• 한국축산시설환경학회지
• /
• 제13권3호
• /
• pp.161-170
• /
• 2007

액비제조과정에 발생되는 악취물질을 감소시키기 위하여 파일럿 규모의 오존발생기를 제작하여 저장탱크에 있는 호기성 액비에 오존처리와 대조구를 두고 종자발아상태, 액비의 물질성상 변화 및 악취 저감효과를 구명하고자 본 시험을 수행하였으며 그 결과는 다음과 같다. 1. 각각의 처리에 대한 무씨의 발아성적은 오존처리구에서 발아율이 좋았다. 2. 액비저장조내의 분뇨성분 분석 결과 모든 처리구에서 pH는 상승하였고, 오존처리구는 모든 성분 함량에서 감소하는 경향을 보였다. 3. 액비저장조의 물질성상 변화에 대한 대조구와 오존처리구를 비교한 결과, 오존처리구는 대조구 보다 유기물 함량은 오존처리의 경우 1% 이하에서 검지됨에 따라 오존의 산화력이 높았고, 암모니아태 질소 함량은 대조구보다 낮은 수준에서 검지되었으며, BOD/COD 비율은 1.5 이하에서 물질성상의 변화를 호조건으로 만들어지고 있었다. 또한 부유물질(SS)의 경우 제거효과가 컸고, 총질소 함량은 대조구에 비해 낮게 검출되어 산화력이 좋은것으로 판단된다. 4. 유해가스중 Methyl isobutyl ketone만 오존의 저감효과가 있었고 공기 희석관능법에서는 대조구와 오존처리구 모두 배출구에서 500 이하로 나타나 적합하였지만 대조구 보다 오존처리구의 악취가 더 감소한 것을 알 수 있었다. 그러나 오존발생기를 이용한 오존처리농도(0.15ppm)와 액비에 오존접촉시간(15분/일)에 대한 좀 더 깊은 연구가 필요하다고 사료된다.

• 청정기술
• /
• 제27권1호
• /
• pp.79-84
• /
• 2021

본 연구에서는 도장 공정에서 사용된 폐활성탄을 원통형 카트리지에 충진하여 저온 가스에 의한 탈착 특성을 파악하였다. 폐활성탄의 탈착유량을 결정하기 위하여 활성탄의 톨루엔 흡착 및 탈착 실험을 진행하였다. 실험결과에서 1, 2, 4 ㎥ min-1의 유량으로 탈착을 하였을 때 높은 THC 농도와 탈착시간에 의하여 2 ㎥ min-1이 적절하다고 판단하였다. 폐활성탄은 탈착시간 초기에 가스성분에서 비점이 낮은 2-butanone과 MIBK (methyl isobutyl ketone)가 높은 비율로 발생되었고, 그 이후에는 THC의 농도가 감소하면서 BTX계열이 상대적으로 높은 비율로 탈착되었다. 폐활성탄의 탈착시간 동안 발생되는 가스 성분의 총 열량은 316 kcal kg-1으로 나타났다. 폐활성탄을 이용하여 톨루엔으로 5회 반복 재생한 결과에서는 요오드가 및 비표면적이 신탄에 비하여 상대적으로 낮은 것으로 분석되었다. 원통형 카트리지 2개를 직렬로 연결한 탈착실험에서는 최대 THC농도가 약 470 ppm으로 나타났다.

• 한국대기환경학회지
• /
• 제30권5호
• /
• pp.492-503
• /
• 2014

In this study, emission characteristics of volatile odorant species released from urine samples were investigated in relation to two key variables: [1] storage conditions before sampling and [2] incubation conditions during sampling. To this end, 20 offensive odorants were quantified by four different analytical systems and then sorted according to seven functional groups. It is indicated that benzene (B), styrene (S), isobutyl alcohol (i-BuAl), butyl acetate (BuAc), butyraldehyde (BA), isovaleraldehyde (IA), and valeraldehyde (VA) did not contribute to urine odor because their concentration levels were measured below detection limits in all samples. On the other hand, emission concentrations of toluene (T), methyl ethyl ketone (MEK), methyl mercaptan ($CH_3SH$), carbon disulfide ($CS_2$), and ammonia ($NH_3$) were generally higher than other compounds. In terms of odor intensity (OI), $CH_3SH$ and $NH_3$ showed the largest OI values in the range of 2~4. According to t-test (storage approach and urine temperature), the results of T, $CS_2$, and $NH_3$ were statistically distinguished from each other in terms of differences in sampling temperature. Likewise, the emissions of certain odorants from urine samples were affected by changes in sample treatment conditions to a degree.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.81-85
• /
• 1999

Tributyl phyosphate(TBP) polypropylene glycol 4000(PPG-4000) and the mixture of two compounds were examined as a liquid membrane in a supported liquid membrane (SLM) to separate phenol from aqueous solution.The feed concentration of phenol was varied in a broad range from 500 mg/L to 5000 mg/L and different types of liquid membrane were prepared to elucidate their effects on separation of phenol. It was found that the modified PPG 4000 with TBP and toluene diisocyanate(TDI) might be used as a proper liquid membrane because the mass transfer rate examined with this membrane was higher than that through methyl isobutyl ketone (MIBK) which has been used as a conventional solvent in a solvent extraction process. The breakthrough pressure of the SLM is defined to be the pressure difference across the membrane at which the supported liquid membrane is not kept in the pores any more. it indicates how the SLM is stable., It was found that the breakthrough pressure of the modified PPG-4000 was much higher than those of typical organic solvents.

