• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2017

High frequency squeal noise can be generated when a railroad vehicle runs a sharp curved section; this noise causes environmental complaints and excessive wear on the wheel and the railroad track. In this paper, curved squeal noise experiments on a commercial railway were carried out to investigate this phenomenon. The relationship of the squeal noise pressure level, the frequency characteristics, the railway running speed, and the modal behavior of the wheel were investigated. At the same time, the lateral motion of the wheel relative to the rail was captured using a video camera; wheel movement was calculated when the noise was generated. queal noise occurred at the highest level at the inner front wheel; this phenomena is considered to be related to the lateral vibration response characteristics of the wheel. It can be seen that the magnitude of this squeal noise is not directly related to the increase in vehicle speed.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.630-638
• /
• 2015

The total number of passengers on the KTX since its construction in 2004 surpassed 500 million in October, 2015. The operation of KTX made it possible to reach anywhere in a country in half a day, which subsequently altered people's lifestyle. As the KTX has become an important mode of transportation, there is a growing interest in the optimal size and location of its stations. Currently, the stations are constructed through public-private partnerships since a sufficient amount of budget is hard to secure only from the public sector; however, because railway stations are traditionally aimed at promoting public interests, an emphasis on the profitability of the private sector could compromise public interests. At this juncture, this study separately computes the number of users based on each of the two primary functions of the stations-as a railway station and as a sales facility-and estimates the numbers of people according to various transportation modes that are taken to access the stations. This estimation is applied to the case of Dongdaegu Station, which will open in 2016. Such an application helps to predict and respond to possible congestion as brought about by the expansion of the sales facility.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.189-195
• /
• 2013

Recent trains have broadband train communication networks to improve train operation safety and to provide passengers with multimedia services. Compared to glass optical fiber, plastic optical fiber (POF) has a large diameter; it also provides the good durability and maintainability necessary to railway applications. This paper suggests an All-IP broadband train communication network that connects all devices in the train through a POF interface. Performance tests according to Korean railroad standards shows that this POF interface is usable in the range of vibration and temperature conditions encountered in trains. A dedicated Layer-2 switch with the POF interface is developed for the construction of the All-IP train communication network. A prototype 1Gbps train communication network was set up in a trial-run of train on a metro line using the developed Layer-2 switch and POF. On-track tests indicated the feasibility of the POF train communication network. POF has an additional advantage of economic feasibility, and it is expected to start a trend toward broadband train communication networks using POF.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.67-79
• /
• 2017

Increasing transportation dependence on the metro system has lead to the convenience of passengers becoming as important as the transportation capacity. In this study, a pedestrian simulator has been developed that can quantitatively assess the pedestrian environment in terms of attributes such as speed and distance. The simulator consists of modules designed for 3D indoor map authoring and algorithmic pedestrian modeling. Module functions for 3D indoor map authoring include 3D spatial modeling, network generation, and evaluation of obtained results. The pedestrian modeling algorithm executes functions such as conducting a path search, allocation of users, and evaluation of level of service (LOS). The primary objective behind developing the said functions is to apply and analyze various scenarios repeatedly, such as before and after the improvement of the pedestrian environment, and to integrate the spatial information database with the dynamic information database. Furthermore, to demonstrate the practical applicability of the proposed simulator in the future, a test-bed was constructed for a currently operational metro station and the quantitative index of the proposed improvement effect was calculated by analyzing the walking speed of pedestrians before and after the improvement of the passage. The possibility of database extension for further analysis has also been discussed in this study.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.364-369
• /
• 2012

This paper presents an experimental study on the radio propagation characteristics in subway tunnel at 18GHz frequency band which has been assigned to video transmission between train and wayside. The radio propagation tests are carried out in the subway tunnel of Seoul Metro using the antenna and communication devices of the prototype video transmission system. The measurement results show that 18GHz radio propagation in subway tunnel has smaller path loss than that of general outdoor radio environment. It is also cleared that the arch-type tunnels have smaller radio propagation losses than rectangular tunnels, and single track tunnels have smaller pass loss than double track tunnels. From the measurements, the radio propagation coverage is worked out as 520 meters. The curved tunnels which cannot have LOS communication between transmitter and receiver have large pass losses and fluctuation profile along distance. The radio propagation coverage along curved tunnels is worked out as 300 meters. These investigation results can be used to design the 18GHz radio transmission system for subway tunnel by providing the optimized wayside transmitter locations and handover algorithm customized to the radio propagation characteristics in subway tunnels.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.625-636
• /
• 2017

