• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.1-8
• /
• 2019

The demand and importance of adhesives and paint coatings applied to solid surfaces such as metals, ceramics, and plastics are increasing. In this study, the influencing factors on the adhesive strength between the polymer coating and the metal adherend were investigated by Dolly test when the adhesive or the paint coating was applied on the metal adherend. Two-component epoxy adhesive was used as the adhesive, and EH2350, a two-component epoxy paint for anti-corrosion, was used as the paint. Especially, the effect of adherend metals(Al, Fe, STS, Cu, Zn), surface roughness and surface contamination(tap water, salt water) on adhesive strength was studied as influencing factors. The adhesive strength between adhesive and adherend was different when the type of metal adherend was different even when the same adhesive was used. It was found that spray water cleaning was necessary before the paint coating process on the surface of the oxide contaminated adherend with tap water or salt water. As a result of this study, it was confirmed that Dolly test can be widely used in the future to measure adhesive strength between paint coating and adherend.

• Journal of agricultural medicine and community health
• /
• v.21 no.1
• /
• pp.85-95
• /
• 1996

To examine the contamination in Ulsan coastal area, some heavy metal concentrations in sea water and Mytilus coruscus have been measured. Sea water samples were collected on April 6 in 1995 and Mytilus coruscus samples were collected on April 2 in 1995. Total number of sea water samples was 26 and that of Mytilus coruscus was 54. The sites where the samples collected were same in sea water and Mytilus coruscus. The method of analysis was atomic absorption spectrophotometer. The results indicated that the heavy metal concentrations of sea water were varied according to the sampling stations. The concentrations of cadmium, manganese, zinc in sea water collected in the coastal area near Mipo complex were higher than those of other coastal areas, and the concentrations of lead in sea water collected in the coastal area near petrochemical complex were higher than those of others. In general the concentrations of lead, zinc, copper in sea water were proportionate to those in Mytilus coruscus. The mean concentration rates of lead, cadmium, manganese in Mytilus coruscus inhabiting in Ulsan coastal area were similar, 1070, 1370 and 1300, respectively. The concentration rate of mercury was 80, the lowest value of other heavy metals, and that of copper was 6940, the highest value. Consequently it seems to be more desirable to use Mytilus coruscus as a sample to examine the contamination of coastal area than sea water.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.328-336
• /
• 2008

Metal mining district drainage is a well recognized source of environmental contamination. Oxidation of metal sulfides produces acidic and metal-rich waters that contaminate local surface water and ground water in mines, mine dumps, and tailing impoundments. This monitoring study was carried out to investigate the stream water quality and pollution as affected by the Sambo mine drainage in relation to the relative distance from the mine. It obvious that pH values of the mine drainage ranged from 5.8 to 6.9, while the average concentrations of the dissolved chemical constituents for EC, $SO_4^{2-}$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$ were $1.77\;dS\;m^{-1}$, 929, 14.6, 263.3, and 46.9 mg/L in mine drainage discharged from the main waste rock dumps (WRD), respectively. Furthermore, EC values and sulfate concentrations exceeded the critical toxicity levels in agricultural water for rice plant ($1.0\;dS\;m^{-1}$ for EC and 54.0 mg/L for $SO_4^{2-}$). Also, the average of dissolved cadmium concentrations ($0.016{\sim}0.021\;mg/L$) was higher than water quality standard (0.01 mg/L) for agricultural water in Korea, in addition to Zn, Fe and Mn were higher than trace metals maximum concentrations which recommended by FAO for irrigation water. The results indicate that mine drainage discharged from the Sambo mine affected stream water at least to distance of 1 km downstream of the mine water discharge point. EC values, $SO_4^{2-}$ and $Ca^{2+}$ concentrations in discharged water positively correlated with dissolved Cd, Zn, Al and Mn concentrations, while the pH values negatively correlated. In addition, EC values, $SO_4^{2-}$ and $Ca^{2+}$ concentrations were negatively correlated with pH values.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.20-34
• /
• 2006

