• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.297-309
• /
• 2013

Iron objects become corroded at fast speed from the moment when they are excavated, so it is needed to control corrosion through processes of conservation treatment. However, re-corrosion mostly takes place in excavate iron objects, although they have already gone through the process of conservation treatment, and it is more difficult to carry out the second conservation treatment of re-corroded excavated iron objects than the first conservation treatment, and it requires a longer period of time to treat them as well. In this study, aims to discover factors of re-corrosion by scientifically analyzing corrosion products generated during the process of storage after the process of conservation treatment. The finished on conservation treatment of the iron artifacts, which were unearthed from three ancient site in Gyeongju by using the same conservation method between 2002 and 2009, re-corrosion condition observed on the packaging-iron artifacts. Focused on 9 target forged iron artifacts among them, this study analyzed the physical changes by mass measurement, naked-eye and microscopic observations and the chemical changes by SEM-EDS, XRD, IC and ICP analysis. The results show that the yellowish brown corrosion products formed on the facing surface of part dropped from the artifacts had different associated forms but acicular shape. In addition, the acicular shape became clearer as the color changed from red to yellowish brown. According to the process when the conservation treatment was completed, the mass of the artifacts increased in proportion to the corrosion products and the chloride ion ($Cl^-$) concentration had a tendency to increase relatively. ${\beta}$-FeOOH (akaganeite) was confirmed in the XRD analysis for the corrosion products of all the collected samples. As a result of ICP analysis, $Na^+$ and $Ca^{2+}$ components were confirmed.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.167-174
• /
• 2009

Recently, design technology of has been required such as catamaran yacht with high-speed according to expand a marine leisure industry. The domestic technical development for design and production of yacht is not actively than Canada, USA, Japan etc. However, with further development of yacht design & technology, it is need to develop a key technology related to increase the value of catamaran yacht. In the present paper, new guideline is suggest for catamaran yacht as like kinds of marine leisure ship in order for fundamental structure design and structural analysis for twin-hulled ship yacht and techniques for structural analysis as sea leisure ship in this research. The class of society has not been proposed formally about regulation and methodology for estimation of strength of small hight-speed craft with satisfying two conditions as noted; length less than 50meters, ratio of length to breadth less than 12. In the present study, we were adopted DNV (Yachts, Design Principles, Design Loads, Hull Structural Design) Rule and KR (FRP rule application guide) for scantling of structural members. Furthermore, ABS rule is used for structural calculation about application of loading conditions for catamaran yacht. This study can be available feedback role to manufacture of 38ft diffusion style for catamaran yacht. It is expected that this study will be a good reference in order to design of catamaran yacht with high-speed.

• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.419-433
• /
• 2021

Al-Si-Cu alloys benefit from the addition of copper for better hardness and strength through precipitation hardening, which results in remarkably strong alloys. However, the addition of copper expands the solidification range of Al-Si-Cu alloys, and due to this, these alloys become more prone to hot tearing, which is one of the most common and serious fracture phenomena encountered during solidification. The conventional evaluation method of the hot tearing properties of an alloy is a relative and qualitative analysis approach that does not provide quantitative data about this phenomenon. In the present study, the mold itself part of a device developed in Instone et al. was partially modified to obtain more reliable quantitative data pertaining to the hot tearing properties of an Al-Si-Cu casting alloy. To assess the influence of Cu element, four levels of Cu contents were tested (0.5, 1.0, 3.0, and 5.0 wt.%) in the Al-Si-Cu system alloy and the hot tearing properties were evaluated in each case. As the Cu content was increased, the hot tearing strength decreased to 2.26, 1.53, 1.18, and 1.04 MPa, respectively. At the moment hot tearing occurred, the corresponding solid fraction and solidification rate decreased at the same temperature due to the increase in the solid-liquid coexistence range as the Cu content increased. The morphology of the fracture surfaces was changed from dendrites to dendrites covered with residual liquid, and CuAl₂ phases were observed in the vicinity of hot tearing.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.133-143
• /
• 2018

