gained full support in the whole company and field communicate, secure a reliable data from field and the most important take a patience. Our corporation will operate and develop successful RCM thorough review of these problems in the future.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1070-1077
• /
• 2013

Owing to the consistent increase in energy efficiency issues, studies for improving regenerative energy utilization have been receiving attention in the Urban DC railway systems, where currently, the utilization of regenerative energy is low due to the lack of a specific plan for using this energy. The regenerative energy in railway systems has a low efficiency problem which results in the increase of the catenary voltage and a possibility to create problems to the electrical devices connected to the system. This paper deals with the power integration of large urban railway subsystems to improve regenerative energy utilization where the railway subsystems are integrated with other railway subsystems to improve the energy efficiency. Through the case studies, to find the realistic effect of integrated operation, the Seoul Metro subsystems, namely Line 5 and Line 7, has been applied. Also, evaluation for the electricity cost saving has been performed by using KEPCO electricity cost table.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1999-2004
• /
• 2008

This study is about to constructing BOM for managing and integrating information, which is drawing, technical data, attribution, design, ordering, cost, weight, process, service, etc. based on train's system, elements, substructure, assembly, components, parts during whole train's lifetime of the next generation. The BOM is the mostly basic structure information as hierarchical data what are parts consisted specific products. The BOM was utilized as essential elements for collectively managing through informing all of the business activity from ordering to supplying. The BOM in railroad is consist of two parts. One is Engineering BOM for design, the other is Production BOM for production, which are utilized in development calculating the quantity of materials. Also the Maintenance BOM is applied to suppling parts and managing malfunction in railroad corporation like the Seoul Metro. There are many kind of BOMs, because of the special character for each step. Therefore We have need to develop BOM which is able to integrate drawing, technical data for helping good circulation between RAMS applied maintenance using database and helpful know-how for development and production. Also the BOM of the next generation must be consisted regard to whole life-cycle.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.76-81
• /
• 2019

In this study, the causes of human error were identified through the survey of the drivers of the three organizations: Seoul Metro, Seoul Metropolitan Rapid Transit Corporation, and Korail. It was started with the aim of finding and eliciting causes in various directions including human factors, job factors, and environmental factors. The Cronbach alpha value was 0.95 for the reliability significance of the stress-induced factors in the operational area. The significance probability for organisational factors was shown to be 0.82, and the significance of the sub-accident experience and the driving skill factors in operation was 0.81 In addition, the analysis results showed that stress-induced in the field of driving is higher than the human factors in the reliability analysis. The results of the analysis confirmed that the reliability of the organizational and operational stress-induced factors was higher than other causes. In order to reduce urban railroad accidents, this paper suggests a method for operating safe urban railroad through the minimization human errors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.36-49
• /
• 2016

A subway system is one of the major transportation modes at a metropolitan area. When it meets the other lines, the metro station, so-called transferring station, is usually threatened by severe pedestrian congestion and safety issue of transit users including the transportation vulnerable. Although transportation planners forecast travel demand at the beginning, it is not easy to predict pedestrian flows precisely for a long term if land use plans have dramatically changed. Due to expensive costs, structural extension of metro stations is limited. Therefore, it requires efficient and technical improvements as meeting the demand of pedestrian and physical characteristics. In this study, the core mechanism of pedestrian movement-based simulation model was introduced and evacuation scenarios were analyzed with the developed model. As a result, the multiple optimal routes for unexpected events at the solid space of the multiple stories are easily searched through the simulator and in the case of Sadang Station, travel time can be reduced by 60% when the evacuation information and intuitive design are provided.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1852-1857
• /
• 2007

Since the introduction of the subway, remarkable progress has been made so as to be able to produce a Korean standard electric car, but it is rather regretful that an engineer who is not aware of laws on a railroad or involved in a railroad designed a electric car. In the future, the electric cars with up-to-date technology must be introduced, but there are many difficulties in such introduction. For example, the operation of simultaneously moving and running scores of subway trains must comply with Regulation on Railroad Train Operation, so, close examination of these problems is required. The existing electric car, as does a motorcar, varies a little with makers in the type and characteristics. This paper is intended to discuss about the device and measures for reinforcing a function of Daewoo GEC electric car that was introduced by technical tie-up from England, which accounts for the most ratio in this field

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.234-242
• /
• 2016

In express operation plans for urban trains, it is effective for the reduction of the number of sidetracks to apply a high performance train that has improved acceleration/deceleration ability and a regular train to local and express trains, respectively. In this research, based on a plan to use a high performance train for a local train, an optimization methodology is suggested to reduce the number of sidetracks and the operation time of the local train simultaneously. The optimization solver applied in this research is a genetic algorithm; headway, location of sidetrack and waiting time at the sidetrack are considered as design variables in the optimization problem. Consequently, by applying this system to Seoul metro line no.7, the effect of the suggested methodology was verified by obtaining the proper optimum solution.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.67-71
• /
• 2008

This study is to retest of seoul traffic, all sorts of statistical data, the present condition of urban railway that local government and all sorts of research institution had researched. Even though, or something else with population and regional industrial distribution of seoul with worker and the present condition of the registrated cars and the change of increase, we have predicted the medium term and long-range solution. we have proposed the alternative plan about both of the problem that is the developmental construction direction of seoul urban railway and the resource insurance for urban railway construction.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.660-665
• /
• 2011

In this paper we investigated a variety of candidate trains in KORAIL and Seoul Metro Corp. for an experimental driving which would be in the prosecution of making functional and performance experimentation for the specified manual by this project. We examined many preliminary out-of-service trains and some kinds of spare trains to secure two composition of test-trains for CBTC evaluation and studied a remaking scheme to convert control vehicles of these trains to CBTC-functioned ones to choose a most suitable ones of them, so we will be make traveling tests on the test railroad with them.