• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.368-371
• /
• 2001

In this paper, the experiment and simulation results of the Boost converter for PFC(power factor correction) using metal powder inductor are presented. The metal powder inductor used in the experiment was composed of Ni-Fe-Mo, Ni-Fe, Fe-Si-Al compound respectively The performance of the 500w class PFC rectifier with the average current mode control and the 300W class PFC rectifier with the variable frequency control, are evaluated.

• Journal of Welding and Joining
• /
• 제13권1호
• /
• pp.103-114
• /
• 1995

Plasma Transferred arc(PTA) hard facing process has been developed to obtain an overlay weld metal having excellent wear resistance. The effect of Ti, TiSi$_{2}$ and TiC powders addition on the surface of Aluminum alloy 5083 has been investigated with PTA process. This paper describes the result of test the performance of the overlay weld metal. The result can be summarized as follows 1. Intermetallic compound is formed on surface of base metal in Ti or TiSi$_{2}$ powder but the reaction with surface of base metal is little seen in TiC powder. 2. In formation of composite layer on aluminum alloy surface by plasma transferred arc welding process, high melting ceramics like TiC powder is excellent. 3. The multipass welding process is available for formation of high density of powder. But the more number of pass, the less effect of powder, it is considered, and limits of number of pass. 4. By increasing area fraction of TiC powder on Al alloy surface, in especially TiC powder the hardness increase more than 40% area fraction and 88% shows about Hv 700.

• Corrosion Science and Technology
• /
• 제10권1호
• /
• pp.24-29
• /
• 2011

The greatest purpose of chromate treatment is to improve anti-corrosion by stabilizing a metal surface. Because metal surface forms a compound by absorbing oxygen or water in the air by being generally unstable, it is necessary to improve anti-corrosion of the metal by forming the metal surface with a stable film. When considering the economical efficiency and requirements together because the film of the metal surface treated with chromate has good anti-corrosion and the stability also in the air by being compact and strong, Chromate treatment has been used most up to the electronics industry from the auto industry. However, these days, because hexavalent chromium is both a toxic agent to be able to cause cancers and deadly poisonous environmental pollutant, the strong legal controls on its use is being imposed all over the world. Because of this reason, a new anti-corrosion method is being required. Also, by users' various demands, the passivations that have recently been developed require various characteristics such as conductivity, chemical resistance, alkali cleaning resistance as well as anti-corrosion. We could confirm the results such as excellent anti-corrosion compared to chromate, conductivity, chemical resistance and detergent resistance as the result of analysis of various characteristics of the galvannealed sheet steels coated with Cr-Free solution developed in this research.

• 한국세라믹학회지
• /
• 제45권3호
• /
• pp.161-166
• /
• 2008

The multi-films of a metallic film and a transparent conducting oxide (TCO, indium-tin oxide, ITO) film were formed on the stainless steel 316 and 304 plates by a sputtering method and an E-beam method and then the external metallic region of the stainless steel bipolar plates was converted into the metal nitride films through an annealing process. The multi-film formed on the stainless steel bipolar plates showed the XRD patterns of the typical indium-tin oxide, the metallic phase and the metal substrate and the external nitride film. The XRD pattern of the thin film on the bipolar plates modified showed two metal nitride phases of CrN and $Cr_2N$ compound. Surface microstructural morphology of the multi-film deposited bipolar plates was observed by AFM and FE-SEM. The metal nitride film formed on the stainless steel bipolar plates represented a microstructural morphology of fine columnar grains with 10 nm diameter and 60nm length in FE-SEM images. The electrical resistivity of the stainless steel bipolar plates modified was evaluated.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.142-146
• /
• 2007

Vacuum brazing method has been coming to an important process as one of the new fabricating techniques of metals and alloys. In this study, a vacuum brazing of SUS304 stainless steel with BNi-2 filler metal was carried out in $1{\times}10^{4}$ Torr of vacuum atmosphere. The formation of brittle intermetallic compounds in brazed joints between SUS304 stainless steel and BNi-2 filler metal is a major concern, since they considerably degrade the mechanical properties of joints. To obtain enough stable joining strength, it is necessary to understand the unique properties of brazing process with Ni-based filler metals containing boron. So, in this research we investigated the performance of SUS304/BNi-2 brazed system and the brazed joint properties were evaluated at room temperature by using tensile test. Metallurgical and fractographic analysis were used to characterize the microstructure, the mechanisms of brazing, and joint failure modes.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.49-58
• /
• 2013

A selected halogenated organic contaminant, monochlorophenol was successfully degraded by photocatalytic reaction in a circulating batch system. The photocatalytic degradation in most cases follows first-order kinetics. The photocatalytic reaction rate increased in the $TiO_2$ dosage range of 0.1 g/L to 0.4 g/L, then decreased with further increase of the dosage. Also the degradation rate increased over the range of the retention time from 0.49 min. to 0.94 min., then decreased with further increase of the retention time in the circulating batch reactor. The photocatalytic activity was enhanced by addition of metal impurities, platinum(Pt) and palladium(Pd) onto the photocatalysts. The photocatalytic degradation rate increased with the increase of Pt and Pd in the content range of 0 to 2wt %, then decreased with further increase of the metal contents. Therefore the metal loading to $TiO_2$ influence the degradation rate of a halogenated organic compound by acting as electron traps, consequently reducing the electron/positive hole pair recombination rate.

