• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.1
• /
• pp.58-63
• /
• 2010

Introduction : Head trauma is the main cause of death in aircraft crash. In a Michigan study of structurally survivable, fatal accidents, 80% of the fatally injured had received head trauma. We tried to develop a new helmet for passengers, and perform its efficiency test. Methods : An aircraft helmet requires an excellent protection against head trauma, lightness, and small volumes. In addition, it must be wearable, fire resistant, and non toxic when it is burning. We developed two new helmets made from silicone foam which met all theses requirements. One was thin (2.5cm), and the other was thick (6.3cm). These looked like a motorcycle helmet and had only a soft silicone as liner material without an outer hard shell. Therefore we can carry them easily inside aircrafts. The standard test for helmet is Snell's drop test. It measures the impact acceleration of head shaped metal wearing helmet during we drop it at certain heights. Impact sites were total 5 sites (front, back, right, left and top) for each helmet. All these sites were impacted twice. Results : The thickness of impact sites varied from 2.5cm to 6.3cm. The impact acceleration of 2.5cm thickness site when it was dropped from 1.0 meter was 379g. But, that of 6.3cm thickness site when it was dropped from 1.5 meter was only 163g. Unfortunately, both helmets didn't meet the Snell Standard for motorcycle helmets. Discussion : If we add suitable outer hard shell, and change its thickness and design, the efficiency will be increased. A study indicated that helmet could reduce the risk of head trauma up to 85%. We made helmet for passengers in aircraft crash for the first time. If we improve its weak points, it will decrease the frequency of head trauma in aircraft craft.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.214-221
• /
• 1999

Spot welding is very important and useful technology in fabriaction of the thin sheet structure such as the automobile, train and air craft, Because fatigue strength of the spot welding point is however considerably lower than base metal due to stress concentration at the nugget edge, reasonable fatigue strength evaluation of spot welded lap joint is very important to estimate the reliability and durability of th spot welded structure and to establish a criterion of ling life fatigue design. For reasonalbe fatigue strength evaluation, it is necessary to estimate the fatigue strength of spot welded lap joints, systematically. So far, many investigators have numerically and experimentally studied on the systematic fatigue strength estimation for various spot welded lap joints, and the methods suggested has been considerably accumulated. By the way, for applying them in practical fatigue design of the thin sheet structure fabricated by spot welding ,it is also necessary to verify their efficiency and reliability on the predicted results, Therefore, in this study, a statistical fatigue strength estimation method for spot welded lap joints was developed by using the Weibull probability distribution function. From the result, it was found that fatigue strength and fatigue life of the spot welded lap joints having various dimension were able to be statically predicted . And also, a reliable criterion for long life fatigue design of the spot welded lap joint could be established.

• Journal of Korea Multimedia Society
• /
• v.16 no.10
• /
• pp.1214-1229
• /
• 2013

Maintaining our tradition makes us have pride for our nation and plays important role for recognition and establishment of identity for our unique culture in the world. Contrast to the western scientific technique, the scientific technique of Silla Bell absorbed in the life of our nation is the fruit of wisdom science found through rich life and experience by harmony between our nation and nature. Today, ideological backgrounds for many cultural heritages weren't be found and there are many overflowing hypothesis. Silla Bell is the plastic art including cumulative utopia of the racial spirit. So there would be the information of the racial spirit including symbolization, artistry, creativity, and historicity. However, unlikely with the words, it is the profoundly concentrated shape, so the meaning can be diluted or distorted in later generation. The efforts to figure out the symbolization in Korean bells, especially Silla bell according to its exclusive shape, but no hypothesis was accepted as an established theory of academia by gaining extensive agreements. Thus this paper traces the symbolic meaning accumulated in the shape and prepares for the theoretical background accessing to the artistic spirit of forebears who created super-humanity formativeness. Also regarding the Silla bell which is regarded as the best Buddhist metal craft that people believe they can be free from the anguish at the time of listening to its sound, we studied the symbolization of the bell as the religious ritual custom as well as the possibility to utilize the bell as a motif of living art in the aspect of formative expression.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.1
• /
• pp.13-22
• /
• 2007

As the world has been forming the global village and the cultures of each country are exchanged, the unique cultural specialty of each country high been merged with the generality in the world. The increasing interest on the oriental world and the globalization recently brings the fusion form of oriental and occidental cultures. In such a global trend, it is our challenge to find out the traditional beauty and the design factors of Korea for the new challenge and development of Korean fashion and to develop the most Korean and global design by interpreting them in a modem sense. It is the Era of the Three States when an of official hat among the personal ornaments of Korea was firstly described on the literature, including the literature of ancient China and Chronicles of Three States and Heritage of Three States of Korea. Those literatures clarified that the people in Goguryeo Baekje, Silla and Gaya decorated themselves with gold, silver and jade. Furthermore, since various kinds of ornaments have been excavated, they shown the development of metal craft in the Era of Three States. This study aim to exploit the design motives among the gold crown elements among the ornaments during the Era of Three States, interpret them in a modem expression, develop the textile design using the Adobe photoshop and suggest the application approaches by applying them to the clothing design.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.79-93
• /
• 2013

