• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.93-101
• /
• 1999

This test process on screening method for the detection of residual antibiotics in milk is simple, economic, sensitive to residual antibiotics and was given approval international organs. Thus, this study was carried out the comparison of Disk assay method and TTC-II method for sensitivity and minimum detectable range of antibiotics in raw milk. The results of this study was summarized as follows ; 1. The number of samples requested for treatment of mastitis was 198 samples. Comparison or analytical results among the methods of TTC-II, disk assay and Delve sp was that TTC-II 37 samples(18.6% ), Disk assay 125samples(63.1%), Delve SP 130 samples(65.7% ) reacted positively. Conformity rate of Delve SP and Disk assay was 70%. 2. Detectable limits of disk assay method in some antibiotics were more sensitive than those of official method(0.05-0.0025ppm in the $\beta$-lactams, 1ppm in two aminoglycoside, 0.2 ppm in one tetracycline, similar in one macrolide) 3. For sensitivity of residual sulfonamides TTC-II was much more sensitive than disk assay. Detectable limits of sulfamethazine and sulfadimethoxine were 30 to 50ppm levels. 4. The best medium preservation period is 1-2 days. 5. Concentration of brome cresol purple related to resistance for B stearothermophilus culture was 24ppm/ml. These results show that disk assay method for screening detection of antibiotics residuces in milk is worthy of use.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.77-85
• /
• 1999

When producing partial denture using a Chrome-cobalt alloy being used universally, 45 pattern of them to compare casting characters according to 5 burying methods(special ring method, plastic ring method, general metal ring method) and 5 casting directions(straight, upper, lower, left and right directions) were compared and evaluated. The results were as follows : 1. The comparison of casting characters in accordance with burying type shows that the special ring method to install blind air vent using utility wax was the highest rate of 76.9%, followed by 69.1% of the plastic ring to cast without ring and 61.1% of the metal ring method being used universally respectively. Namely the special ring method was best. The significant level was P<0.05 statistically. 2. The comparison of casting character in accordance with casting directions shows that the straight casting was the highest of 77.9%, and followed by right casting of 74.2%, left casting of 66.7%, upper casting of 63.5%, and lower casting of 62.9% respectively, Namely the straight casting was best.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.384-390
• /
• 2004

In this paper we compare the performance of 4 different algorithms for converting the sampling frequency of an audio from 44.1KHz to 48KHz. The algorithms considered here include the basic polyphase method. sine function based method. multi-stage method. and B-spline based method. For a fair comparison, the sampling rate converters using the 4 algorithms are redesigned under a high fidelity condition. Then, their H/W complexities are compared in terms of the computational complexity and the memory size. As a result, it is shown that the basic polyphase method and sine function based method outperform the other two in terms of the computational complexity, while the B-spline based method requires less memory than the others.

• Journal of Korea Multimedia Society
• /
• v.22 no.7
• /
• pp.780-789
• /
• 2019

In this paper, we propose a new indoor localization method for indoor mobile robots using LiDAR. The indoor mobile robots operating in limited areas usually require high-precision localization to provide high level services. The performance of the widely used localization methods based on radio waves or computer vision are highly dependent on their usage environment. Therefore, the reproducibility of the localization is insufficient to provide high level services. To overcome this problem, we propose a new localization method based on the comparison between ceiling shape information obtained from LiDAR measurement and the blueprint. Specifically, the method includes a reliable segmentation method to classify point clouds into connected planes, an effective comparison method to estimate position by matching 3D point clouds and 2D blueprint information. Since the ceiling shape information is rarely changed, the proposed localization method is robust to its usage environment. Simulation results prove that the position error of the proposed localization method is less than 10 cm.

• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.541-548
• /
• 2024

Purpose: This study aims to compare the grounding methods of transformers currently used in most industrial sites in Korea to analyze the stability of power quality and the risk of electric shock. Method: The ungrounded method allows for continuous power supply even in the event of a single-phase ground fault, resulting in a lower risk of electric shock. In contrast, the solidly grounded method focuses on quickly cutting off power during incidents such as ground faults or lightning strikes to protect load equipment, as explained through literature comparison. Result and Conclusion: It is concluded that the ungrounded method is preferable in environments where continuous power supply is essential.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.4
• /
• pp.11-21
• /
• 2015

