• 자원리싸이클링
• /
• 제30권2호
• /
• pp.31-38
• /
• 2021

철(III)과 란타넘(III)이 혼합된 황산용액에서 황산나트륨에 의한 란타넘 복염의 침전 및 분리를 조사했다. 복염 침전에 영향을 줄 수 있는 여러 요인 중 황산나트륨 및 란타넘(III)의 농도, 반응온도 및 시간, 그리고 철(III) 농도에 대해 조사했다. 용액 중 Na+, SO42- 이온 및 란타넘(III) 농도가 높을수록 희토류 복염의 침전률이 증가했고, 반응온도가 100℃까지 증가함에 따라 란타넘 황산염 이온의 형성을 촉진해 희토류 복염의 침전률이 증가했다. 또한 반응시간이 증가할수록 철(III)의 침전률이 감소해 3시간 이후에는 거의 침전되지 않았고, 철(III) 농도는 복염 침전에 큰 영향을 미치지 않았다. 황산용액에 황산나트륨을 첨가하면 란타넘(III)을 선택적으로 침전시켜 철(III)과 분리할 수 있다.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.40-50
• /
• 2005

The influence of tobacco additives on the composition of the combustion products in mainstream smoke is discussed. The effect of additives on the chemical composition of smoke have been further evaluated in order to discover additives that would alter the chemical composition of smoke. Tobacco was uniformly treated at a 1-5$\%$ level with 8 classes of additives. Group M treated with alkali metal salt and group S, F, O give lower tar, nicotine and CO values than the control. Group AN treated with natural antioxidant gives higher tar and CO values than the control. The increases are most probably due to the high transfer rate of the ingredients to smoke. M3 and P1 reduced above the $50\%$ of TSNA from the smoke. M4 and P1 reduced above the $50\%$ of HCN from the smoke. These results suggest that tobacco additives alter pyrolysis or combustion product distribution and provide fundamental data to lead the development of a RRP(reduced risk product).

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.940-948
• /
• 2007

The Advanced Spent Fuel Conditioning Process(ACP), which is the process of the reduction of uranium oxide by lithium metal in a high temperature molten salt bath for spent fuel, was developed at Korea Atomic Energy Research Institute (KAERI). Since the ACP equipment is located in an intense radiation field (hot cell) as well as in a high temperature, it must be remotely operated and maintained. The ACP hot cell is very narrow so the workspace of the wall-mounted mechanical Master-Slave Manipulators(MSMs) is restricted. A Bridge Transported Servo Manipulator(BTSM) system has been developed to overcome the limitation of an access that is a drawback of the mechanical MSMs. The BTSM system consists ot a bridge crane with telescoping tubeset, a slave manipulator, a master manipulator, and a control system. We applied a bilateral position-position control scheme with friction compensation as force-reflecting controller. In this paper, the transmission characteristics on the tendon-and-pulley train is numerically formulated and analyzed. Also, we evaluate the performance of the force-reflecting servo manipulator.

• Corrosion Science and Technology
• /
• 제12권1호
• /
• pp.12-26
• /
• 2013

This work focused on galvanic corrosion of carbon steel bolted GECM/Al plates by long-term test in tap water and NaCl solutions. Test product was carbon steel bolted between cross packed GECM and painted aluminium. Tests for the product and coupled parts determined corrosion rate in tap water and NaCl solutions. Also, using a potentiostat and salt water sprayer, galvanic test was done. In galvanic test on carbon steel bolted GECM/Al plates, corrosion of carbon steel bolt was faster in series of tap water>1% NaCl solution>3.5% NaCl solution. In galvanic couple between aluminium and carbon steel bolt, their corrosion rates were higher than those of single specimen. In galvanic couple between GECM, aluminium, and carbon steel bolt, corrosion behaviors of carbon steel bolt and aluminium were changed due to different corrosion mechanism in tap water and chloride solution.

• 한국환경보건학회지
• /
• 제28권5호
• /
• pp.86-92
• /
• 2002

This study was performed to assets the operating characteristics of food waste composting and co-composting (food waste + sewage sludge) at a compelling facility. The facility was being operated successfully without being affected by kind of composting feed materials. Partial anaerobic condition was detected during food waste composting and co-com-posting, but these two composting systems were proven to be operated successfully under aerobic condition from the monitoring results of $O_2$, volatile solids reduction rate, temperature, and other parameters. The conductivity and chloride concentrations of compost were gradually increased during two composting periods, but the conductivity and chloride concentrations of co-compelling indicated lower values than those of food waste composting at final point(40 m). As a result, co-composting was turned out to be more desirable than food waste composting, considering salt problem. High correlations ($R^2$= 0.9265 for food waste composting and $R^2$= 0.9685 for co-composting) between CEC and volatile organic matter were found. Quality of composts produced from two composting process satisfied Korean heavy metal standard.

