• 제목/요약/키워드: method of measuring working environment

검색결과 31건 처리시간 0.031초

웨어러블 장비를 이용한 건설 근로자 근골격계 부하 측정방안 제시 (Development of Measurement Method of Musculoskeletal Load for Construction Workers using Wearable Motion Recognition Sensor)

  • 표기윤;이동민;조훈희;강경인
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 춘계 학술논문 발표대회
    • /
    • pp.123-124
    • /
    • 2019
  • In the labor-intensive construction site, potential threats of the musculoskeletal diseases mainly caused by various repetitive physical tasks, vulnerable environment, and the aging of the labor worker exist. However, quantitative measuring method of construction labor worker's work posture has not been improved yet. This study proposed musculoskeletal measuring method by using wearable motion recognition sensor for quantitative evaluation and analysis of working posture of construction workers. This method is expected to be used as a basic data for posture analysis and prevention construction safety accidents, as well as physical workload and labor productivity analysis by labor work type.

  • PDF

지중무선 시스템을 이용한 침매터널 구간 계측관리 사례연구 (Case Study of Immersed Tunnel Instrumentation Management Using Wireless System)

  • 한상욱;김병희;한병원;이계춘
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.768-773
    • /
    • 2009
  • Measuring method being applied for off-shore works is performed by using data logger or manual measuring instrument with wiring the cable connected from the sensor up to the position where measuring is allowed.(upper part of embankment or marine structure) Measuring management by using existing measuring method may be acceptable on the condition that the ground deformation volume(vertical, horizontal) is generally minimal and the site condition is good. But loss of measuring instrument, sensor cable failure or cutting is taken place frequently due to significant change of ground behavior caused by an external force change(embankment, excavation) under very soft ground condition(N value below 0-4). In case of the marine works, in particular, loss rate of measuring instrument is highly represented due to the factors of working barge anchoring, constructional interference and natural disaster. In order to solve these problems, measuring management was performed with employing underground wireless system at the immersed tunnel site. Measuring data was obtained freely under the marine environment by using underground wireless communication and cable cutting potential by ground behavior could be reduced. Measuring cost savings and its installation convenience were maximized by way of off-shore tower installation or cabling and by minimizing constructional interference of off-shore working barge. This case of measuring management was accomplished successfully.

  • PDF

건축공사의 공종별 유해요인 분석에 따른 작업환경측정 및 특수건강 진단 대상 분석에 관한 연구 (A Study Examining the Measurement of Construction Working Environment and the Target Analysis of Special Health Check for Site Workers - Based on the Analysis of Harmful Factors at Work Site -)

  • 손서형
    • 한국재난정보학회 논문집
    • /
    • 제18권2호
    • /
    • pp.386-394
    • /
    • 2022
  • 연구목적: 건축공사 시 공정별로 발생하는 각종 유해요인을 파악하여 작업환경측정 및 특수건강진단 대상이 되는 근로자들의 건강보호, 증진을 위한 방안에 대하여 알아보고자 한다. 연구방법: 공종별 유해요인분석, 유해요인에 따른 작업환경측정대상과 특수건강진단 항목을 알아볼 수 있다. 연구결과: 건축공사 12개의 공종별 유해요인을 분석하여 작업환경 측정대상과 특수건강 진단항목을 파악할 수 있었다. 결론: 각 공종별 유해요인 분석에 따라 작업환경측정 및 특수건강진단을 정기적으로 실시하므로써 건축근로자들의 직업병예방에 도움이 될 것으로 기대된다.

금형 자동측정에 의한 사상맵 생성 (A Method for Generation of Grinding Map based on Automatic Mold Measurement)

  • 정남용;조진형;오현승;이세재
    • 산업경영시스템학회지
    • /
    • 제41권4호
    • /
    • pp.248-255
    • /
    • 2018
  • Ensuring the quality of molds is one of the major issues in mass production. In general, securing the quality of the molds is achieved by repeating grinding and die spotting after machining the molds based on engineer's decision. However, this heuristic method is affected by the engineer's skill and working environment. Therefore, a lot of time and resources are needed in order to ensure quality. In this study, ensuring the quality of molds using grinding map which is generated using automatic measurement is proposed. An automatic measuring system based on CMM (Coordinate Measuring Machine) is developed for measuring the molds. This system generates the measurement path automatically using the 3D CAD model of products. CAD (ComputerAided-Design), CAM (Computer-Aided-Manufacturing), and CAQ (Computer-Aided-Quality) technology is integrated using DMIS (Dimensional Measuring Interface Standard) format in the automatic measuring system. After measuring the molds, a grinding map is generated using the gap between the CAD model and measured values of mold. The grinding map displays the machining tendency and the required amount of grinding with values on a 3D map. Therefore, the quality of molds can be ensured with exactness and quickness based on the grinding map. This study shows that integrating the planning, measuring, and analyzing based on computer technology can solve the problem of quality assurance of mold using the proposed method, therefore the productivity can be increased.