This study was undertaken to assess the anthropogenic impact on trace metal concentrations (Zn, Cu, Pb, Cr, Ni, and Cd) of roadside sediments (N = 70) from No.7 national road within the watershed of Hoidong Reservoir in Pusan City and to estimate the potential mobility of selected metals using sequential extraction. We generally found high concentrations of metals, especially Zn, Cu and Pb, affected by anthropogenic inputs. Compared to the trace metal concentrations of uncontaminated stream sediments, arithmetic mean concentrations of roadside sediments were about 7 times higher for Cu, 4 times higher for Zn, 3 times higher for Pb and Cr and, 2 times higher for Ni and As. Speciation data on the basis of sequential extraction indicate that most of the trace metals considered do not occur in significant quantities in the exchangeable fraction, except for Cd and Ni whose exchangeable fractions are appreciable (average 29.3 and 25.8%, respectively). Other metals such as Zn (51.4%) and Pb (45.2%) are preferentially bound to the reducible fraction, and therefore they can be potentially released by a pH decrease and/or redox change. Copper is mainly found in the organic fraction, while Cd is highest in the exchangeable fraction, and Cr and Ni in the residual fraction. Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Cd>Ni>Pb>Zn>Cr>Cu. Although the total concentration data showed that Zn was typically present in potentially harmful concentration levels, the data on metal partitioning indicated that Cd, Ni and Pb pose the highest potential hazard for runoff water. As potential changes of redox state and pH may remobilize the metals bound to carbonates, amorphous oxides, and/or organic matter, and may release and flush them through drain networks into the watershed of Hoidong Reservoir, careful monitoring of environmental conditions appears to be very important.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.69-76
• /
• 2015

BACKGROUND: Contamination of soils by heavy metals is the serious environmental problem. In particular, industrial processing is one of the main sources of heavy metal contamination. The objective of this study was to investigate the distribution characteristics of heavy metals in soils collected from industrial complex. METHODS AND RESULTS: In this study, the soil contamination and enrichment factor (EF) of heavy metals were investigated in three national industrial complexes such as Yeosu, Ulsan and Sihwa Banwal industrial complexes. The target heavy metals includes Cd, Cu, As, Hg, Pb, Cr, Zn, and Ni. The results showed that the contents of Cd, Hg, Pb, Zn and Ni in Yeosu and the contents of Cu, As and Cr in Sihwa Banwal were higher than in any other industrial complex. The results of principal component analysis(PCA) in Yeosu, Ulsan and Sihwa Banwal complex could be explained up to approximately 81.4, 69.1 and 70.9% by two factor, respectively. Enrichment factors of Cd, Pb and Zn in all the investigated industrial complexes were above 1.0 that was the value judged to be a high contamination. And EF of Cr was above 1.0 in Sihwa Banwal complex. EF of Zn in all sites was generally high from the other heavy metals. CONCLUSION: Therefore, soils maybe significantly affected by heavy metals (especially, Cd, Pb and Zn) present in the emissions from industrial complexes.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.439-447
• /
• 2004

The purpose of this study was to investigate the influence of water, saliva and blood contamination on the bonding strength of metal brackets with a self-etching primer/adhesive to enamel. Ninety-six extracted human teeth were divided into four groups. The brackets were bonded to enamel with a self- etching primer (3M/Unitek Dental Products. Monorovia California) according to one of four protocols. The teeth were bonded in a dry condition (group D) or in contamination with distilled water (group W), artificial saliva (group S). or fresh human blood (group B) Shear bond strengths were tested using an Instron Universal testing machine. After debonding. bracket and tooth surfaces were examined with a stereomicroscope. In each group, four samples were selected and examined with a Scanning electron microscope of the prepared enamel surface and resin-enamel interlace. The results obtained were summarized as follows: Shear bond Strength if group D $(15.22{\pm}2.86MPa)$ and W $(15.20{\pm}3.85 MPa)$ Were higher than in group B$(12.56{\pm}2.94MPa)$ (p<0.05). There were no statistical differences in the shear bond strengths between groups D. W and S (p>0.05). There was a tendency to have less residual adhesive remaining on the enamel surfaces of group B than group D. The SEW morphology of group D and W showed a more roughened etching pattern than group S and B. Water or saliva contamination on bending of orthodontic brackets with Transbond plus self etching primer had almost no influence on bond strength In this study, the blood contaminated group showed the lowest bond strength, but it was above the clinically acceptable bond strength (5.9-7.8 MPa, Reynold, 1975). The results of this study suggest that acceptable clinical bond strengths can be obtained in wet conditions when self-etching adhesives are used.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.566-574
• /
• 2022