This study looked into the behavior of precast concrete track due to temperature variation and initial track deformation and examined the effect of initial deformation and deformation caused by temperature gradient on the stress distribution of slab under train load. In this paper, one of two papers in a series, a finite element analysis model for calculating deformation and stress of precast concrete track was proposed; the temperature distribution and displacements measured at the precast concrete track in the field were compared with the analytical results. The results show that the slab always curled up due to initial deformation; by comparing the measured displacements with the displacements calculated by taking measured temperatures at each depth as input, the effective built-in temperature (EBITD), the temperature difference between the top and bottom of the slab corresponding to the initial deformation, can be estimated. If EBITD is relevantly assumed, the calculated displacements correlate well with the measured ones.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2090-2100
• /
• 2011

Railway rail fastening system is the critical device which gives big influences to not only the vehicle driving stability and the orbit's structural stability against the impulsive load, but also the noise vibration and the ride comfort. As a part of the low-carbon green growth, the importance of the railroad industry is getting highlights on its excellent energy-efficiency and eco-friendliness. However, so far the Korea's domestic rail fastening system technology is not so good and the technical reliance to abroad is very heavy. In this study, we conducted comparative analysis on the rail fastening system with new and used one of the same type. And those systems are imported by Seoul Metro and are being used by it. With this basis, we developed the components and the materials and then, established the durability assessment methods appropriate to the Korean domestic circumstances. And through the reliability qualification test on the 7 parts of the rail fastening system, we've improved the reliability and guaranteed the 15 years of service lifetime. ($B_{10}Life15$) Establishment and standardization of Reliability Standard on the parts of the rail fastening system such as anti-vibration pads, guide-plate, screw spike made it possible to perform the internationally fair assessment. And it is thought that we can satisfy the manufactures' and consumers' needs of cost-cutting and qualification security by shortening of assessment period on rail fastening system.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.397-407
• /
• 2016

This study analyzed the efficiency change and the factors affecting productivity change for the six railway operation corporations that are local public enterprises; study was performed with the DEA-CCR Model and Malmquist Productivity Index, using data collected from 2010 to 2014. Since it was not feasible to collect data on the operating expenses and the number of employees of each of the lines, the efficiencies of each operation corporation were analyzed by integrating the operation corporations, and the Malmquist Productivity Index was used to investigate the trend of the periodical productivity change. Average efficiency for urban railway operation corporations was found to be higher in the case of the bigger corporations. In 2014, the Seoul Metro and the Daejeon Metropolitan Express Transit Corporations were analyzed and found to be the most efficient operation corporations. The Malmquist Productivity Index was used to determine the periodical change; the average MPI was 1.06, with a continuous increase of productivity. The analysis showed that changes of technology were generally more obvious than change of technology efficiency for all six operation corporations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.969-975
• /
• 2015

In this paper, we review the regulations relating to railway safety and station workers interviewed, eight urban rail accidents decreased operating agencies through the prevention research currently being conducted into the (Seoul Metropolitan Rapid Transit Corporation City, Seoul Metro, Incheon traffic mortality, etc.) the root cause for the lack of aggressive prevention measures performed on the difficulties related regulations, organizational culture and work environment, prevention of negative operating authority derived in three improvements were obtained through this direction. First proposed urban railway safety ever buy Conduct production, utilization and operating agencies college safety assistant suggests directions for safety training, organizational culture and work environment improvements in senior management. Finally, active accident prevention campaigns, and provide direction to increase the educational participation of guests. Improvement for such accidents would decrease is thought to play a role in the prevention of future operating agency established when the guidelines.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2017

This study investigated the causes and problems of train operation impediments through the statistics analysis of 8 years'internal data of Daejeon Metropolitan Express Transit. By evaluating the risks regarding the system, equipment, and parts of high risk group, this study measured the Risk Index Severity, and applied the $5{\times}5$ Risk Assessment Matrix which is a method of risk management to calculate the scale of risk to analyze the safety level and allowance range. As a result, the car sector, the most serious risk, followed by machinery and equipment sector showed that the inherent risk. In particular, the door broken and the door rail signaling and control devices due to defects of the vehicle is high, but also the severity, and frequency are showing very frequent additional potential accidents. PSD also had defects in the machinery sector appeared to be the most dangerous of the PSD poor safety gates, it was found that the glass also involve the risk of mishandling and breakage of the PSD. This study intended to contribute to the transportation benefits through the safety and stable operation of Metropolitan Express Transit.