• YAKHAK HOEJI
• /
• v.33 no.5
• /
• pp.290-295
• /
• 1989

2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3-carboxylic acid methyl ester (1) was formylated to 2,6-dimethy-4-(3'-nitrophenyl)-5-formyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (2) in 76% yield. At the elevated temperature, 2,6-dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-monomethyl ester (3) was also converted into compound 2 in 46% yield. The compound 2 was reduced to 2,6-dimethyl-4-(3'-nitrophenyl)-5-hydroxymethyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (4) in 91% yield. Compound 2 was reacted with triethyl phosphonoacetate to give 2,6-dimethyl-4-(3'-nitrophenyl)-5-(2-ethoxycarbonyl ethenyl)-1,4-dihydropyridine-3-carboxylic acid methyl ester (5) in 50% yield. Reaction between compound 2 and amines (methyl amine, ethylamine, methoxylamine, hydroxyl amine, phenyl hydrazine and 1-amino-4-methyl piperazine) gave six schiff bases 7a, 7b, 7c, 7e, 7f in 81%, 91%, 82%, 81%, 50% and 84% yield, respectively.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.532-535
• /
• 2009

In this study, the fatty acid methyl ester was prepared from the vegetable oil by inducing ultrasound energy. The ultrasound energy was applied to the esterification reaction for heating and stirring effects. Ultrasonic induction results in the shortened reaction time and brings the increase of the methyl ester yield. However, the continuous introduction of ultrasound during the esterification reaction results in temperature increase, then the over-heating of reaction temperature was ineffective. Therefore, the system temperature was controlled at constant temperature state with the cooling circulation. The ultrasound induction reaction had the fatty acid methyl ester yield of 93% at the reaction time was 30 minutes, faster than the traditional esterification process.

• YAKHAK HOEJI
• /
• v.33 no.4
• /
• pp.219-225
• /
• 1989

2,6-dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-methyl 5-(2'-methylthio)ethyl ester methyl iodide salt (7a) was hydrolyzed by treatment with NaOH in aquous EtOH solution to give 2,6-dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid mono methyl ester (2b) in 88% yield. By the same procedure, 2,6-dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridinine-3,5-dicarboxylic acid 3-mono isopropyl ester (2c), 2,6-dimethyl-4-(2'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-mono methyl ester (2d), 2,6-dimethyl-4-(2',3'-dichlorophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-mono methyl ester (2e) and 2,6-dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridin-3,5-dicarboxylic acid (2f) were obtained from the methyl iodide salts in 91-98% yield.

• YAKHAK HOEJI
• /
• v.33 no.5
• /
• pp.280-284
• /
• 1989

When 2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-mono methyl ester(3) was reacted with dimethyl methylene ammonium chloride (5a) and $K_2CO_3$ in DMF, 2,6-dimethyl-4-(3'-nitrophenyl)-5-(N,N-dimethylamino)methyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (6a) was obtained in 41% yield. As the same procedure with compound (3) and the other dialkylaminomethylating reagents (5b, c, d, e), 2,6-dimethyl-4-(3'-nitrophenyl)-5-(N,N-diethylamino)methyl-1,4-dihydropyridine-3-carboxylic acid methylester(6b), 2,6-dimethyl-4-(3'-nitrophenyl)-5-(1'-pyrrolidinyl)methyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (6c), 2,6-dimethyl-4-(3'-nitrophenyl)-5-(1'-piperidinyl)methyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (6d) and 2,6-dimethyl-4-(3'-nitrophenyl)-5-(1'-morpholinyl)methyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (6e) were obtained in 28%, 49%, 48% and 18% yield respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.275-280
• /
• 2018

Methyl ester derived from coconut oil is very interesting to study since it contains free-fatty acid with chemical structure of medium carbon chain ($C_{12}-C_{14}$), so the methyl ester obtained from its part can be a biodiesel and another partially into biokerosene. The use of heterogeneous catalysts in the production of methyl ester requires severe conditions (high pressure and high temperature), while at low temperature and atmospheric conditions, yield of methyl ester is relatively very low. By using microwave irradiation trans-esterification reaction with heterogeneous catalysts, it is expected to be much faster and can give higher yields. Therefore, we studied the production of methyl ester from coconut oil using CaO catalyst assisted by microwave. Our aim was to find a kinetic model of methyl ester production through a transesterification process from coconut oil assisted by microwave using heterogeneous CaO catalyst. The experimental apparatus consisted of a batch reactor placed in a microwave oven equipped with a condenser, stirrer and temperature controllers. Batch process was conducted at atmospheric pressure with a variation of CaO catalyst concentration (0.5; 1.0; 1.5; 2.0, 2.5%) and microwave power (100, 264 and 400 W). In general, the production process of methyl esters by heterogeneous catalyst will obtain three layers, wherein the first layer is the product of methyl ester, the second layer is glycerol and the third layer is the catalyst. The experimental results show that the yield of methyl ester increases along with the increase of microwave power, catalyst concentration and reaction time. Kinetic model of methyl ester production can be represented by the following equation: $-r_{TG}=1.7{\cdot}10^6{_e}{\frac{-43.86}{RT}}C_{TG}$.