Heavy metals are one of the dangerous pollutants that threaten urban biodiversity due to their accumulation over a long period without being decomposed in vivo. Accordingly, there is a need for biological monitoring to compare accumulation concentrations in living organisms according to the degree of heavy metal exposure to evaluate heavy metal contamination in the air in urban areas. This study aims to examine the possibility of using nesting materials as heavy metal monitoring samples and determine the effects of heavy metals on Paridae. We installed 54 artificial nest boxes in the research areas that included campus green spaces (14), urban forests (11), and urban parks (29) on a university campus in Cheonan City, Chungcheongnam Province. The birds' use rate of artificial nest boxes was 11/14 (78.57%) in campus green spaces, 8/11 (72.72%) in urban forests, and 6/29 (20.68%) in urban parks. Moss materials were collected from collected nests, and the heavy metal accumulation characteristics of each type of urban green space and the effects of heavy metals on the success of fledging of Paridae were compared through heavy metal analysis. The analysis showed that the average concentrations of zinc and lead were 228.08±209.62 ㎍/dry g and 17.67 ± 6.72 ㎍/dry g, respectively. There was no significant difference in zinc concentration for each type of urban green space (Kruskal-Wallis test, p-value=0.28), but lead concentration showed a significant difference (Kruskal-Wallis test, p<0.05^*). Of the 21 Paridae, nests analyzed for heavy metals, fledging of birds was observed in 11 nests (52.38%). Fledging of birds observed in each urban green space type was 7 campus green spaces (77.78%), 6 in urban forests (85.71%), and 1 in urban park (20%), mainly in urban forests and green spaces on campus. Heavy metal concentrations were compared to check the effect of heavy metal accumulation on the successful fledging of Paridae, but there was no statistically significant difference (Zn: W=44, p-value=0.74, Pb: t=0.64676, df =7.2422, p-value=0.54). This study is a basic study using the nesting materials of Paridae as heavy metal monitoring samples, and it is determined that it can be used as basic data for non-invasive biological monitoring.

• Advances in environmental research
• /
• v.2 no.3
• /
• pp.245-260
• /
• 2013

Biosorption represents a technological innovation as well as a cost effective excellent remediation technology for cleaning up radionuclides from aqueous environment. In the present study, a bacteria strain FB12 with high adsorption rate of uranium ion was isolated from the vicinity of the nuclear power plant. It was tentatively identified as Bacillus sp.FB12 according to the 16S rDNA sequencing. Efforts were made to further improve the adsorption rate and genetic stability by UV irradiation and UV-LiCl cooperative mutagenesis. The improved strain named Bacillus sp.UV32 obtains excellent genetic stability and a high adsorption rate of 95.9%. The adsorption of uranium U (VI) by Bacillus sp.UV32 from aqueous solution was examined as a function of metal ion concentration, cell concentration, adsorption time, pH, temperature, and the presence of some foreign ions. The adsorption process of U (VI) was found to follow the pseudo-second-order kinetic equation. The adsorption isotherm study indicated that it preferably followed the Langmuir adsorption isotherm. The thermodynamic parameters values calculated clearly indicated that the adsorption process was feasible, spontaneous and endothermic in nature. These properties show that Bacillus sp.UV32 has potential application in the removal of uranium (VI) from the radioactive wastewater.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.3
• /
• pp.217-221
• /
• 2004

[ $CO_2$ ]laser ablation rates for bulk 4H-SiC substrates and GaN/AIN/SiC templates in the range 229-870 ${\mu}m.min^{-1}$ were obtained for pulse energies of 7.5-30 mJ over diameters of 50·500 ${\mu}m$ with a Q-switched pulse width of ${\sim}30$ nsec and a pulse frequency of 8 Hz. The laser drilling produces much higher etch rates than conventional dry plasma etching (0.2 - 1.3 ${\mu}m/min$) making this an attractive maskless option for creating through-wafer via holes in SiC or GaN/AlN/SiC templates for power metal-semiconductor field effect transistor applications. The via entry can be tapered to facilitate subsequent metallization by control of the laser power and the total residual surface contamination can be minimized in a similar fashion and with a high gas throughput to avoid redeposition. The sidewall roughness is also comparable or better than conventional via holes created by plasma etching.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3393-3402
• /
• 2013

The increasing scourge of cancer epidemiology is a global concern. With WHO emphasizing that 40% of all cancer cases are preventable, exposure to known and suspected carcinogens must be discouraged. The battle with communicable diseases and other third world challenges has greatly de-emphasized anti-cancer campaigns in sub-Saharan Africa. The abundant deposit of mineral resources in sub-Saharan Africa has attracted high mining activity with its negative environmental aftermath. Poor regulatory mechanisms have led to environmental contamination by products of mining including heavy metals. In addition to poor urban planning, the springing up of settlements in industrial areas has led to generation and exposure to more hazardous wastes consequent on poor disposal systems. Studies establishing close association between exposure to heavy metals and cancer epidemiology in sub-Saharan Africa are increasing. The current review assesses the level of environmental pollution by heavy metals in sub-Saharan Africa, and brings to the fore available evidence implicating such in the increasing cancer epidemiology in the sub-continent.