• Bulletin of the Korean Chemical Society
• /
• 제13권5호
• /
• pp.542-546
• /
• 1992

New silicon-monosubstituted (${\eta}^4$-2,3,4,5-tetraphenyl-1-silacyclopentadiene)transi tion metal complexes are described. The new (silole-transition metal complex)Fe$(CO)_3$ was obtained from the reaction of silole-tansition metal complex and Fe$(CO)_5$. We have determined the crystal structure of (${\eta}^4$-exo-cyclopentadienyldicarbonyliron-endo-1-meth yl-2,3,4,5-tetraphenyl-1-silacyclopentadienyl)tric arbonyliron by using graphitemonochromated Mo-$K_{\alpha}radiation. The compound was crystallized in the monoclinic space group $P2_1$/c with a = 8.925(1), b = 18.689(3), c = 19.930(3) ${\AA}$, and ${\beta}$ = 102.02$(1)^{\circ}$. The iron moiety CpFe$(CO)_2$ on silicon is in an axal position. The (silole-transition metal complex) Fe$(CO)_3$ was also prepared through the reaction of (${\eta}^4$-1-chloro-2,3,4,5-tetraphenylsilacyclopentadiene) Fe$(CO)_3$ and metal complex nucleophile. The structure configuration was studied by conventional spectroscopy.

• 한국결정학회지
• /
• 제7권1호
• /
• pp.57-63
• /
• 1996

Titanium (III) pyrophosphate 화합물인 KTiP2O7을 합성하고 X-선 회절법으로 그 결정구조를 해석하였다. 이 물질은 단사정계의 P21/a 공간군으로 결정화되었고 a=8.210(3), b=10.292(2), c=7.434(1)Å, β=106.71(2)°인 단위 세포 상수를 갖는 세포에 4개의 분자식을 포함하고 있다. 이 물질의 구조는 모서리를 공유하고 있는 TiO6 팔면체와 pyrophosphate group(P2O74-)으로 형성된 framework로 구성되었으며 이 결과 형성된 tunnel 안에 K+ 양이온이 존재한다. KTiP2O7은 KAlP2O7 및 RbTiP2O7 등 다른 금속 pyrophosphate 화합물과 유사한 구조를 갖고 있으나 alkali metal들의 크기에 따라 구조의 변화가 초래된다. 이 물질은 [K+][Ti3+][P2O74-]의 식으로 표시 할 수 있다.

• 한국응용과학기술학회지
• /
• 제35권1호
• /
• pp.173-185
• /
• 2018

화학 관능기가 다른 지방산 에스터계, 지방산 금속염 및 아마이드계 분산 및 흐름개선 첨가제가 EPDM과 카본블랙을 충전제로 사용한 고무 배합물의 가류 특성과 가류된 고무 배합물의 기계적 물성 및 노화특성에 미치는 영향을 무니점도계, 레오미터, 경도계, 만능재료시험기 등을 이용하여 측정하였다. $125^{\circ}C$에서 측정된 무니점도는 아마이드계 > 금속염계 > 에스터계 첨가제의 순으로 감소하는 경향을 보였으며, 스코치시간은 에스터계와 금속염계 첨가제는 첨가 유무에 따라 거의 차이가 없거나 조금 늦어지며, 아마이드계 첨가제는 1분 이상 빨라졌다. $160^{\circ}C$에서의 레오미터 측정 결과 가류시간은 금속염계와 아마이드계 첨가제의 경우는 가류반응이 빨리 진행되었다. 델타토크 값은 금속염계와 아마이드계 첨가제가 있는 경우 전반적으로 증가하였으나, 에스터계 첨가제가 있는 경우는 약간 감소하였다. EPDM 배합물의 인장강도는 에스터계 첨가제가 첨가된 경우 크게 향상되었으며, 아마이드계와 금속염계 첨가제의 경우는 큰 영향이 없었다. 신율의 경우는 금속염계 첨가제의 경우 크게 향상되었으며, 나머지의 경우는 큰 영향이 없었다. 인열강도는 첨가제의 첨가에 따라 전반적으로 상승하였으며 금속염계 첨가제의 경우에서 확연히 상승하였으며 경도는 첨가제의 종류와 상관없이 유사한 값을 나타내었다. $100^{\circ}C$에서 24시간 열노화시킨 EPDM 배합물은 금속염계와 아마이드계 첨가제의 경우는 거의 변화가 없었으며 신율의 변화는 첨가제를 함유한 모든 EPDM 배합물이 10-20% 정도 감소하는 경향을 보였다.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.1-6
• /
• 2003

The new class of $Gd_5(Si_xGe_{1-x})_4$ compounds undergoes a simultaneous magnetic/structural phase transition giving a high level of strain that can be induced either by change in temperature or by application of a magnetic field. Profound changes of structural, magnetic, and electronic changes occur in the $Gd_5(Si_xGe_{1-x})_4$ system lead to extreme behavior of the material such as the giant magnetocaloric effect, colossal magnetostriction, and giant magnetoresistance. These unique material characters can be utilized for various applications including magnetic solid refrigerants, sensors, and actuators.