Purpose : The purpose of this study was to provide the material about the treatment effect of hand function training and writing training being performed as a part of treatment to improve the function of the non-dominant hand of the patients whose dominant hand is damaged and thus need to improve their non-dominant hand's function. Method : During one month of November, 2013, this study randomly chose five study subjects for hand function training, five for writing training, and ten of control group from 20 normal male and female adults going to K Univ. in Busan. All study subjects fully understood all of the training course, agreed to take the test in this study, and volunteered to participate in the test. Each training was performed five times for two weeks, 30 minutes each time. For measurement, Purdue pegboard was used to look into the change of hand dexterity. To investigate an improvement in hand function through hand function training and writing training, this study conducted early evaluation before training, interim evaluation, and final evaluation. Result : First, according to the comparison of dominant hand dexterity by group and by method during a training period, the groups of hand function training and of writing training improved dominant hand dexterity more than the control group. Secondly, according to the comparison of non-dominant hand dexterity by group during a training period, the groups of hand function training and of writing training improved dexterity more than the control group. According to the comparison of non-dominant hand dexterity by method during a training period, there was no big difference in dexterity between the groups of hand function training and of writing training and the control group. But, the group of hand function training showed a further improvement. Thirdly, according to the comparison of both-hand dexterity by group and by method during a training period, the groups of hand function training and of writing training improved both-hand dexterity more than the control group. Fourthly, according to the comparison of both-hand handling ability by group and by method during a training period, the groups of hand function training and of writing training improved both-hand handling ability more than the control group. Conclusion : Given the study result, it is considered that hand function training and writing training help brain damaged patients improve their hand function for their daily activity. And it will be meaningful to research brain damaged patients' motor skills after their brain damage, and the patients who have low abilities of visual perception and cognition. In the future, it will be necessary to secure more study subjects and perform systematic training during a sufficient test period.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.2
• /
• pp.185-199
• /
• 2005

With the growth of internet shopping malls, there is increasing interest in comparison shopping mall. However most comparison sites compare only book prices by collecting simple XML data and do not provide .the exact comparison Including precise shipping costs. Shipping costs vary depending on each customer's address, the delivery method, and the category of selected goods, so rule based system is required in order to calculate exact shipping costs. Therefore, we designed and implemented comparison shopping mall which compares not only book prices but also shipping costs using rule based inference. By adopting the extensible Rule Markup language (XRML) approach, we proposed the methodology of extracting delivery rules from Web pages of each shopping mall. The XRML approach can facilitate nearly automatic rule extraction from Web pages and consistency maintenance between Web pages and rule base. We developed a ConsiderD system which applies our rule acquisition methodology based on XRML. The objective of the ConsiderD system is to compare the exact total cost of books including the delivery cost over Amazon.com, BarnesandNoble.com, and Powells.com. With this prototype, we conducted an experiment to show the potential of automatic rule acquisition from Web pages and illustrate the effect of delivery cost.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.110-115
• /
• 2001

In this paper, a multiple comparison was proposed to minimize the amount of coolant. And new coolant level, called "low level", was suggested to show usefulness of multiple comparison for experiments. The amount of this levee is about 1/4 of conventional coolant amount-called "high level", and dry cutting is called "none level". Using these coolant levels, the cutting temperatures of each coolant level in turning process were analyzed by analysis of variance(ANOYA)-test and a multiple comparison. As the result of ANOVA-test, we have just known that the average of temperature of each coolant level is not equal. However by Tukey's HSD, one of multiple comparison. it was analyzed that the average of temperature of low level is similar to that of high levee and different from that of none level.erent from that of none level.

• The Korea Journal of Herbology
• /
• v.28 no.3
• /
• pp.33-38
• /
• 2013

Objectives : The present study has been undertaken to investigate the effects of Carthami Semen and Jogyeongjongok-Tang on pregnant rats. Method : In this experiment, the pregnant rats were administered by water extracts of Carthami Semen and Jogyeongjongok-Tang. The levels of weights, ALT, AST, ALP, BUN, creatinine, progesterone, Na and K in serum and reproductive indices of the rats were measured after treatment. Results : The levels of body weight gains were not significantly changed in comparison with Control group in Carthami Semen group and Jogyeongjongok-Tang group. In the levels of reproductive indices of the rats, the number of corpora lutea, implantation and viable fetuses, post-implantation loss, fetal weight and placental wight were not significantly changed in comparison with Control group in Carthami Semen group and Jogyeongjongok-Tang group. But pre-implantation loss was significantly increased in comparison with Control group in Carthami Semen group. The levels of BUN, creatine, ALT, AST and ALP were not significantly changed in comparison with Control group in Carthami Semen group and Jogyeongjongok-Tang group. The level of progesterone was not significantly changed in comparison with Control group in Carthami Semen group and Jogyeongjongok-Tang group. The levels of Na and K were not significantly changed in comparison with Control group in Carthami Semen group and Jogyeongjongok-Tang group. Conclusion : Reviewing these experimetal results, it appeared that Carthami Semen and Jogyeongjongok-Tang had not toxicity on pregnant rats.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.3
• /
• pp.174-180
• /
• 2024

It is important to measure the performance of group project but also very important to evaluate the contribution of individual members fairly. The degree of contribution of group members can be assessed by pair-wise comparison method of the Analytic Hierarchy Process. The degree of contribution of group members can be biased in a way that is advantageous to evaluator oneself during the pair-wise comparison process. In this paper, we will examine whether there is a difference in the contribution weight vectors obtained when including evaluator and excluding oneself in the pair-wise comparison. To do this, the experimental data was obtained by making pair-wise comparison in two ways for 15 5-person groups that perform term projects in university classes and 15 pairs of weight vectors for contribution were obtained. The results of the nonparametric test for these 15 pairs of weights vectors are given.