• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1337-1340
• /
• 2001

The bulk photopolymerization of methyl methacrylate (MMA) with para-substituted phenylsilanes such as F-C6H4SiH3 (1), H3C-C6H4SiH3 (2), and H3CO-C6H4SiH3 (3) was performed to produce poly(MMA)s containing the respective silyl moiety as an end group. For all the hydrosilanes, the polymerization yields and the polymer molecular weights decreased, whereas the TGA residue yields and the relative intensities of Si-H IR stretching bands increased as the relative silane concentration over MMA increased. The polymerization yields and polymer molecular weights of MMA with 1-3 increased in the order of 3 < 1 < 2. These hydrosilanes influence significantly upon the photopolymerization of MMA as both chain-initiation and chain-transfer agents.

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.5-10
• /
• 2014

A study that copolymerized Ag nanoparticle and furfuryl isocyanate with the crosslinking agent EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) and the initiating agent AIBN (azobisisobutyronitrile) is presented. Measurement of the physical characteristics of the produced macromolecule showed that the water content is 32.08~32.67%, refractive index 1.446~1.448, visible light transparency 83.2~67.6%, contact angle $68.2{\sim}83.5^{\circ}$ and tensile strength 0.541~0.755 kgf. It is also demonstrated that the addition of Ag nanoparticles is associated with the reduction of UV-B transmittance and increase in tensile strength. The results show that the produced copolymer can be used as a material for ophthalmic lenses with durability and UV-blocking properties.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.3
• /
• pp.291-294
• /
• 2000

The bulk photopolymerization of methyl methacrylate(MMA) with bis(silane)s such as 1,4-$C_6H_4(SiH_3)_2$ (1) and 1,4-$C_6H_4(SiH_2Me)_2$ (2) was performed to produce poly(MMA)s possessing the corresponding bis(silyl) moiety as an end group. For the bis(silane)s, while the polymerizaiton yields and the polymer molecular weights decreased, the TGA residue yields and the relative intensities of Si-H IR stretching bands increased as the relative bis(silane) concentration over MMA increased. The polymerizaion yield, polymer molecular weight, and TGA residue yield of MMA with 1 were found to be higher than those with 2. The bis(silane)s appears to influence significantly upon the photopolymerization of MMA as both chain initiation and chain transfer agents.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.230-237
• /
• 2006

Copolymers(HSA-98-20, HSA-98-0, HSA-98+20) which we acrylic resin containing 80% solid content were synthesized by the reaction of monomers, including methyl methacrylate, n-butyl acrylate, and 2-hydroxyethyl acrylate with a functional monomer, acetoacetoxyethyl methacrylate (AAEM), which nay give improvements in cross-linking density and physical properties of films. The physical properties of prepared acrylic resins, containing AAEM, are as follows viscosities, $1420\sim5760cps$ ; number average molecular weight, $2080\sim2300g/mol$; polydispersity index, $2.07\sim2.19$ ; and conversions, $88\sim93%$. In the next step, high-solid coatings (HSA-98-20C, HSA-98-0C, HSA-98+20C) were prepared by the curing reaction between acrylic resins containing 80% solid content and isocyanate at room temperature. Various properties were examined on the film coated with the prepared high-solid coatings. The introduction of AAEM to the coatings enhanced the abrasion resistance and solvent resistance, which indicated the possible use of high- solid coatings for top-coating materials of automobile. Since the curing by viscoelastic measurement occurred in sequence of HSA-98+20C > HSA-98-0C > HSA-98-20C, it was concluded that the curing rates became faster with incresing $T_g$ values.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.796-803
• /
• 1999

Solution copolymerization of styrene(St.) with methyl methacrylate(MMA), ethyl methacrylate(EMA) and n-butyl methacrylate(BMA) was carried out with benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a continuous stirred tank reactor. Reaction volume and residence time were 0.6 liters and 3hours, respectively. The monomer reactivity ratios, $r_1(St.)$ and $r_2(RMA)$ determined by both the Kelen-Tudos method and the Fineman-Ross method were $r_1(St.)=0.60(0.61),\;r_2(MMA)=0.59(0.60);\;r_1(St.)=0.65(0.62),\;r_2(EMA)=0.55(0.52);\;r_1(St.)=0.75(0.67),\;r_2(BMA)=0.63(0.56)$. The cross-termination factor $\Phi$ of the copolymer over the entire St. compositions ranged from 0.26 to 0.96. The $\Phi$ factors of St.-RMA copolymer were increased with increasing St. content. The simulated conversions and copolymerization rates were compared with the experimental results. The average time to reach dynamic steady-state was three times and half of the residence time.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.151-158
• /
• 2010

