• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.2
• /
• pp.127-132
• /
• 2005

Beginning the use of medical order with color contact lens, recently the color contact lens wearer increases for cosmetic order in the world. The marufacture of color contact lenses was the pigment application method, the pigment inlay method, the sandwich method, the vinding method, and so on. Now in domestic, the main use of manufacture has been the binding method. In the point of the use and manufacture of the color contact lenses, the classification of color contact lenses was the tinted and the cosmetic types. However the generally coloring of color contact lenses was the stain-method and the staining was marufactured by the thin film methods.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.86-91
• /
• 2016

This paper is concerned chiefly with the method of porous foam manufacture using basalt stone powder sludge. The hydrogen peroxide($H_2O_2$) of bloating agent has lots of problems to manufacture porous lightweight aggregate due to fast reaction rate with cement or calcium hydroxide($Ca(OH)_2$). The $H_2O_2$ injecting method using nozzle for manufacturing porous lightweight aggregate is proposed, in this study. This method is to inject $H_2O_2$ at the pressure of 10 MPa on upper side of slurry mixing materials such as stone powder sludge and quick-lime(CaO) by injector. The specimen was dried in furnace at $100^{\circ}C$ for 1 hour and cured at ambient temperature for 30 days. We analyzed the characteristics including specific gravity and water absorption. The experiments were found that the porous foam has low specific gravity, high water absorption and uniform distribution of porous more than manufactured foam by general bloating methods.

• Korean Journal of Occupational Health Nursing
• /
• v.25 no.4
• /
• pp.384-393
• /
• 2016

Purpose: The purpose of this study was to examine the effectiveness of Participatory Action-Oriented Training (PAOT) programs in korean manufacture workers with metabolic syndrome for three years. Methods: A total of 890 workers with risks of metabolic syndrome were recruited from one workplace. The experimental group (n=51) received PAOT program for the preventive management on metabolic syndrome, while the control group (n=51) received conventional program. Results: In the experimental group who participated in PAOT program, percentage of achieved action plans was 73.4% at three months, 75.8% at six months, 82.8% at three years. After three years, the rate of risk factor in the experimental group has significantly decreased from $1.94{\pm}1.77$ to $0.76{\pm}1.25$ for moderate exercise, and from $1.72{\pm}2.01$ to $1.04{\pm}1.59$ for the strenuous exercise. Systolic and diastolic blood pressure has significantly decreased from $125.06{\pm}11.83$ to $117.65{\pm}19.94$, from $83.45{\pm}13.38$ to $76.39{\pm}8.09$ mmHg. In addition, risk factor score also decreased from $3.31{\pm}0.61$ to $1.41{\pm}0.89$. Conclusion: To improve the effectiveness of PAOT program for the management of risk factors of metabolic syndrome, there is a need to continue implement programs and analyze the long-term effects are required in the workplace.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.171-174
• /
• 1994

To reduce the size of structural members, high strength concrete has recently been utilized for structure such as ultra-high-rise buildings and prestressed concrete bridges in North America, and its compressive strength has gone up to 1300kg/$\textrm{cm}^2$. In Japan, research on high-strength concrete has been undertaken on a large scale by the national enterprise so-called New RC Project. And high-strength concrete with a design compressive strength over 450kg/$\textrm{cm}^2$ has recently been employed for high rised reinforced concrete building. As a result of the serious land availability situation of metropolitan areas in the world, buildings will become taller, and even higher strengths will be required. In the future, the utilization of high-strength concrete will spread widely through the development of new structural concepts, application of steels of a higher yield stress, silica fume, and other new materials. Considering these circumstance, the aim of this experimental study is to develop ultra-high-strength concrete with compressive strength over 1800kg/$\textrm{cm}^2$ with domestic current materials. There are so many factors which influence the manufacturing of ultra-high-strength concrete. The experimental factors selected in this study are mixing methods, curing methods, water-binder ratio, maximum size of coarse by silica fume. The results of this experimental study show that it is possible to develop the ultra-high-strength concrete with compressive strength over 1700kg/$\textrm{cm}^2$ at 28days, 1800kg/$\textrm{cm}^2$ at 56 days.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.3
• /
• pp.175-186
• /
• 2004