Concrete filled steel tube (PCFT) piles, which compose PHC piles inside thin steel pipes, were developed to increase the flexural strength of the pile with respect to the horizontal load. In order to compare the flexural strength of PCFT pile with that of steel pipe pile, several flexural tests were performed on the PCFT and steel pipe piles with the same diameter and the P-M curves for both piles were constructed by the limit state design method. Four test piles were also installed and lateral pile load tests were performed to compare the lateral load capacities and lateral behaviors of the hybrid composite piles using PCFT piles and the existing piles such as HCP and steel pipe piles. The flexural test results showed that the flexural strength of PCFT piles was 18.7% higher than that of steel pipe piles with thickness of 12mm and the same diameter, and the mid-span deflection of piles was 50% lower than that of steel pipe piles at the same bending moment. From the P-M curves, it can be seen that the flexural strength of PCFT piles subjected to the vertical load is greater than that of steel pipe piles, but the flexural strength of PCFT piles subjected to the pullout load is lower than that of steel pipe piles. In addition, field pile load tests showed that the PCFT hybrid composite pile has 60.5% greater lateral load capacity than the HCP and 35.8% greater lateral load capacity than the steel pipe pile when the length of the upper pile in hybrid composite piles was the same.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.23-31
• /
• 2019

The design requirements of modern satellites vary depending on the purpose of operation. Like conventional medium and large-scale satellites, small satellites which operate on low orbit may also serve military purposes. As a result, there is increased demand for high-resolution photos and videos and multi-target observation becomes important. The most important design parameter for multi-target observation is the satellites' maneuverability. For increased maneuverability, the miniaturization is required to increase the stiffness of the satellite as this decreases the mass moment of inertia of the satellite. In the case of a solar panel having relatively low stiffness compared to the satellites' body, vibrations are generated when the attitude maneuver is performed, which greatly influences the image acquisition. For verification of such vibrational characteristics, the satellites is modeled as a reduced model, and experimental zig for simulating attitude maneuver is introduced. A rigidity simulator for simulating the stiffness of the satellite is also proposed. Additionally, the objective of the experimental method is to simulate the maneuvering angle of the satellite based on the winding length of the wire using a step motor, and to experimentally verify the vibration characteristics of the satellite body and the solar panel generated during the maneuvering test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.12-20
• /
• 2023

This study presents basic data on how to secure stability by analyzing the change in tensile force of steel rod and the inclination characteristics of PSC BOX in the "Temporary fixation system using internal prestressing tendon", which is mainly applied to construction of superstructures by FCM. To date, it has been difficult to confirm the changes in tension force of the steel rod and the inclination of the PSC BOX because the steel rod was installed vertically inside the pier and the PSC BOX. Therefore, measurement of the change in length of the steel rod and the displacement of PSC BOX were performed using a micro-measured FBG sensor. Comparisons of the calculated tensile force and the residual tensile force of the steel rod revealed that the safety factor decreased in all bridges. The cause was mainly identified to be the loss of tensile force in fixation~1segment, and countermeasures are suggested. The analysis of the inclination characteristics showed that the inclination increased with the segment progresses even in bridges with sufficient safety factor, and the difference before and after the segment was confirmed. In addition, the increase in inclination was related to the loss of tension force in the steel rod, and the stress on the opposite sides of the inclination was further reduced. It is believed that upward tensile force is generated in the steel rod on the opposite side of the inclined side due to the unbalanced moment, causing the difference in stress of the steel rod between the two sides.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.281-287
• /
• 2014

Objective: The objective of the study is to develop a portable assistance device to help elderly users reduce strain on the knee and leg muscle while the elderly are standing up. Background: The pose of standing up from a chair is a basic movement, but the elderly often have difficulty standing up due to their weak muscles. We focus on designing a solution that helps the elderly reduce physical problems and support them standing up. Method: This study consists of three parts. Part I explores the way to reduce the refrain of leg muscle while standing up from a chair. In the process of structural development, we found that the moment is minimized when user pushes down the armrests due to a decrease in the force acting on the center of mass. In part II, a user test of 20 participants was carried out to rank the order of comfort of two stimuli: the chair with fixed armrests and the chair with the four-link mechanism that we created-in three different ways; (1) to stand up without touching armrests, (2) to stand up by pushing down on fixed armrests, and (3) to stand up by pushing down on armrests and being supported by the mechanism. To examine the statistically significant differences among the rank means, a Friedman test was conducted. In part III, we analyze the results of the user test and interview feedbacks, focusing on establishing a design strategy from UPO and visualizing it in 1:1 scale. Results: In part I, we decided to develop the four-link mechanism. The bottom is lifted up as the link rises. In part II, based on the rank data, we empirically found that UPO was assessed as the most comfortable during the stimuli. The thigh angle is smaller and the bottom of UPO is separated from a seat. In part III, after assessing the results and feedbacks, we created a visualization strategy for UPO: light, friendly, and novel. Conclusion: The portable and non-mechanical UPO comprises a four-link system that lifts the user's hips while standing. It can help users avoid knee and leg muscle strain. Its universal design considers the elderly's difficulties. Application: In a future study, combining light and durable material in UPO is expected to increase its usability. And this study is an opportunity to design various types of standing assistance devices.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.213-224
• /
• 2014

