Browse > Article
http://dx.doi.org/10.9726/kspse.2016.20.5.086

A Study on Bloating of Porous Foam by Pressure Infiltration with H2O2  

Kim, Gui-Shik (Major of Mechanical Engineering, Jeju National University)
Jeong, Ji-Hyun (Major of Mechanical Engineering, Jeju National University)
Publication Information
Journal of Power System Engineering / v.20, no.5, 2016 , pp. 86-91 More about this Journal
Abstract
This paper is concerned chiefly with the method of porous foam manufacture using basalt stone powder sludge. The hydrogen peroxide($H_2O_2$) of bloating agent has lots of problems to manufacture porous lightweight aggregate due to fast reaction rate with cement or calcium hydroxide($Ca(OH)_2$). The $H_2O_2$ injecting method using nozzle for manufacturing porous lightweight aggregate is proposed, in this study. This method is to inject $H_2O_2$ at the pressure of 10 MPa on upper side of slurry mixing materials such as stone powder sludge and quick-lime(CaO) by injector. The specimen was dried in furnace at $100^{\circ}C$ for 1 hour and cured at ambient temperature for 30 days. We analyzed the characteristics including specific gravity and water absorption. The experiments were found that the porous foam has low specific gravity, high water absorption and uniform distribution of porous more than manufactured foam by general bloating methods.
Keywords
Basalt; Stone Sludge; Bloating; Lightweight Aggregate; Injecting method;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 X. Wang, Y. Jin, Z. Wang, Y. Nie, Q. Huang and Q. Wang, 2009, "Development of Lightweight Aggregate from Dry Dewage Sludge and Coal Ash", Waste Management, 29, pp. 1330-1335.   DOI
2 S. C. Yoon, 2008, "t도 Comparison on Code of Lightweight Aggregate in the Inside and Outside Country", International Symposium on Architectural Interchanges in Asia, Vol. 2, pp. 924-929.
3 N. Almeida, F. Branco, J. d. Brito and J. R. Santos, 2007, "High-performance Concrete with recycled Stone Slurry", Cement and Concrete Research 37, pp. 210-220.   DOI
4 J. M. Kim, C. H. Gug and S. G. Park, 2009, "An Experimental Study on the Pore Structure and Thermal Properties of Lightweight Foamed Concrete by Foaming Agent Type", The Korea Institute of Building Construction, Vol. 9, No. 4, pp. 63-73.
5 J. H. Ahn, 2011, "Physical Properties of Foamed Concrete Using Hydrogen Peroxide and Manganese Dioxide", Ph. D. Dissertation, Department of Architectural Engineering, Kyungpook National University, Korea.
6 G. S. Kim, H. K. Kim and J. H. Jeong, 2012, "A Study on Bloating of Porous Ceramic", Journal of the Korean Society for Power System Engineering, Vol. 17, No. 2, pp. 108-113.
7 G. S. Kim, J. Y. Kim and J. H. Jeong, 2014, "Development of Non-Sintered Ceramic Containing Basalt Powder", Journal of the Korean Society for Power System Engineering, Vol. 18, No. 2, pp. 93-99.   DOI
8 G. S. Kim, H. K. Kim and J. H. Jeong, 2012, "A Study on Artificial Stone Manufacture with Wast Stone and Waste Stone Sludge of Basalt", Research Institute of Advanced Technology Jeju National University, No. 23, pp. 43-52.