• Korean Journal of Materials Research
• /
• v.27 no.2
• /
• pp.100-106
• /
• 2017

Nanosized and aggregated $Y_2O_3:Eu$ Red phosphors were prepared by template method from metal salt impregnated into crystalline cellulose. The particle size and photoluminescent property of $Y_2O_3:Eu$ red phosphors were controlled by variation of the calcination temperature and time. Dispersed nanosol was also obtained from the aggregated $Y_2O_3:Eu$ Red phosphor under bead mill wet process. The dispersion property of the $Y_2O_3:Eu$ nanosol was optimized by controlling the bead size, bead content ratio and milling time. The median particle size ($D_{50}$) of $Y_2O_3:Eu$ nanosol was found to be around 100 nm, and to be below 90 nm after centrifuging. In spite of the low photoluminescent properties of $Y_2O_3:Eu$ nanosol, it was observed that the photoluminescent property recovered after re-calcination. The dispersion and photoluminescent properties of $Y_2O_3:Eu$ nanosol were investigated using a particle size analyzer, FE-SEM, and a fluorescence spectrometer.

• Korean Journal of Materials Research
• /
• v.27 no.10
• /
• pp.534-543
• /
• 2017

$Gd_2O_3:Eu^{3+}$ red phosphors were prepared by template method from crystalline cellulose impregnated by metal salt. The crystallite size and photoluminescence(PL) property of $Gd_2O_3:Eu^{3+}$ red phosphors were controlled by varying the calcination temperature and $Eu^{3+}$ mol ratio. The nano dispersion of $Gd_2O_3:Eu^{3+}$ was also conducted with a bead mill wet process. Dependent on the time of bead milling, $Gd_2O_3:Eu^{3+}$ nanosol of around 100 nm (median particle size : $D_{50}$) was produced. As the bead milling process proceeded, the luminescent efficiency decreased due to the low crystallinity of the $Gd_2O_3:Eu^{3+}$ nanoparticles. In spite of the low PL property of $Gd_2O_3:Eu^{3+}$ nanosol, it was observed that the photoluminescent property was recovered after re-calcination. In addition, in the dispersed nanosol treated at $85^{\circ}C$, a self assembly phenomenon between particles appeared, and the particles changed from spherical to rod-shaped. These results indicate that particle growth occurs due to mutual assembly of $Gd(OH)_3$ particles, which is the hydration of $Gd_2O_3$ particles, in aqueous solvent at $85^{\circ}C$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.408-413
• /
• 2006

We assessed the ability of a Pseudonocardia sp. from soil samples to bioconvert vitamin $D_3$. The optimal culture conditions for the bioconversion of vitamin $D_3$ to active $1{\alpha}$,25-dihydroxyvitamin $D_3$ were investigated by varying the carbon and nitrogen sources, the metal salt concentrations, the initial pH, and the temperature. Microbial transformations were carried out with the addition of vitamin $D_3$ dissolved in ethanol. They were sampled by extraction with methanol-dichloromethane and the samples were examined by HPLC. Optimum culture conditions were found to be 0.4% yeast extract, 1% glucose, 3% starch, 1% fish meal, 0.2% NaCl, 0.01% $K_2HPO_4$, 0.2% $CaCO_3$, 0.01% NaF, and pH 7.0 at $28^{\circ}C$. The optimal timing of the addition of vitamin $D_3$ for the production of calcitriol by Pseudonocardia autotrophica ID9302 was concurrent with the inoculation of seed culture broth. Maximum calcitriol productivity and the yield of bioconversion reached a value of 10.4mg/L and 10.4% respectively on the 7th day in a 75L fementer jar under the above conditions.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.11-17
• /
• 2000

Consumption of nickel is continuously increasing and the wastes of secondary battery, ferrite and catalyst containing Ni are also generated periodically. Among those wastes, the aim of this research is the recovery of nickel from used Ni-Cd recharge battery. Battery consisted of Ni 24 wt%, Fe 30 wt% and Cd 18.5 wt%. Metal was recovered by solvent extraction after leaching. Cadmium was leached completely in 1N-HCl and Ni was recovered above 70%. 30 vol% MSP-8 separated Cd and Ni completely from acidic leaching solution. In addition $NH_4NO_3$ as one of ammonium salt type leachants showed an excellent leaching selectivity to Ni and Cd. Ni in leached solution was recovered completely by LIX-extractant and more than 70% of Cd in raffinate was by D2EHPA.

• Journal of Powder Materials
• /
• v.24 no.6
• /
• pp.457-463
• /
• 2017

Nanosized $Gd_2O_3:Eu^{3+}$ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between $Gd_2O_3:Eu^{3+}$ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged $Gd_2O_3:Eu^{3+}$ and negatively charged mica above pH 6. To prepare $Gd_2O_3:Eu^{3+}$-coated mica ($Gd_2O_3:Eu/mica$), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of $Gd_2O_3:Eu^{3+}$. In spite of the low luminescence of the $Gd_2O_3:Eu/mica$, the luminescent property is recovered after calcination above $600^{\circ}C$ and is enhanced by increasing the $Gd_2O_3:Eu^{3+}$ coating amount. The $Gd_2O_3:Eu/mica$ is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.132-138
• /
• 2016

In this study, we report the fabrication of functional complex fibers, which have been studied widely globally for numerous applications. Here, we fabricated conductive complex fibers with antibacterial properties by coating metal ions on the surface of plastic (polypropylene) fibers using the electroless and electrochemical deposition. First, we polished the polypropylene melt-blown fiber surface and obtained an absorbing Pd seed layer on its surface. Subsequently, we substituted the Pd with Cu. Bis-3-sulfopropyl-disulfide disodium salt (SPS), polyethylene glycol (PEG), and ethylene thiourea (ETU) were used as the brightener, carrier, and leveler, respectively for the electroplating. We focused on most achieving the stable plating condition to remove dendrites, which are normally during electroplating metals so that smooth layer is formed on the fiber surface. The higher the amount of SPS, the higher was the extent of irregular plate-like growth. Many irregularities in the form of round spheres were observed with increase in the amount of PEG and ETU. Hence, when the additives were used separately, a uniform coating could not be obtained. A stable coating was obtained when the three additives were combined and a uniform 5-9 μm thick copper layer with a stable morphology could be obtained around the fiber. We believe that our results can be applied widely to obtain conductive fibers with antibacterial properties and are useful in aiding research on conductive lightweight composite fibers for application in information technology and robotics.