• Bulletin of the Korean Chemical Society
• /
• 제23권10호
• /
• pp.1381-1391
• /
• 2002

The solvent sublation using ion pairs of metal-2-naphthoate(2-HNph) and tetrabutyl ammonium ($TBA^+$) ion has been studied for the concentration and determination of ultra trace Bi(III), In(III) and Tl(Ⅲ) ions in water samples. The partition coefficients ($K_p$) and the extraction percentages of 2-HNph and the ion pairs to methyl isobutyl ketone (MIBK) were obtained as basic data. After the ion pair $TBA^+$·M$(Nph)_4^-$ was formed in water samples, the analytes were concentrated by the solvent sublation and the elements were determined by GF-AAS. The pH of the sample solution, the amount of the ligand and counter ion added and stirring time were optimized for the efficient formation of the ion pair. The type and amount of optimum surfactant, bubbling time with nitrogen and the type of solvent were investigated for the solvent sublation as well. 10.0 mL of 0.1 M 2-HNph and 2.0 mL of 0.1 M $TBA^+$ were added to a 1.0 L sample solution at pH 5.0. After 2.0 mL of 0.2%(w/v) Triton X-100 was added, the ion pairs were extracted into 20.0 mL MIBK in a flotation cell by bubbling. The analytes were determined by a calibration curve method with measured absorbances in MIBK, and the recovery was 80-120%.

• 분석과학
• /
• 제20권1호
• /
• pp.41-48
• /
• 2007

유리소재 중의 미량의 납 및 카드뮴을 Na-DDTC를 가하여 Pb- 및 Cd-DDTC 착물을 형성시켜 유리 matrix 원소들로 부터 분리한 다음 MIBK로 추출하여 ICP-AES로 분석하였다. 유리 기질성분인 Na, Si, Mg 그리고 Ca 화합물 등은 미량의 납 및 카드뮴 정량에 방해작용을 하므로 직접 분석할 수 없으므로 용매추출법에 의해 Pb 및 Cd를 효율적으로 분리할 수 있었다. Pb 및 Cd 화합물이 첨가된 시험기준 시료와 NIST SRM 1412에 대한 용매추출실험에서 matrix의 영향을 받지 않고 정량하였다.

• 실내환경 및 냄새 학회지
• /
• 제16권1호
• /
• pp.54-63
• /
• 2017

The Automobile HVAC system is a habitat for odor-associated fungal communities. We investigated the odor-associated fungal community in an automobile HVAC system using a high-throughput DNA sequencing method. The fungal community structure was evaluated via metagenome analysis. At the phylum level, Ascomycota and Basidiomycota were detected, accounting for 43.41% and 56.49% of the fungal community in the HVAC system, respectively. Columnosphaeria (8.31%), Didymella (5.60%), Davidiella (5.50%), Microxyphium (4.24%), unclassified Pleosporales (2.90%), and Cladosporium (2.79%) were abundant at phylum of Ascomycota and Christiansenia (36.72%), Rhodotorula (10.48%), and Sporidiobolus (2.34%) were abundant at phylum of Basidiomycota. A total of 22 genera of fungi were isolated and identified from the evaporators of the HVAC systems which support fungal growth and biofilm formation. Among them, Cladosporium, Penicillium, Aspergillus, and Alternaria are the most representative odor-associated fungi in HVAC systems. They were reported to form biofilm on the surface of HVAC systems with other bacteria by hypha. In addition, they produce various mVOCs such as 3-methyl-1-butanol, acetic acid, butanoic acid, and methyl isobutyl ketone. Our findings may be useful for extending the understanding of odor-associated fungal communities in automobile HVAC systems.

• 한국식품영양학회지
• /
• 제25권4호
• /
• pp.1092-1098
• /
• 2012

바닥소재에 따른 천일염의 향기성분은 네 가지 종류의 천일염에서는 4-methyl-2-pentanone, 5-methyl-3-hexanone, 4-methyl-3-penten-2-one, 2-hexanol, benzothiazole, 2,4-bis-(1,1-dimethylethyl)-phenol, 1,3,5-tri-tert-butyl benzene 등 케톤류, 알콜류 그리고 방향족 화합물류와 같은 공통된 향기성분이 검출되었다. 친환경소금으로 알려진 토판염, 일반적으로 알려져 있는 천일염인 PVC 장판염과 그리고 친환경소재의 PP 장판염의 차이를 구별할 수 있는 향기성분은 검출되지 않았으며, 신안군에서 생산된 천일염에서만 methyl isobutyl ketone 성분이 검출되어 생산지역에 따라 차이가 있었다. 편백나무에 보관했던 천일염의 향기성분은 오동나무와 소나무에 보관했던 천일염의 향기성분보다 다양한 종류가 검출되었으며, 이는 저장용기의 나무소재에 따라 천일염에 이행된 향기성분이 다르기 때문으로 생각된다. 이와 같이 독특한 향기성분을 천일염에 부여하는 것은 천일염 산업에 새로운 고부가가치를 창출할 수 있는 방법이라 판단되며, 소금 유통시장에서 적용가능성이 높은 연구가 수반되어야 할 것이다.

