• Computers and Concrete
• /
• v.7 no.3
• /
• pp.239-247
• /
• 2010

A proposed topology method is introduced to measure the air content of fresh cement paste and hardened concrete. The method takes advantage of chromatographic analysis in void areas that are highlighted using different color schemes and later calculated using built-in computer software. The air content measured by the topology method is compared with results obtained from the conventional ASTM methods. It is concluded that the proposed method is reliable, and costs less and is easier to operate compared with the ASTM methods. In addition, 3 dimensional pore models can be created using image post-processing techniques. The proposed method helps researchers in understanding the formation and existence of concrete pores. This paper reports a detailed test program demonstrating the standard operating procedure used for the proposed method and presents a comparison of results between the proposed method and conventional ASTM Specifications. It is also concluded that the air content increases with increasing size of pores and increasing percentage of coarse aggregates.

• Journal of Computing Science and Engineering
• /
• v.2 no.1
• /
• pp.26-43
• /
• 2008

We propose a new query expansion method in the extended Boolean model that improves precision without degrading recall. For improving precision, our method promotes the ranks of documents having more query terms since users typically prefer such documents. The proposed method consists of the following three steps: (1) expanding the query by adding new terms related to each term of the query, (2) further expanding the query by adding augmented terms, which are conjunctions of the terms, (3) assigning a weight on each term so that augmented terms have higher weights than the other terms. We conduct extensive experiments to show the effectiveness of the proposed method. The experimental results show that the proposed method improves precision by up to 102% for the TREC-6 data compared with the existing query expansion method using a thesaurus proposed by Kwon et al.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.12-16
• /
• 2009

This paper presents a new iterative locally one-dimensional [mite-difference time-domain(LOD-FDTD) method that has a simpler formula than the original iterative LOD-FDTD formula[l]. There are fewer arithmetic operations than in the original LOD-FDTD scheme. This leads to a reduction of CPU time compared to the original LOD-FDTD method while the new method exhibits the same numerical accuracy as the iterative ADI-FDTD scheme. The number of arithmetic operations shows that the efficiency of this method has been improved approximately 20 % over the original iterative LOD-FDTD method.

• Journal of the Korean earth science society
• /
• v.23 no.2
• /
• pp.147-153
• /
• 2002

Reasonable and reliable assessment method is one of the most important issues in science education, Partial credits method is an effective tool for assessing students' science inquiry problem solving. The purposes of this study were to classify the Problem solving types based on the analysis of the thinking Process, and how much the related science concept and the science process skills were used in solving science inquiry problems, and to describe the possibility and rationality of the assessment method that gives partial credit 128 high school seniors were selected and their answers were analyzed to identify science concepts they used to solve each problem, and the result was used as the criterion in the scientific concept test development. Also, to study the science inquiry problem solving type, 152 high school seniors were selected, and protocols were made from audio-taped data of their problem solving process through a think-aloud method and retrospective interviews. In order to get a raw data needed in statistical comparison of reliability, discrimination and the difficulty of the test and the production of the regression equation that determines the ratio of partial credit, 640 students were selected and they were given a science inquiry problem test, a science process skills test, and a scientific concept test. Research result suggested it is more reasonable and reliable to switch to the assessment method that applies partial credit to different problem solving types based on the analysis of the thinking process in problem solving process, instead of the dichotomous credit method.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.325-328
• /
• 2005

EEFLs are mostly driven by sinusoidal wave driving method although EEFLs (External Electrode Fluorescent Lamps) are driven by both sinusoidal wave and square wave. The sinusoidal driving method reduces the cost and allows more power efficiency since this driving method can reduce the voltage stress of EEFL inverter switches and achieve the soft switching of the switches. And a transformer should be used in the inverter since the high voltage should be applied to the both ends of EEFL to turn on the lamp. However, the power loss mainly occurs at the transformer in the sinusoidal wave driving method. In order to remove the transformer which makes the power loss, a new method is presented. In this paper, the square wave is applied directly to the both ends of EEFL by a proposed two-stage inverter. Moreover, the luminance and power efficiency will be compared between the common sinusoidal wave driving method and square wave driving method.