This paper presents the synthesis of ampholyte immobilized hollow-fiber membranes and adsorption characteristic of metallic ions. This is prepared by radiation induced grafting polymerization of an epoxy group containing Glycidyl methacrylate (GMA) onto an existing polyethylene porous hollow-fiber membrane. Ampholyte ion-exchanged alkalic group, $-NH_2$ (amine function) of Taurine (TAU) is reacted with glycidyl of GMA for the synthesis of stable membrane. However, Sodium sulfite (SS) membrane is also prepared by making chemical bonds with GMA of porous hollow-fiber membrane for the comparison of adsorption characteristic of metallic ions. These are called as TAU and SS membranes, respectively. It is shown that TAU membrane shows a steady flux, 0.9 m/h regardless of the density of TAU, while the flux of SS membrane decreases rapidly as the density of $SO_3H$ group increases. SS membrane showed a negligible flux. TAU membrane with the density 0.8 mmol/g shows the amount of metallic ions adsorbed in the following order, Cu > Cd > Mg > Sb > Pb. In general, TAU membrane with high density and reaction time showed the high amount of metallic ions adsorbed and flux.

• Journal of Adhesion and Interface
• /
• v.2 no.1
• /
• pp.18-22
• /
• 2001

Surface morphology of [poly(vinylidene fluoride)/poly(methyl methacrylate)] (PVDF/PMMA) was investigated on the basis of atomic force microscopy and differential scanning calorimeter measurements. The surface of (PMMA/PVDF) and (H14-PMMA/PVDF) blend films was fully composed with PVDF crystals. Although the difference of surface free energy between PMMA and PVDF is increased with increasing carboxyl group content in PMMA, however, in the case of (H24-PMMA/PVDF) blend film surface, the existence of aggregated H-PMMA was observed. It was found that the degree of surface enrichment of the blend is more affected by the magnitude of intermolecular interaction than the surface free energy difference, Besides, the introduction of carboxyl group for miscible (PVDF/PMMA) blend decreased the miscibility in the blend.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.105-113
• /
• 2016

The present study investigated the immobilization of lipases on silica nanoparticles and silica-coated magnetite nanoparticles as supports with a functional group to enhance the stability of lipase. The influence of functional groups, such as the epoxy group and the amine group, on the activity and stability of immobilized lipase was also studied. The epoxy group and the amino group were introduced onto the surface of nanoparticles by glycidyl methacrylate and aminopropyl triethoxysilane, respectively. Immobilized Candida rugosa lipase on silica nanoparticles and silica-coated magnetite nanoparticles with a functional group showed slightly lower initial enzyme activities than free enzyme; however, the immobilized Candida rugosa lipase retained over 92 % of the initial activity, even after 3 times reuse. Lipase was also immobilized on the silica-coated magnetite nanoparticles by cross-linked enzyme aggregate (CLEA) using glutaraldehyde and covalent binding, respectively, were also studied. Immobilized Candida rugosa lipase on silica nanoparticles and silica-coated magnetite nanoparticles by CLEA and covalent binding showed higher enzyme activities than free enzyme, while immobilized Candida rugosa lipase retained over 73 % of the initial activity after 5 times reuse.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.47-48
• /
• 1992

Polymer containing monomers with pendant phospholipid polar group, 2-(metha-cryloyoxy) ethyl-2-(trimethylammonium) ethyl phosphate(MTP) were synthesized and blood compatibility of the copolymers was evaluated. Good permeability of biocomponents of molecular weight below 10$^4$ through cellulosic membrane coated with the copolymer of 2-(methacryloyoxy) ethyl-2-(tri-methylammonium)ethyl phosphate, butylmethacrylate(BMA), and glycidyl methacrylate(GMA) was observed, (Fig.1).

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.13-22
• /
• 2015

A new methacrylate copolymer that includes chalcone as a side group, poly(4-methacryloyloxyphenyl-4'-methoxystyryl ketone-co-styrene) was synthesized by free radical copolymerization. FTIR and $^1H$ NMR spectroscopic techniques were used to characterize the homopolymers and copolymers. The copolymerizations were carried out to high conversions. Copolymer compositions were established by $^1H$ NMR spectra analysis. The monomer reactivity ratios for copolymer system were determined by the linearized Kelen $T{\ddot{u}}d{\ddot{o}}s$, and Extended Kelen $T{\ddot{u}}d{\ddot{o}}s$ methods and a non-linear least squares method. The molecular weights and polydispersity index of copolymers were measured by using the gel permeation chromatography (GPC). The effect of copolymer compositions on their thermal behavior were studied by differential scanning calorimetry and thermogravimetric analysis methods. The optical properties of the resulting copolymer were also investigated.