• Childhood Kidney Diseases
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2003

Purpose : Focal segmental glomerulosclerosis(FSGS) is known to have a poor prognosis and a poor response to treatment. We performed a combination therapy of plasmapheresis, steroid pulse and immunoglobulin in 4 patients with relapsed steroid dependent(SD) or steroid resistant(SR) FSGS after steroid pulse therapy. Materials and Methods : 8 cycles of plasmapheresis were performed in 4 patients with biopsy proven FSGS who had relapsed after steroid pulse therapy from March 1988 to July 2002. Clinical findings and treatment courses were reviewed retrospectively. Results : Among the 4 patients, there were 3 males and 1 female. After 8 cycles of plasmapheresis, clinical remissions were obtained. Two of the four patients had two relapses and received 2 more cycles of plasmapheresis which resulted in remissions. One of these patients had two further relapses and was treated with oral steroid resulting in clinical remission. Three patients have maintained normal serum creatinine level and glomerular filtration rates during the follow-up period of 10 years, and the other 1 patient for 5 months. Conclusion : A combination therapy of plasmapheresis, steroid pulse and immunoglobulin led to a complete remission in patients with FSGS who were SD or SR and was effective in maintaining normal renal function.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.431-432
• /
• 2012

In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.6
• /
• pp.1061-1071
• /
• 2010

Objectives : The purpose of this study is to train talents with high quality in dental hygienists by suggesting problems and proposing basic data available for applying to development in dental hygiene curriculum, through analyzing contents of dental hygiene curriculum. Methods : To analyze curriculum of educational institutions for dental hygienists between America and Korea, it utilized materials that were notified on each university homepage, analyzed documents, analyzed curricular content analysis, comparatively analyzed America's ASDHEP field, and comparatively analyzed Biomedical Science field, dentistry field, prevention and public field, clinical dental hygiene field, integrated curriculum, and teaching course between domestic university and American university. Results : 1. The basic field of ASDHEP was indicated the average credit in 28.6 for 4-year university with establishment and the average credit in 26.9 for 3-year university with establishment. The curricular subject field of ASDHEP except the basic field was indicated the average credit in 29.45 for 4-year university with establishment and the average credit in 30.68 for 3-year university with establishment. The prevention and public field by university was indicated the totally average credit in 27.5 for 4-year university and in 26.2 for 3-year university. The clinical dental hygiene field by university was indicated the totally average credit in 27.5 for 4-year university and in 35.0 for 3-year university. The integrated curriculum was indicated to be established dental hygiene practice(3 universities), dental clinics practice for Dept. of clinical dental hygiene(2 universities), and comprehensive dental hygiene practice(1 university) for 4-year university, and to be established clinical dental hygiene(2 universities), comprehensive dental hygiene practice, dental hygiene practice, and dental clinics practice(1 university, respectively) for 3-year university. Comparing the teaching courses by university, they were established diversely from 8 credits to 2 credits. Conclusions : Seeing the above findings, a plan for dental hygiene curriculum needs to be continuously developed so that dental hygienists can enter upon a professional career. Development in the international standard curriculum proper for global era is considered to be desperately needed.

• Journal of Engineering Education Research
• /
• v.13 no.6
• /
• pp.33-48
• /
• 2010

This paper is aimed to design for qualification structure and criteria for preparation of qualification test of the environmental impact assessor qualifications. In this study, a DACUM(Development A curriculum) method job analysis to extract contents such as task range, eligibility, examination standards, selection criteria of examination questions, examination methods, etc was done by an job analysis committee composed of 9 specialists in the industry and academia. In the first place, this report presents job analysis models by procedures for developing selection criteria of examination questions of the environmental impact assessor. The first step is preparation for job analysis(data research, interviews and selection of experts), the second step the establishment of job models(first expert council and site study), the third step the drawn-out of knowledge, skills, and tools(the second expert council and site study), the fourth step the selection of courses and an examination subject(the third expert council), the fifth step the establishment of guidelines for making questions(the third site study).

• Journal of Engineering Education Research
• /
• v.16 no.5
• /
• pp.43-52
• /
• 2013

We surveyed perceptions of faculty, students, and enterprisers in engineering about gender issue in engineering. A total of 59 faculty members, 335 students (226 male, 109 female) of Korea National University of Transportation, and 28 employers of Chungbuk location were selected. The 25 survey questions for faculty, 30 for students, and 5 for employers were made. The analysis methods used included ${\chi}^2$ for cross analysis method. The results showed that faculty in general perceived differences between genders. They also perceived that women engineering students has a lack of leadership and low possibility of success in career in engineering. Also, they perceived disadvantages in application processes of women students. However, they expressed they did not reflect those factors in teaching and career advices. Women engineering majors showed low confidence in getting a job and success in career. They also thought they had no opportunities to gender-sensitive education in engineering courses. They were also very negative toward aptitude in engineering. These results were very similar to those of faculty. On the other hand, men students showed very low awareness of their women peers' perceptions. The perception of enterprisers was also different from faculty and students. These results indicate that there should be changes in perceptions of faculty and students in engineering for employments. For better education for women engineering majors, further research is needed.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.3
• /
• pp.341-351
• /
• 2016