간호조무사의 근무환경인식과 성격성향에 관한 연구 (A Study on the Working Environment Recognition and the Caracter Disposition of Nurse Aides)

  • 이선이
    • 한국보건간호학회지
    • /
    • 제4권1호
    • /
    • pp.57-74
    • /
    • 1990
  • As the whole world took on the tendency to be highly industrialized, it became necessary for each field of occupation to require professional man power. Especially, since the World War n, the participation of woman power in economic activities has been continually increasing. In our country also, because of the rapid economic growth, change in the way of thinking of women as well as their participation in economic activities are increasing. Thus, woman power is being utilized in various occupational fields from simple physical labor to those that require high-professional skill. Also, continued economic development policies, by setting the establishment of welfare society as the ideology to be fulfilled, brought expansion of medical facilities in the field of public health and increase in man power in that field. As for the nursing specialists, more than 6000 have been being produced per year and as of the end of 1988, the total number of nursing specialists, reached 123, 115. Therefore, this study is done to recognize the professional knowledge and ability of nursing specialists, who take up $40\%$ of the total public-health related man power in our country, through evaluating their working environment and their disposition of character. This study, which was done from September 18th to September 30th 1989, took on the method of using formed questionnaires that had been amended and supplemented during two preparatory investigations, 322 of such questionnaires were used as an analytical material. In the formation of questionnaires, 12 questions were related to the working environment, and 26 in fortotal were related to the disposition of character, 5 for wise-disposition, 11 for activedisposition and 10 for open-disposition. The measuring method, which used 5-point-standard, allowed 5 points for affirmative recognition of the working environment, also 5 points for showing wise, active and open disposition of character and only point in opposite cases. Collected materials were analyzed, through an electronic calculation, into the average value, the standard deflection percentage, pearson corelative number and stepwise multiple regression. Summarizing the results from this study is as follows: 1. It was shown that the nursing specialists with the average of 3.07 have affirmative recognition of their working environment. The questions which drew most affirmative reaction were those concerning finance-management system such as hand, the questions that received negative reaction were those concerning communication method with the average of 2.49. Such reaction seems to have resulted from the cramming regulation by the superior authorities. Concerning the recognition of working environment in relation to employment conditions, more affirmative recognition is shown with the average of 3.14. at hospitals where injection job is not performed. The nursing specialists working at regular hospitals show more affirmative recognition than those at general hospitals, the averages being respectiely 3.16 and 3.03. 2. As for the disposition of character of the nursing specialists, active-disposition was highest with the average of 3.38, next was wise-disposition with 3.20 and the lowest was open-diposition with 2.98. Variable-wise disposition of character shows that wise-disposition and academic background are beneficially correlated by 0.12. Ative-disposition and open-disposition show correlation to the office term by respectively 0.16 and 0.21. In other words. better academic background leads to higher wise-disposition and more - experience results in higher active and open disposition. Also, the class that performs the injection job, in relation to the working environment, might cause change in the self-conceit that identify those in that class with the nurses; however, as far as professional judgment and action, in dealing with nursing job, being wise, active and open is concerned, not much effect is made. 3. The relation between the recognition of the working environment and the disposition of character is that more afirmative recognition- a nursing specialist has about her working environment, the higher the active-disposition becomes by 0.13. The degrees of the relation between recongnition of environment and wise and open dispositions show respectively 0.06 and -0.06 and -0.06. That is to say that when having more affirmative recognition of the working environment, a nursing specialist shows wise but closed disposition of character. This, howerver, didn't mean much statistically. When observing the results mentioned above, it is conspicuous that the nursing specialists, working as substitutes for the nurse at medical institutions of various sizes, get the feeling of being somewhat equal to the nurses and to some extent, fulfill their desire to accomplish their ego; however, as far as professional ability expansion if concerned. they lack wise and open dispositions. Therefore, considiering upon the results of this study, in medical institutions where the work of nursing specialists is regaded equal to that of the nurses, as a medical member who deals with human lives, it is desirable to make the nursing specialists work under the supervision of the nurses and to offer them continuous education to strengthen and improve their natural dispositions.

  • PDF

유기용제 측정용 흡착관 개발을 위한 AC 및 ACF의 흡착특성 (Desorption characteristics of Activated Carbon and Activated Carbon Fiber by Development of Sorbent Tube for Measurement of Organic Solvent)

  • 원정일;김기환;신창섭
    • 환경위생공학
    • /
    • 제17권3호
    • /
    • pp.99-109
    • /
    • 2002
  • Charcoal $tube/CS_2$ method are more popularly used than any other in the measurement of the working environment for the exposure evaluation of organic solvent, but it is some weak points that the lower accuracy can be obtained on the polar materials and within the range of the low concentration. Thus solvent desorption method has been developed to make accuracy higher and to overcome some weak points. However, because of high price of adsorption tube for thermal desorption and the short of study on its application to the working environment, it is not popularly used in the domestic industrial hygiene fields. This dissertation aims to develop thermal desorption and adsorption tubes for measuring organic solvents in the working environment, by comparing and analyzing breakthrough condition and adsorption capacity with ACF. Specific surface area of ACF used in this study is wider than the one of AC and micropore of ACF related with adsorption has been developed, and adsorption velocity and adsorption amount are very excellent by linking a pore of surface and an inside well into micropore. 1. Result of analysis on physical characteristics of adsorbent, the specific surface area of ACF was 1.3 times higher than that of AC. Distribution ratio of micropore related to adsorption was 94% on ACF and AC. Result of SEM, micropore of the AC is opened to the surface. In contrast, ACF shows that extremely fast adsorption speed. Because of micropore are exposed on the surface and penetrate through each other. 2. Breakthrough characteristics of adsorbents was not different from slop of breakthrough curve. The effluent concentration reaches 10% of initial concentration($C_{out}/C_{in}=0.1$, break point) of ACF was 30~316min longer than that of AC. Therefore, the adsorption capacities of ACF was 1.1~4.6 times higher than that of AC. ACF can be used as a proper adsorbent for measurement of organic solvent.