• 한국식품영양과학회지
• /
• 제23권5호
• /
• pp.856-862
• /
• 1994

In salt-preserved foods of every kinds, it was examined the growth condition of halophilic bacteria that induced a change of colour, taste, nutritive substance, a production condition of enzyme and a character of crude enzyme. Used bacteria is H. halobium a kind of extremely halophilic bacteria, and the required of optimum culture needed a quite long time of crude enzyme production is 168 hours. Optimum pH is about 7-7.5, so the traditional food of such neutrality pH as soybean paste and soy sauce particularly come into trouble because the growth can flourish in neutrality or alkaliescence, and the crude enzyme also appeared that best activation between pH 6 and pH 8. The optimum temperature is about 37$^{\circ}C$, the optimum temperature of enzyme is about 40 $^{\circ}C$ and the temperature stability is settled for 15 minutes and it is completely inactivated at 10 minutes. In the influence of each metal ion, Fe++ and Mn++ a stimulated the growth of H.halobium and the activation of enzyme, Cu++ and Zn++ were identified that made the growth and the activation of enzyme inhibit.

• 분석과학
• /
• 제10권4호
• /
• pp.291-299
• /
• 1997

톱밥의 주성분인 cellulose를 이용하여 cellulose-OH를 cellulose-Cl로 전환시킨 다음 킬레이트 시약인 2,2'-iminodibenzoic acid염을 반응시켜 킬레이트 흡착제인 2,2'-iminodibenzoic acid-cellulose를 합성하였다. 그리고 합성된 흡착제를 이용하여 Pb(II)와 Cu(II)의 흡착성을 연구하였다. 흡착 특성에 대한 실험 결과, pH가 증가할수록 금속 이온의 흡착량이 증가함을 알 수 있었다. 최적 흡착 반응시간은 약 1시간, 흡착능과 회수량은 Cu(II)보다 Pb(II)의 경우가 더 좋음을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제12권2호
• /
• pp.99-105
• /
• 1980

과망간산염, 염소산염및 과염소산염의 중성자 포획에 수반하는 망간-56 및 염소-38 반조화학종의 분배를 이온교환크로마토구라휘법으로 검토하였다. 과망산염의 망간-56 방사능은 2종의 원자가상태로 나타나며 염소산염의 염소-38은 2종의 원자가상태 그리고 과염소산염의 염소-38은 3종의 원자가상태로 나타난다. 반조에너지는 계산하였다. $^{38m}$Cl의 핵이성체 전이에 수반하는 내부전환은 잔류율에 영향을 미친다. 양이온반경이 클수록 2차 케이지를 돌파하는 반조원자의 확율이 높다. 암모늄염중 암모늄이온은 환원제 작용을 한다. 결정구조에서 자유공간이 크면 잔류율은 낮아진다.다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.668-671
• /
• 2007

A numerical study was conducted on a simplified model of a high-temperature solar receiver which incorporates liquid-metal heat pipe. The objective of this paper is to compare the isothermal characteristics of the heat pipe receiver with the conventional receiver utilizing convection of molten salt as heat carrier. The solar receiver was assumed to be subject to a concentration ratio between 50 and 1,000 to supply high-temperature heat to a stirling engine for electric power generation. For simplicity of the analysis, a cylindrical geometry was assumed and typical dimensions were used based on available literature. The heat pipe had a shape of double-walled cavity and the working fluid was a sodium. The analysis was performed assuming that the radiation heat flux on the inner walls of the receiver was uniform, since the focus of this study was laid on the comparison of the conventional type and heat pipe type receiver. The results showed that the heat pipe type exhibited superior performance when the operating temperature becomes higher. In addition, to explore the advantage of the heat pipe receiver, the channel shape and dimensions should be adjusted to increase the heat transfer area between the wall and the heat trnasfer medium.

• 통합자연과학논문집
• /
• 제10권4호
• /
• pp.175-191
• /
• 2017

In organic chemistry amide synthesis is performed through condensation of a carboxylic acid and an amine with releasing one equivalent of water via the corresponding ammonium carboxylate salt. This method is suffering from tedious processes and poor atom-economy due to the adverse thermodynamics of the equilibrium and the high activation barrier for direct coupling of a carboxylic acid and an amine. Most of the chemical approaches to amides formations have been therefore being developed, they are mainly focused on secondary amides. Direct carbonylations of tertiary amines to amides have been an exotic field unresolved, in particular direct carbonylation of trimethylamine in lack of commercial need has been attracted much interests due to the versatile product of N,N-dimethylacetamide in chemical industries and the activation of robust N-C($sp^3$) bond in tertiary amine academically. This review is focused mainly on carbonylation of trimethylamine as one of the typical tertiary amines by transition metals of cobalt, rhodium, platinum, and palladium including the role of methyl iodide as a promoter, the intermediate formation of acyl iodide, the coordination ability of trimethylamine to transition metal catalysts, and any possibility of CO insertion into the bond of Me-N in trimethylamine. In addition reactions of acyl halides as an activated form of acetic acid with amines are reviewed in brief since acyl iodide is suggested as a critical intermediate in those carbonylations of trimethylamine.