The purpose of this study is to investigate the effects of pre-service teachers of elementary school who take courses in 'Science and Textbook Research' on science teaching efficacy and science knowledge after experimental treatment. For this purpose, this study was aimed at intensive course four classes (118 students) enrolled in the 'Science and Textbook Research' course and experimented from the beginning of September to the end of November. The experiment was about teaching textbooks and teaching methods for one semester, and the pre- service teachers of elementary school made the demonstration of science cooperation classes by group. The results and analysis of the study were analyzed by the corresponding sample test in before and after the group test. The conclusion of the study is as follows. First, after taking this class the pre - service teachers of elementary school were effective in science teaching efficacy. Second, after taking this course, pre-service teachers of elementary school were effective in acquiring science knowledge. Third, it was seemed to positive effect on Perception of pre-service teachers of elementary school in Demonstration classes. Pre-service teachers of elementary school have created science course plan by analyzing the tasks according to the principles of instructional design, and they found that they had the right mind and confidence in the lesson.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.78-89
• /
• 2009

Overall 25~30 new golf courses are opening in Korea these days, and total annual rounds have been also increasing by 10~15% every year. The Korean golf industry is being recognized as the largest growing golf industry in the world. However, it is easily defined that there are many problems of golf course development and construction methods such as construction fees. The average construction cost for golf course development and golf course maintenance fees in Korea are much more than the cost in the USA and other countries. It may be due to the fact that USA golf course development is managed by a highly developed construction method and well trained specialists. This study will be concentrated on one of the major differences, which is about cart path material; this causes a big difference of construction and maintenance fees. In order to overcome this study, concrete and asphalt will be specified as the main cart path material. Also, some case studies and construction regulations of golf course development in the USA will be introduced for a better understanding of this study.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.5 no.2
• /
• pp.99-105
• /
• 2007

Purpose: Pyrethroid is an insecticide that produces moderate intoxication in mammals, with neither exposure to skin nor inhalation resulting in severe systemic manifestations. In 2005 we made a nationwide survey of agrichemical human intoxication. The object of this study is to analyze pyrethroid intoxications based on the 2005 survey. Methods: We prospectively collected data from 1 August 2005 to 31 July 2006 by a standard investigation protocol. We analyzed demographic data, exposure data (cause, amount, ingredients), clinical features, and courses. Results: A total of 125 cases of pyrethroid intoxication were surveyed. The mean patient age was $56.78{\pm}16.158$ years old, and the mean amount ingested was $121.85{\pm}110.732ml$. Patients were classified into four severity groups according to symptoms and mental status: the asymptomatic group (27 patients, 21.6%), the mild symptom group (48, 38.4%), the moderate symptom group (21, 16.8%), and the severe symptom group (7, 5.6%). There were statistically significant differences in mental status, severity, and mean ICU days between two groups. Admission days by severity grade for the asymptomatic, mild, moderate, and severe symptom groups were $5.49{\pm}16.051,\;3.65{\pm}4.143,\;4.59{\pm}3.335,\;and\;8.14{\pm}7.199days$, respectively (p=0.047). Conclusion: Nationwide surveillance was extremely telling in uncovering a high frequency of agrichemical intoxication in Korea. In pyrethroid intoxication, severity grading can be a useful prognostic tool.

• Journal of Korean Library and Information Science Society
• /
• v.51 no.3
• /
• pp.325-350
• /
• 2020

For University students, reading is one of the important way of character education and career education that can give students the power to recognize and adapt to changes in society. The university supports the reading activities of university students in various ways, such as opening liberal arts courses related to reading or setting up required credits. In addition, it supports activities such as selecting the recommended book list for university students and providing the list. The purpose of this study is to analyze the problems of the current university's recommended book list and methods of using reading, and to propose improvement plans. To this end, using D University as an example, the current status of the recommended book list and reading discussion program were identified, and problems were investigated. In the current recommended book list, the subject area and list did not properly reflect the times, and the information on the provided list was very simple. Also, it was found that there was no suggestion on how to use the recommended book list. Through this, the recommended book list with the addition of bibliographic information and composition of the subject area was proposed. In addition, the reading discussion method was structured using Havruta.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.862-870
• /
• 1996

Background : Multidrug-resistant tuberculosis(MDR-Tb) has been increased not only in Asia but also in Western society, which may cause public health problems and reduce the efficacy of treatment of tuberculosis. In Western society HIV infection is believed to do a central role in increasing incidence of MDR tuberculosis, but MDR-Tb in Korea may be somewhat different about clinical features, underlying disorders, and prognosis. Goble et al reponed that overall treatment failure rate in MDR-Tb including resistance to isoniazid(INH) and rifampin (RFP) was 44 %. The aim of this study is to find the treatment result in Korea and the factors determining the prognosis. Methods: A retrospective study of pulmonary tuberculosis cultured M. tuberculosis from sputum or bronchial washing fluid between 1986 through 1992 was conducted in the Seoul Paik Hospital, Inje University. We reviewed clinical courses of 141 patients, who had a tuberculosis with resistance to 2 or more drugs including isoniazid(INH) and rifampin(RFP). One hundred and 4 patients of 141 patients had completed treatment and followed up for more than one year. Results: Of 104 (mean age $43.6{\pm}16.7$, M: F=63 : 41) patients with sufficient follow-up data, 73(84.6%) patients responded which is defined as negative Sputum cultures for at least 3 consecutive months. Seven patients(6.7%) had a failure in negative conversion and 9(8.7%) of the patients who initially responded relapsed. Overall treatment failure rate was 15.4%, Patients who were treated for less than 12 months had a higher relapse rate(12.3%) than 18 months(4.9%). And there was a statistically significant correlation between the relapse rate and the number of drugs to which isolates wera resistant(p<0.05). Conclusion : The treatment failure rate of MDR-Tb in Korea was lower than previous studies in western Country and the major determining factor of prognosis was the number of resistant drugs to M. tuberculosis at drug sensitivity test. For reducing the relapse rate, we recommend more than 12 months of treatment for MDR tuberculosis.