가족스트레스 측정 도구 개발 - 기혼 여성근로자를 대상으로 - (Development of a Questionnaire to Measure Family Stress among Married Working Women)

  • 김광숙;조원정
    • 대한간호학회지
    • /
    • 제36권5호
    • /
    • pp.761-769
    • /
    • 2006
  • Purpose: Even though a number of studies have suggested that appropriate measuring instruments of family stress for working women have to be developed, the validity and reliability of the instruments used have not been consistently examined. The purpose of the present study was to develop a sensitive instrument to measure family stress for married working women, and to test the validity and reliability of the instrument. Method: The items generated for this instrument were drawn from a comprehensive literature review Twenty four items were developed through evaluation by 10 experts and twenty one items were finally confirmed through item analysis. Psychometric testing was preformed and confirmed with a convenient sample of 240 women employed in the industrial sector. Result: Four factors evolved by factor analysis, which explained 50.5% of the total variance. The first factor 'Cooperation' explained 28.1%, 2nd factor 'Satisfaction with relationships' 10.6%, 3rd factor 'Democratic and comfortable environment' 6.3%, and 4th factor 'Disturbance of own living' 5.5%, Cronbach's coefficient of this instrument was 0.86. Conclusion: The study supports the validity and reliability of the instrument.

작업환경측정 적정 비용지원율 수준으로의 조정 방안 (Adjustment of the Appropriate Cost Support Rate for Measuring the Working Environment)

  • 박지연
    • 한국산업보건학회지
    • /
    • 제31권4호
    • /
    • pp.353-366
    • /
    • 2021
  • Objectives: An appropriate level of cost support is being proposed to maximize the participation rate. In addition, as the amount of support is highly concentrated at the level of the limit under the current level of supports, the level of cost support is low when the actual level of cost of measuring the working environment exceeds the limit. This paper describes the adjustment of an appropriate cost support rate. Methods: First, this paper analyzes the current cost support status using data from the KOSHA. Second, an alternative for adjusting the cost support rate is presented in consideration of the incentive aspect. Third, we present simulation results for the average cost support rate, the impact of each alternative on finance, and more. Fourth, the most desirable adjustment method is presented after comparing and analyzing the results of various alternatives. Results: In this paper, we present a new scale model. This model is a mixture of flat-rate, fixed rate, and subside cap. It is expected that the new model will not only facilitate participation in businesses with low measurement costs, but also have the effect of controlling measurement costs for institutions that incur greater costs. It is also expected that setting a cap will have the effect of considering government finances and inducing excessively costly institutions to reduce costs. Thus, the new model is likely to be superior to others. If the fourth plan is applied to new businesses and the fifth plan is applied to sustainable businesses, the average cost support rates will be 87.68 percent and 65.18 percent, respectively, and the needed finances will be 2.5 billion won, 18.8 billion won, and 21.3 billion won in total. Conclusions: It seems most desirable to introduce a new model that combines flat-rate, fixed-rate, and subsidy cap systems and achieve an appropriate cost support rate through this model.

A Study on the Ventilation Method for a Factory with a Sealed Structure

  • Kim, Yeong-Sik;Yi, Chung-Seob;Lee, Dae-Chul;Jeong, Hyo-Min;Chung, Han-Shik
    • 동력기계공학회지
    • /
    • 제18권6호
    • /
    • pp.159-165
    • /
    • 2014
  • On this work, the importance of industrial ventilation was investigated and examined the theoretical point and problems about general ventilation of factory exposed on high temperature during summer. As a case study, the ventilation planning of the printed circuit board (PCB) etching process for an electronic company was carried out and each of those characteristics were compared by installing actual ventilation systems and measuring the changing state of the working environment in accordance with ventilation method during summer. The purpose of the study is to present an efficient ventilation method for a factory with a closed structure under high temperature environment. In summary, for a factory with a sealed structure such as the target PCB manufacturing factory in this study, the forced supply and exhaust method was the most appropriate ventilation method for maintaining a low.

연구활동종사자 작업환경측정 결과 및 제도개선 방향 (Work Environment Measurement Results for Research Workers and Directions for System Improvement)

  • 황제규;변헌수
    • 한국산업보건학회지
    • /
    • 제30권4호
    • /
    • pp.342-352
    • /
    • 2020
  • Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.