Recently, tunnelling with TBM is getting popular for the construction of cable tunnel in urban area. Mechanized tunnelling method using shield TBM has various advantages such as minimization of ground settlement and prevention of vibration induced by blasting that should be accompanied by conventional tunnelling. In Korea, earth pressure balance (EPB) type shield TBM has been mainly used. Despite the popularity of EPB shield TBM for cable tunnel construction, study on the mechanical behavior of cable tunnel driven by shield TBM is insufficient. Especially, the effect of backfill grout injection on the behavior of cable tunnel driven by shield TBM is investigated in this study. Tunnelling with shield TBM is simulated using 3D FEM. The distance of backfill grout injection from the end of shield skin varies. Sectional forces such as axial force, shear force and bending moment are monitored. Vertical displacement at the ground surface is measured. Futhermore, the relation between volume loss and the distance of backfill grout injection from the end of skin plate is derived. Based on the stability analysis with the results obtained from the numerical analysis, the most appropriate injection distance can be obtained.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.468-475
• /
• 2019

An end-line flame arrester allows free venting in combination with flame protection for vertical vent applications. End-line flame arresters are employed in various fields, especially in shipping. In flame arresters, springs are essential parts because the spring load and the spring's elasticity determine the hood opening moment. In addition, the spring has to work under a high-temperature condition because of the burning gas flame. Therefore, it is necessary to analyze the mechanical load and elasticity of the spring when the flame starts to appear. Based on simulations of the working process of a specific end-line flame arrester, a thermal and structural analysis of the spring is performed. A three-dimensional model of a burned spring is built using computational fluid dynamics (CFD) simulation. Results of the CFD analysis are input into a finite element method simulation to analyze the spring structure. The research team focused on three cases of spring loads: 43, 93, and 56 kg, correspondingly, at 150 mm of spring deflection. Consequently, the spring load was reduced by 10 kg after 5 min under a $1,000^{\circ}C$ heat condition. The simulation results can be used to predict and estimate the spring's load and elasticity at the burning time variation. Moreover, the obtained outcome can provide the industry with references to optimize the design of the spring as well as that of the flame arrester.

• Journal of the Korean Society for information Management
• /
• v.29 no.4
• /
• pp.143-163
• /
• 2012

The dominant model of acquiring scholarly contents at academic libraries is so called big deal where libraries subscribe to a bundle of hundreds, if not thousands of journals in a multi-year contract with fixed annual rate increase. The bid deal, started in the mid-1990s, offered a number of advantages for academic libraries and their users. However, escalating prices for these packages have become a serious issue casting doubts about the sustainability of the subscription-based model. At the moment, it appears there is no viable alternative other than pay-per-view method that is being tested at some libraries. Libraries' budget situation will remain a key factor that might change the situation. Open access started in the 2000s as a vehicle to eliminate barriers to publishing and distributing peer-reviewed scholarly journal articles. Open access publishing is witnessing two-digit growth annually. Open access articles now occupy close to 20% of two major citation databases: Scopus and Web of Science. Google Scholar service, debuted in late 2004, is now a popular tool for discovering and accessing scholarly articles from a vast selection of journals around the world. There is a call for taking Google Scholar seriously as a potential replacement of library databases amid concerns regarding the quality of journals indexed, limited search capabilities vis-$\grave{a}$-vis library databases, and monopoly of public goods. Escalating budget problems, rapid growth of open access publishing and the emergence of powerful free tool, such as Google Scholar, need to be taken seriously as these forces might bring disruptive changes to the existing subscription-based model of scholarly contents at academic libraries.