In the Korean literature, records of systematic gold thread manufacturing such as gold foil(金 箔匠), gold foil bonded with fabrics(付金匠), gold foil bonded with paper materials(金箋紙匠), refining gold(鍊金匠), cutting gold(裁金匠), and making gold thread(絲金匠) can be easily found. We can infer from these literatures that the Korean people used to make gold threads. However, is not existent the gold thread making technique. Thus, a research was done using 67 pieces of gold thread artifacts used in textiles craft of Korea, China and Japan. The purpose of this research was to identify the characteristics of the Korean gold thread by studying the artifacts' form classification, gold foil, glue and the base. First, gold thread is divided into flat gold thread and wrapped gold thread. Wrapped gold thread was made in more various methods such as with a paper on the flat gold thread, metal thread and wrapped gold thread with gold foil on top. Compared to the flat gold thread, wrapped gold thread uses a thread that has a thinner and wider. Through this analysis, even making of the base of the gold threads was different according to the type. Secondly, we looked into the characteristics of materials according to form structure of the gold thread. After analysis of experiment results, we could know that to attach Korean gold thread, glue and the mixture of materials such as Red soil(朱土) was also added. The kinds of the base of gold threads were identified as paper, leather and intestines. Among those materials, for paper, Korea's Dakji, China's Sangpiji(桑皮紙) and Jukji(竹紙) and Japan's Anpiji(雁皮紙) seemed to have all been used, so because of the difference among countries, we can prove that Korea has also produced gold thread. By looking at the research, the base of gold threads and making features hugely vary according to the area.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.249-254
• /
• 2021

This study is about the class model that can demonstrate the modeling ability using the spatial perception capability on basic modeling required for jewelry design majors and the most important perspective method in jewelry design. The outputs were obtained by presenting the topics for creative activities to students after theoretical explaining how to present a spatial sense and presenting practical classes on basic shapes, stereoscopic shapes and perspective methods. While the existing basic molding classes were only practical classes, this study presented students with a class model that allows them to use creativity, basic perspective, and spatial sense together. And it was found out evaluation method that both students and professors can relate to each other through the intensive education effects and clear evaluation standards. I hope that this paper will continue to study more diverse materials and convergent class models.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.227-233
• /
• 2019

In order to suggest the utilization measures suitable of the 4th industry and design right in the management of jewelry company and also applying it to Korean jewelry industry, Also, the current status of Korean jewelry industry and design right was researched. Based on the theoretical background, the hypotheses were set up. After conducting a survey on the 4th industry, design right, management mind, and management intention targeting jewelry industry workers focusing on the set-up hypotheses. In the results The job currently working for in the jewelry industry and the job desired in the future were the design with the highest ratio, so that the importance of design was high in Korean jewelry industry. Also, design was the first priority of management mind, important elements of jewelry industry management, and successful management strategy while technology showed a bit less importance than factors of marketing, capital, and personal connections.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.189-194
• /
• 2019

This thesis aimed to apply the 3D-printing technology rapidly introduced to the overall industry to jewelry design. In the results of examining preceding researches, out of 3D-printing methods, the FMD method was used the most in design area. However, for jewelry design, the 3D-printing is used for casting process out of production processes, so that the printing method is not FMD, but DLP. Thus, the researcher examined the material functions and applicability of jewelry design through research works, by applying the 3D-printing in DLP method to jewelry design. In the results, brooches were completed by applying the 3D-printing to the jewelry design with no casting process, and then utilizing enamel and pure silver together. Producing light and solid completed products in various colors, they were verified as applicable materials. Also, as the size and form of curved design mainly used for non-geometric jewelry design could be accurately predicted through Rhino CAD, diverse possibilities of advancement to be easily used for the development of formative form of jewelry design in the future were revealed.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.219-223
• /
• 2021

This study aims to present a non-face-to-face teaching methodology for the theory and practical lessons of design majors, especially for the arts and sports field. It was conducted to improve the existing teaching models after the non-face-to-face online lectures which began with COVID-19. Various existing smart learning methods such as online classes, interactive classes, and flip learning were reviewed, and a method to efficiently manage practical skills by supplementing the shortcomings of each study was suggested. 4 stages of teaching development - setting a teaching method, teaching progress, evaluation, and follow-up management-were designated and applied to the class of design majors. The result showed that it is effective in terms of teaching method and progress; however, the limitations of non-face-to-face classes were found in the stages of evaluation and follow-up management. Therefore, it is expected that further research on evaluation and follow-up management, such as specific practical instruction methods is required to improve completion.

• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.219-224
• /
• 2022

This study is to propose a alternative gem that is expressed in various ways instead of jewelry with limited output. It was investigated what materials were used in the alternative gem used in the jewelry design thesis over the past five years. In addition, as a result of a survey to understand the needs of customers, it was found that customers also use resin among resins as an alternative gem, like as research trends. Based on this, the scope of resin use as a alternative gem was expanded and applied to jewelry design rather than the existing method of using resin. As a result, it was found out a various uses of resin as an alternative gem. However, the demand and traditionality that correspond to the conditions of jewelry remain challenges to be established through various jewelry design studies in the future. Therefore, in order to utilize the popular preference of alternative gem, continuous research on applying jewelry design to alternative gem should be continued.