The “Jeungbosallimgyeongje” was literature reviewed about the manufacture of Korean sauces. Furthermore, in order to investigate the changes made by time period, other literatures, “Eumsigdimibang(1670s)”, “Sallimgyeongje(1715)”, “Gyuhapchongseo(1815)” and “Choson­mussangyorijebeop(1930)”, were compared. The ingredients mentioned included soy beans, flour, barley, elm trees, red beans and blue beans, etc. In addition, the shapes and sizes of dried soybean paste brick were varied. “Manchojang”, which designated the kind of hot pepper paste, appeared in this book for the first time. During its manufacturing process, it was characteristic to add dried bean paste, sea kelp and fish to produce a novel and higher quality product. From the above mentioned books, we found out that Koreans used only the soybeans and Chinese a mixture of buckwheat, flour and barley in addition to soybeans to make their traditional sauces. According to the“ Gyuhapchongseo” , there was a slight difference in ingredients to add for the manufacture of fish sauce, but the manufacturing methods and the one year period needed for maturing the ingredients were the same.. However, in the “Chosonmussangsinsikyrijebop”, fish sauce and meat sauce were classified separately and their manufacturing methods were different as well. In conclusion, the ingredients of used for the sauces recorded in “Jeungbosallimgyeongje” were various and at first hot pepper sauce made from “Manchojang” appeared and additionally red peppers were added to five kinds of Korean paste and red pepper powder were added to two kinds of Korean paste. The manufacturing method of the sauces changed according to time period, for example, only soybean has been used in Korean traditional sauces and other ingredients used as for Chinese ones eventually disappeared.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.398-422
• /
• 2017

Objectives: The major aim of this study is to construct the database of retrospective exposure assessment for crystalline silica through reviews of literatures in South Korea. Methods: Airborne concentrations of crystalline silica were collected using an academic information search engine, Research Information Service System(RISS), operated by the Korea Education & Research Information Service(KERIS). The key words used for the literature search were 'silica', 'crystalline silica', 'cristobalite', 'quartz' and 'tridymite'. A total number of 18 published documents with the information of crystalline silica level in air or bulk samples were selected and used to estimate retrospective exposures to crystalline silica. Weighted arithmetic mean(WAM) calculated across studies was summarized by industry type. Industries were classified according to Korea Standard Industrial Classification(KSIC) using information provided in the literature. Results: A total of 2,131 individual air sampling data measured from 1987 to 2012 were compiled. Compiled individual measurement data consisted of 827 respirable crystalline silica (RCS), 31 total crystalline silica(TCS), 24 crystalline silica(CS), 778 respirable dust(RD) and 471 total dust(TD). Most of RCS measurements(68.9%) were collected from 'cast of metals(KSIC 243)'. Comparing industry types, 'mining coal and lignite(KISC 051)' showed the highest WAM concentration of RCS, $0.14mg/m^3$, followed by $0.11mg/m^3$ of 'manufacture of other non-metallic mineral products(KSIC 239)', $0.108mg/m^3$ of 'manufacture of ceramic ware(KSIC 232)', $0.098mg/m^3$ of 'heavy construction(KSIC 412)' and $0.062mg/m^3$ of 'cast of metals(KSIC 243)'. In terms of crystalline silica contents in airborne dust, 'manufacture of other non-metallic mineral products(KSIC 239)' showed the highest value of 7.3%(wt/wt), followed by 6.8% of 'manufacture of ceramic ware(KSIC 232)', 5.8% of 'mining of iron ores(KSIC 061)', 4.9% of 'cast of metals(KSIC 243)' and 4.5% of 'heavy construction(KSIC 412)'. WAM concentrations of RCS had no consistent trends over time from 1994 ($0.26mg/m^3$) to 2012 ($0.12mg/m^3$). Conclusion: The data set related RCS exposure level by industries can be used to determine not only the possibility of retrospective exposure to RCS, but also to evaluate the level of quantitative retrospective exposure to RCS.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.434-434
• /
• 2000

It is the main problem to measure the position and orientation of a robot end effector for the calibration of robots. The calibration methods can be used as a tool to improve the accuracy of robots without change of the arm or control architecture of robots. But such calibration methods require the accurate measurements. Dynamic measurement of position and orientation Provides a solution of this problem and improves dynamic accuracy by dynamic calibration o( robots. This paper describes the development o( the laser tracking system capable of determining the static and dynamic performance of industrial robots. The structure and system components are presented and basic experimental results are included to demonstrate the instrument performance. The system can be applied to the remote controlled mobile robots as weil as the calibration of robots.

• Journal of Korean Society for Quality Management
• /
• v.38 no.1
• /
• pp.96-100
• /
• 2010

The shelf-life of pharmaceutical products is the time that the average product characteristic remains within an approved specification after manufacture. Since the true shelf-life of a drug product is typically unknown, it has to be estimated based on assay results of the drug characteristic from a stability study usually conducted during the process of drug development. The nonparametric statistical methods of assessing the shelf-life of drug are considered with the current FDA regulations. Some simulation studies of nonparametric methods are also presented with the discussion.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.10
• /
• pp.44-51
• /
• 2006

According to global trend of the expanding need of high-quality automobiles, the usage of small precise worm consisting of gearing part for motors to actuate convenience modules has increased rapidly. Precision of those worms has very sensitive characteristic to motor performance and noise. Forming process has been generally used to manufacture worms because of its mass productivity. However, it has problems such as deformation due to residual stress and wear of dies. Planetary milling and side milling are among alternatives using cutting tools. To overcome those problems the two machining methods have some contrast features in the sense of tool numbers and cutting mechanism. In this paper, machinability of both methods was compared in terms of cutting force, precision and cycle time.