• Biomedical Science Letters
• /
• v.21 no.4
• /
• pp.227-232
• /
• 2015

Epstein-Barr virus (EBV) has a pathogenic role in several lymphomas including diffuse large B-cell lymphoma (DLBCL). In this study, we detected EBV from formalin-fixed paraffin embedded (FFPE) tissues of DLBCL patients by RT-PCR and compared the sensitivity of the RT-PCR method to in situ hybridization (ISH) method. The RNA was extracted from 91 FFPE samples with DLBCL and amplified with primers targeting EBV-encoded small RNA (EBER) by RT-PCR. When using the RT-PCR method, 13 of 91 patients (14.3%) were positive and among these 13 cases, 7 cases (7.7%) were from > 50-year-old patients that is classified as EBV positive DLBCL of the elderly. In previous results using ISH method, 3 of 91 patients (3.3%) were positive and 2 case (2.4%) were older than 50-year-old. These results indicate that RT-PCR method used in this study shows a higher sensitivity than ISH method. The ratio of male versus female among the EBV positive samples was 1.2:1 with the ratio of male higher. If RT-PCR method having high sensitivity is used simultaneously as well as the ISH method providing the information of the EBV positive cellular location, it is expected that EBV will be more accurately detected.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.161-165
• /
• 1990

An automated, simple, and reliable method was developed for determining in vitro drug release rate from transdermal delivery dosage forms. The patch is held in position in the heating block by sandwiching it between the middle plate and the bottom plate of diffusion cell. The dissolution profile of the commercially available transdermal scopolamine patch was determined over a 72-h period, and the results were compared with those obtained with other methods; paddle-over-disk method, reciprocating method, and diffusion cell method. It was demonstrated that the flow-through method is equivalent in terms of release rate profile and accumulated released drug amount over the lifetime of the dosage form tested. Also this method is simple, reliable and reproducible. Therefore, this technique can be used in a quality control for assuring product uniformity.

• Journal of applied mathematics & informatics
• /
• v.31 no.3_4
• /
• pp.499-511
• /
• 2013

In this article, Adomian decomposition method (ADM), variation iteration method(VIM) and homotopy analysis method (HAM) for solving integro-differential equation with singular kernel have been investigated. Also,we study the existence and uniqueness of solutions and the convergence of present methods. The accuracy of the proposed method are illustrated with solving some numerical examples.

• Journal of Korean Elementary Science Education
• /
• v.24 no.1
• /
• pp.9-20
• /
• 2005

The purpose of this study was to examine the effect of integrated science inquiry teaming method through literature materials on the learner's science concept formation, inquiry ability, and attitude related to science when it was applied to the unit 'The temperature of atmosphere and winds', 'The journey of water' in the 5th grade, and to find out the effect on science learning according to teaming styles. To study these subjects, 4 classes of 5th grade in J elementary school in Busan were selected. The result of this study were as follows: First, Integrated science inquiry learning method through literature materials was more effective for concept formation than conventional teaching method. In science inquiry ability, there was not significant difference at all between the comparison group and the experimental group. In attitude related to science, the experimental group showed significant difference only in the interest in occupation related to science. The visual modality learners within the experimental group showed significantly higher statistics than the other modality learners in the post-investigation into the science concept and there was significant difference between the visual and the kinesthetic modality learners in the result of post-test on science inquiry ability.

• Structural Engineering and Mechanics
• /
• v.54 no.6
• /
• pp.1045-1059
• /
• 2015

Form-finding for cable-membrane structures is a delicate operation. During the last decades, the force density method (FDM) was considered to be an efficient method to address the problem. Many researchers were devoted to improving this method and proposed many methods such as natural force density method (NFDM), improved nonlinear force density method (INFDM), et al. In this paper, a modified nonlinear force density method (MNFDM) is proposed. In this method, the stresses of membrane elements were transformed to the force-densities of cable nets by an equivalent relationship, and then they can be used as initial conditions. By comparing with the forming finding results by using the FDM, NFDM, INFDM and MNFDM, it had demonstrated that the MNFDM presented in this paper is the most efficient and precise.