• Environmental Engineering Research
• /
• v.15 no.3
• /
• pp.129-134
• /
• 2010

The optimization of experimental parameters, such as catalyst type, catalyst concentration, molar ratio of alcohol to oil and reaction temperature, on the transesterification for the production of rapeseed methyl ester has been studied. The Taguchi approach (Taguchi method) was adopted as the experimental design methodology, which was adequate for understanding the effects of the control parameters and to optimize the experimental conditions from a limited number of experiments. The optimal experimental conditions obtained from this study were potassium hydroxide as the catalyst, at a concentration of 1.5 wt %, and a reaction temperature of $60^{\circ}C$. According to Taguchi method, the catalyst concentration played the most important role in the yield of rapeseed methyl ester. Finally, the yield of rapeseed methyl ester was improved to 96.7% with the by optimal conditions of the control parameters which were obtained by Taguchi method.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.269-273
• /
• 1997

This research aims at developing a new plant growth inhibitors related to abscisic acid by means of esterification of (S)-(+)-ABA with p-hydroxy methyl cinnamate and umbelliferone, and testing its biological activity on growth of rice seedlings. The over-all yield of ABA-methyl cinnamate(AC) and ABA-umbelliferone(AC) ester compounds were 83% and 78%, respectively. The growth inhibition activity of these synthetic compounds were shown about 3 to 10 times(AC) and 10 to 30 times(AU) higher than (S)-(+)-ABA.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.135-137
• /
• 1999

For the synthesis of new anti-inflammatory agents as indol derivatives, we have synthesized ${\alpha}$-benzoyl-1-ethyl-1,3,4,9-tetrahydro-8-ethyl-9-(N-benzoyl)pyrano[3,4-b]indole-1-acetic acid methyl ester. It was a new method for ${\alpha}$-substituted etodolac carboxylic acid. The synthetic process was composed of four steps, and 7-ethylindole and oxalyl chloride were used as starting materials. The third step, cyclization was carried out by addition of borontrifluoride diethyl etherate in 66% yield. The step of reduction and cyclization were simplified successfully. The final product, ${\alpha}$-benzoyl-1-ethyl-1,3,4,9-tetrahydro-8-ethyl-9-(N-benzoyl)pyrano[3,4-b]indole-1-acetic acid methyl ester was obtained in 66% yield by the reaction of methyl 1,8-dimethyl-1,3,4,9-tetrahydropyrano[3,4-b]indole-1-acetate (etodollic acid methyl ester) and benzoyl chloride.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.132-138
• /
• 2019

In this study, we demonstrate the effects of the acidic properties of montmorillonite (MMT), which is commonly used as a catalyst, on the conversion and selectivity of the dimer acid methyl ester (DAME) synthesis. We synthesize DAME by the dimerization of conjugated linoleic acid methyl ester (CLAME) and oleic acid methyl ester using MMT KSF. Incidentally, trimer acid methyl ester was formed as a by-product during the DAME synthesis. There is a necessity to adequately adjust the strength and quantity of the acid site to control the selectivity of DAME. Therefore, we vary the pH of the MMT acid by using various metal hydroxides. The purpose of this study is to increase the yield of monocyclic dimer acid methyl ester, which is a substance with adequate physical properties for industrial applications (e.g., lubricant and adhesive, etc.), using a heterogeneous catalyst. We report the dimerization of fatty acid methyl ester by using base treated-KSF, and apply it to conjugated soybean oil methyl ester. Then, we transmute the acid site properties of KSF, such as pH of 5 wt.% slurry KSF and various alkali metals (Li, Na, K, Ca). Characterization of base treated-KSF using a pH meter, x-ray diffraction, inductively coupled plasma-atomic emission spectrometer, Brunauer-Emmett-Teller surface analysis, and temperature-programmed desorption. We conduct an analysis of CLAME and DAME using nuclear magnetic resonance spectroscopy, gas chromatography, and gel permeation chromatography. Through these experiments, we demonstrate the effects of the acidic properties of KSF on the conversion and selectivity of the DAME synthesis, and evaluate its industrial potential by application to waste vegetable oil.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.621-634
• /
• 2001

The characteristics of enzymatic methanolysis of castor oil were investigated as a clean technology. Among 16 lipases tested in this study, Novozym 435 showed the highest activity in methanolysis. Solvents had different effects on the methanolysis of castor oil according to weight percent (wt%) of Novozym 435. Heptane showed best activity with 1 wt% of Novozym 435, while isopropyl ether gave the best yield of ricinoleic acid methyl ester with 0.5 wt% of that. Ricinoleic acid methyl ester was obtained in 86% of yield through the methanolysis of castor oil catalyzed by Novozym 435 (1.0 wt%) during 24hr.