• 월간산업보건
• /
• 통권8호
• /
• pp.4-30
• /
• 1988

Examination of working environments was conducted to get more detailed data about harmful working environments and to make a contribution to more effective management. Study was carried out on 722 factories located in Taegu city and eight counties in Kyungpook Province, Korea, for a period of one year, from February 1 to December 30, 1986. The total number and proportion of workers exposed to harmful material was 37,697, 45.2% among 83,368 workers. The results according to exposed material were as follows: 1. In the case of noise, proportion of exceeding the 8-hour TLV was 59%, Included were nail-cutting in assembly metal manufacturing industry and weaving process in textile. 2. Dust in mill process of coal manufacturing industries exceeded the TLV of second class of dust at all parts and exceeded the TLV at 6% as a whole.: 3. The fields of industry lower than 70 lux of illumination were storage equipment of food, auto-winder of textile, painting of wood wares and coal mixing, and 44% of all cases was lower than standard. 4. As a result of temperature index investigation(WBGT), about 12% of all sujects exceeded limit value. Included parts were rolling machine and reducing room. 5. In the case of organic solvents, TLV was exceeded at about 8%, The parts exceeded TLV according to materials belonged to this category were as follows. 1) Toluene: adhesive work in assembly metal manufacturing 2) Xylene: printing and paint mixing in chemical manufacturing 3) Methyl ethytl ketone: paint mixing in all parts examined and coating machine partially in chemical manufacturing 4) Methyl isobutyl ketone: printing in chemical manufacturing 5) Acetone: vapor polishing in assembly metal manufacturing 6. Among specified chemical materials, the concentration of HC1 in the air in metal assembly manufacturing factory exceeded TLV. in one of three assembly metal manufacturing examined. Others, such as benzene, acetic acid, formic acid, sodium hydroxide, formalin, ammonia, copper, chromate etc. were lower than TLV in its indoor atmospheric concentration. As a whole, the proportion of exceeding TLV was about 0.8% 7. The concentrations of inorganic lead were lower than TLV in all parts examined. The results of this investigation show the fact that current management of working environments is not satisfactory, and so more active management is needed.

• 한국산업보건학회지
• /
• 제3권2호
• /
• pp.177-187
• /
• 1993

The exposure levels of mixed organic solvents for 66 exposed workers in six paint manufacturing plants were evaluated. In 66 exposed workers and 30 control subjects, we also determined the concentrations of toluene and xylene metabolites, hippuric acid, ($o^-$, $m^-$, and $p^-$)methylhippuric acid. The results were as follow ; 1. Seven organic compounds, which on averge accounted for approximately 90% of the identified mass in each painting plants air samples, were selected for quantification : methyl ethyl ketone, ethyl acetate, methyl isobutyl ketone, toluene, butyl acetate, ethyl benzene, ($o^-$, $m^-$, $p^-$)xylene. 2. The average mixed organic solvent exposure levels in 66 points with workplce were 3.8ppm of MEK, 12.2ppm of ethyl acetate, 4.0ppm of MIBK, 28.7ppm of toluene, 3.8ppm of butyl acetate, 10.2ppm of ethyl benzene, 14.6ppm of xylene, respectively. 3. For the total 66 points with workplace, the rate of them of which mixed solvents in air was exceeded th TLV of 1.0 were obtained for 23%(15/66 point). 4. The concentrations of hippuric acid in urine of exposed group and control were $0.94{\pm}0.65g/g$ of creatinine, $0.16{\pm}0.11g/g$ of creatinine, respectively. 5. There was a linear correlation between the end shift hippuric acid acid levels in urine and exposed toluene in air : y=0.02079X+494.2, r=0.6488, n=55 y:hippuric acid in urine(mg/g of creatinine), x:toluene levels in air(ppb) Toluene levels of 100ppm in air have been caculated to hippuric acid of 2.57g/g of creatinine in urine. 6. There was a linear correlation between the end shift methylhippuric acid acid levels in urine and exposed xylene in air : y=0.01664X+31.6, r=0.7264, n=55 y:methylhippuric acid in urine(mg/g of crea.), x:xylene levels in air(ppb) Xylene levels of 100ppm in air have been caculated to methylhippuric acid of 1.69g/g of creatinine in urine.