• 환경영향평가
• /
• 제19권4호
• /
• pp.431-441
• /
• 2010

In this study, inter-comparison for PM-2.5 was undertaken. The PM-2.5 mass concentrations using the gravimetric and beta-attenuation methods were compared during the winter in 2007. Two different types of conventional filter-based measurements (Cyclone type and Impactor type) were also collocated and the measurement data was compared with each other. As a result, continuous PM-2.5 data using beta attenuation method show a comparable mass concentration with gravimetric measurement when the inlet of beta-gauge sampler is heated. The results also showed that the cyclone type shows a little high PM-2.5 concentration than Impactor type. In all the sampling cases, the correlations between measurement methods are high. Subsequently, this study suggests that highly correlated relationship between PM-2.5 measurement instruments can be obtained through the inter-comparison results based on filterb-ased gravimetric method and more intensive measurement and theoretical studies are needed in order to clarify the measurement errors for different sampler types.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.53-69
• /
• 2024

The solubility of Cloxacillin sodium in ethanol, 1-propanol, isopropanol, and acetone solutions was measured at different temperatures. The melting property was also tested by using a differential scanning calorimeter (DSC). Then, the solubility data were fitted using Apelblat equation and λh equation, respectively. The Wilson model and NRTL model were not utilized to correlate the test data, since Cloxacillin sodium will decompose directly after melting. For comparison purposes, the four empirical models, i.e., Apelblat equation, λh equation, Wilson model and NRTL Model, were evaluated by using 1155 solubility curves of 103 solutes tested under different monosolvents and temperatures. The comparison results indicate that the Apelblat equation is superior to the others. Furthermore, a new method (named the calculation method) for determining the Apelblat equation using only three data points was proposed to solve the problem that there may not be enough solute in the determination of solubility. The log-logistic distribution function was used to further capture the trend of the correlation and to make better quantitative comparison between predicted data and the experimental ones for the Apelblat equation determined by different methods (fitting method or calculation method). It is found that the proposed calculation method not only greatly reduces the number of test data points, but also has satisfactory prediction accuracy.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.15-19
• /
• 2003

The Total Least Squares (TLS) method is introduced in comparison with the conventional Least Squares (LS) method. The principles and mathematical models for both methods are summarized and the comparison results from their applications to a simple geometric example, fitting a straight line to a set of 2D points are presented. As conceptually reasoned, the results clearly indicate that LS is more susceptible of producing wrong parameters with worse precision rather than TLS. For many applications in surveying, can adjustment computation and parameter estimation based on TLS provide better results.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.233-244
• /
• 2006

In this paper, we develop the Bayesian multiple comparisons procedure for the binomial distribution. We suggest the Bayesian procedure based on fractional Bayes factor when noninformative priors are applied for the parameters. An example is illustrated for the proposed method. For this example, the suggested method is straightforward for specifying distributionally and to implement computationally, with output readily adapted for required comparison. Also, some simulation was performed.

• 대한수학회논문집
• /
• 제34권2호
• /
• pp.657-670
• /
• 2019

In this paper, we consider the preconditioned iterative methods for solving linear complementarity problem associated with an M-matrix. Based on the generalized Gunawardena's preconditioner, two preconditioned SSOR methods for solving the linear complementarity problem are proposed. The convergence of the proposed methods are analyzed, and the comparison results are derived. The comparison results showed that preconditioned SSOR methods accelerate the convergent rate of the original SSOR method. Numerical examples are used to illustrate the theoretical results.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.25-31
• /
• 2010

Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP method. The result using improved CIP method shows the better result of the experiments, comparison with result of original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.119-127
• /
• 2015

PURPOSES : Before-and-after studies of red light cameras were conducted with the aim of reducing the number of side right-angle collisions. Three different methods were used for the before-and-after studies, and the analysis results were compared. METHODS : This research used the naive before-and-after method, the comparison-group method, and the empirical Bayes method to study the effects of red light cameras on side-angle collisions. The results of the three before-and-after methods were compared and interpreted in terms of safety indications at signalized intersections. RESULTS : The research results showed that side right-angle collisions can be reduced by installing red light cameras at signalized intersections. All three methods guarantee safety improvements of 25~30% on average. With regard to the results of each method, the naive before-and-after method, the comparison-group method, and the empirical Bayes method showed safety improvements of 25.6%, 27.8%, and 29.7%, respectively. CONCLUSIONS : It was concluded that red light cameras are an effective countermeasure to improve intersection safety. In particular, by installing red light cameras, side right-angle collisions can be reduced by up to approximately 25~30%.

• 응용통계연구
• /
• 제31권5호
• /
• pp.599-610
• /
• 2018

반복이 있는 랜덤화 블록 모형(randomized block design with replications)에서 비모수 다중비교 방법으로는 Mack과 Skillings (Technometrics, 23, 171-177, 1981) 방법이 있다. 이 방법은 각 블록의 처리에서 반복된 관측값 대신 관측값들의 평균을 이용해 순위를 매기기 때문에 정보의 손실이 발생할 가능성이 있다. 이를 보완하기 위해 본 논문에서는 Hodges와 Lehmann (The Annals of Mathematical Statistics, 33, 482-497, 1962)이 제안한 정렬방법과 Chung과 Kim (Communications for Statistical Applications and Methods, 14, 551-560, 2007)이 제안한 결합위치 검정법을 확장하여 반복이 있는 랜덤화 블록 모형에서 새로운 비모수 다중비교 방법을 제시하였다. 또한 몬테카를로 모의실험(Monte Carlo simulation)을 통해 모수적 방법과 기존의 비모수적 방법과의 family wise error rate (FWE)와 검정력을 비교하였다.

• 응용통계연구
• /
• 제19권3호
• /
• pp.447-460
• /
• 2006

본 연구에서는 확률모형의 모수로부터 얻어지는 여러 형태의 함수간의 크기를 다중 비교 하는 방법을 제안하고자 한다. 이 방법은 비교대상인 모수 함수 간의 선호확률을 베이지안 방법으로 추정하고, 이들로부터 얻어지는 선호행렬을 이용한 새로운 다중비교법이다. 이러한 방법의 제안에 필요한 이론과 비교기준을 고안하였으며, 응용 예로 제안된 방법을 s의 독립인 지수분포 모수의 기하평균 크기 비교에 적용하였다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.235.2-236
• /
• 2002

The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring mode followed by three work-up methods for comparison: EPA method, isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in water samples were extracted with dichloromethane. (omitted)