• Microbiology and Biotechnology Letters
• /
• v.5 no.3
• /
• pp.133-140
• /
• 1977

The results of electron microscopic studies on the cell fine structure of Nocardia sp the location of tellurite-reducing enzyme and the reduction part of T. T. C. (Triphenyl tetrazonium chloride) were summarized as follows. As the fine structure of the cell, the membrane-like structure with unit membrane was distributed in the cytoplasm. The membrane-like structure had complicate forms: some of membrane-like structure appeared spiral form. As the metal tellurium salt appeared in the cytoplasm, it is obvious that tellurite and tellurate-reducing enzymes are present in the cytoplasm. Reduction of T. T. C. took place in the cell membrane and the intracellular membrane-like structure. Therefore, it was thought that reduction of tellurate and T. T. C. took place in different parts. T. T. C. formazane formed in the cell was reoxidized by osmic acid which was used as a fixation reagent for the electron microscopic specimen preparation. As 95％ T. T. C. formazane was soluble in ethanol and embedding materials and removed out of the cell, an originally formed formazane appeared as electron light part on the electron microscopic image.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.2
• /
• pp.23-32
• /
• 2011

The purpose of this study is to produce basic planning criteria required in ecological restoration and improvement works of streams in rural area through the application of stream assessment methods (water quality, soil environment, and ecological function assessment) at 6 study sites of Han River basin. The investigation results were as followings; 1) There were the evaluation items like a manure use, salt degree, river peripheral tree, which did not fitted to apply to domestic streams, in the SVAP (Stream Visual Assessment Protocol) and NRCS Riparian Assessment that were evaluation models developed in USDA. The area inhabitants with a little knowledge and education personally seems to utilize the evaluation methods through improvement partly with an aspect that evaluation is slightly easy. 2) From the stream assessment results, the construction of diverse pools, large woody debris and isolated backwater pool are needed to improve a few of problems observed at the mostly study sites. The result of NRCS Riparian Assessment showed that the improvement of stream bank vegetative communities is needed by planting tree with deep-binding root masses, and managing of noxious weeds and exotic undesirable plants. 3) Summing up, the assessment results showed that the assessment scores were higher at upstream than downstream, the stream with totally maintenance than that with partly maintenance, the stream with slope bank than that with vertical bank, and the stream with a flood plain than that without a flood plain. So, the direction of stream maintenance projects must be set by consideration of those results.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.257-263
• /
• 2017

A cellulolytic strain Y2 was isolated from soil obtained in the Canadian Alpine region. The isolate was identified as Paenibacillus sp. Y2 by 16S rRNA sequencing. When grown in LB medium supplemented with carboxymethyl-cellulose (CMC), CMCase production increased to 122.0% of that observed in LB without CMC. Culture supernatant was concentrated by ultrafiltration and 80% ammonium sulfate precipitates were separated by Hi-Trap Q and CHT-II chromatography. The purified enzyme (EG-PY2) showed a homogeneous single band and the molecular mass was estimated to be 38 kDa by SDS-PAGE. Optimum pH and temperature of the enzyme were 4.5 and $30^{\circ}C$, respectively. The half-life of enzyme activity at 50 was 140.7 min, but the enzyme was drastically inactivated within 5 min at $55^{\circ}C$. The enzyme was highly activated to 135.7 and 126.7% by 5.0 mM of $Cu^{2+}$ or $Mg^{2+}$ ions, respectively, and moderately activated by $Ba^{2+}$ and $Ca^{2+}$ ions, whereas it was inhibited to 76.8% by $Fe^{2+}$, and to ${\leq}50%$ by $Mn^{2+}$, $Co^{2+}$, $Zn^{2+}$, and EDTA. The enzyme was activated to 211.5% in the presence of 0.5 M of NaCl and greatly tolerant to 3.15M of NaCl. The enzyme showed 2.98 times higher ${\beta}$-glucanase activity than CMCase activity. Based on these results, it can be concluded that EG-PY2 is an acidophilic, cold-active, and halotolerant endoglucanase. The authors suggest it is considered to be useful for various industrial applications, such as, fruit juice clarification, acidic deinking processes, high-salt food processing, textile and pulp industries, and for biofuel production from seaweeds.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1040-1044
• /
• 1998

Tetrasodium pyrophosphate peroxidate can be crystallized as a hydrogen-peroxide-bound salt from the solution of tetrasodium pyrophosphate and hydrogen peroxide. The antimicrobial activity and stability of the compound were tested for the use as a food preservative. It showed antimicrobial activities against several food spoilage microorganisms at the concentration of 0.1% (w/v), and was stable for 80 days in room temperature as a form of 70% hydrogen-peroxide-bound tetrasodium pyrophosphate peroxidate. It was also stable at the boiling temperature but decomposed significantly in the presence of metal ions. The compound can be an effective food preservative at the 0.2% (w/v) concentration, which contains 0.03% (v/v) hydrogen peroxide. The compound could be commercialized if the application area and usage direction as well as the removal method of hydrogen peroxide were developed.