• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• 자원리싸이클링
• /
• 제20권3호
• /
• pp.12-27
• /
• 2011

일본의 주요 비철제련소는 100년 이상의 오랜 역사를 가지고 있으며 환경 리싸이클링산업을 주도하고 있다. 이러한 배경에는 오랫동안 배양된 비철제련 프로세스와 환경오염 방지의 고도화된 전문기술과 기술개발력이 기초가 되고 있다. 일본의 도시광산 재자원화산업은 고부가가치 자원의 회수와 유해폐기물 처리의 통합된 비즈니스로 전개되고 있다. 최근 도시광산으로서 E-waste(폐휴대전화, PC 등)의 비중이 높아지고 있다. 레어메탈 등의 유가금속과 유해물질을 함께 함유하고 있는 E-waste의 처리에는 비철제련(특히 복잡황화광)의 고도 분리 정제기술의 이용이 절대적이다. 이러한 관점에서 동화(同和)그룹의 리싸이클 콤비나트, JX일광(日鑛)그룹의 일광환경(日鑛環境) + HMC의 리싸이클시스템과 리싸이클기술은 무한 경쟁력을 가지고 있으며, E-waste의 회수시스템 구축이 중요과제로 대두되고 있다.

• 대한화학회지
• /
• 제35권6호
• /
• pp.645-652
• /
• 1991

몇 가지 전이금속이온(Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), Zn(Ⅱ)) 및 후전이금속이온(Cd(Ⅱ), Hg(Ⅱ), Pb(Ⅱ))과 $N_2O_3$계 거대고리 리간드인 1,15-diaza-3,4 : 12,13-dibenzo-5,8,11-trioxacyclooctadecane 사이에 형성되는 착물의 안정도 상수를 수용액에서 전위차 적정법으로 결정하였다. 각 착물의 안정도 상수$(logK_f)$는 $25^{\circ}$C에서 Co(Ⅱ): 3.83, Ni(Ⅱ) : 4.56, Cu(Ⅱ) : 7.74, Zn(Ⅱ) : 4.98, Cd(Ⅱ) : 3.91, Hg(II) : 14.87, Pb(Ⅱ) : 6.65이었다. 전이금속착물의 안정도 순위는 Williams-Irving 서열인 Co(Ⅱ) < Ni(Ⅱ) < Cu(Ⅱ) < Zn(Ⅱ)와 일치하였고, 후전이금속착물의 안정도는 Cd(Ⅱ) < Pb(Ⅱ) < Hg(Ⅱ)이 순위이었다. 한편 메탄올 용액에서 자외-가시선이온과 리간드가 1:1인 조성을 가졌으나, Ni(Ⅱ), 착물은 1:1과 1:2 두 가지 조성을 가질 수 있음을 알았으며, 또 디메틸술폭시드 용액에서 $^1H-$와 $^{13}C-$핵자기공명스펙트럼을 분석하여 후전이금속이온 착물은 주로 리간드의 질소원자가 결합에 기여함을 알았다. Cu(Ⅱ)와 Zn(Ⅱ)이 고체착물은 원소분석, 전기전도도, 자화율 측정, 자외-가시선 및 적외선 스펙트럼분석 등으로 Cu(Ⅱ) 착물은 일그러진 팔면체, 그리고 Zn(Ⅱ) 착물은 사면체 구조를 이루고 있는 것으로 예측되었다.

• 한국환경농학회지
• /
• 제7권2호
• /
• pp.96-101
• /
• 1988

Ionic strength 및 공존(共存) 음(陰)Ion($Cl^-$, $SO^{2-}\;_4$, $ClO^-\;_4$)이 Zeolite에 의(依)한 중금속(重金屬)의 흡착(吸着)에 미치는 영향(影響)을 조사(調査)한 결과(結果)는 다음과 같다. Ionic strength별(別) Zeolite에 의(依)한 Cd, Cu 및 Zn의 흡착등온선(吸着等溫線)은 Freundlich 식(式)에 잘 부합(符合)되었다. Ionic strength가 증가(增加)할수록 중금속(重金屬)의 흡착량(吸着量)은 3종(種)의 서로 다른 음(陰)Ion이 공존(共存)하여도 모두 감소(減少)하는 경향(傾向)이었다. Background salt의 음(陰)Ion 종류별(種類別) 중금속(重金屬) 흡착량(吸着量)은 $ClO^-\;_4>SO^{2-}\;_4>Cl^-$의 순(順)이었으며 흡착평형용액내(吸着平衡溶液內)에서 음(陰)Ion은 Ligand로 작용(作用)하여 중금속(重金屬) Ion들과 Complex를 형성(形成)하는 능력(能力)에 차이(差異)가 있음이 인정(認定)되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4321-4326
• /
• 2011

A new series of heteroleptic cyclometalated iridium(III) complexes has been synthesized and characterized by absorption, emission and cyclic voltammetry studies: $(pqx)_2Ir(acac)$ (1), $(dmpqx)_2Ir(acac)$ (2) and $(dfpqx)_2Ir(acac)$ (3) where pqx=2-phenylquinoxalinate, dmpqx=2-(2,4-dimethoxyphenyl)quinoxalinate, dfpqx=2-(2,4-difluorophenyl) quinoxalinate and acac=acetylacetonate anion. The reaction of excess acetylacetone with ${\mu}$-chloride-bridged dimeric iridium complex, $[(C\^N)_2Ir({\mu}-Cl)]_2$, gives a complex 1 and an unusual hydridoiridium(III) complex, $(pqx)IrH(acac)_2$ (4). The complex 1, 2 and 3 show their emissions in an orangered region (${\lambda}_{PL,max}$ = 583-616 nm), and the emission maxima can be tuned by the change of substituent at phenyl ring of 2-phenylquinoxaline ligand. The phosphorescent line shape indicates that the emissions originate predominantly from $^3MLCT$ states with little admixture of ligand-based $^3({\pi}-{\pi}^*)$ excited states. The structures of complex 3 and 4 are additionally characterized by a single crystal X-ray diffraction method. The complex 3 shows a distorted octahedral geometry around iridium(III) metal ion. A strong trans influence of the phenyl ring is examined. In complex 4, there are two discrete molecules which are mirror images each other at the ratio of 1:1 in an unit cell. We propose that the phosphorescent complex 1, 2 and 3 are possible candidates for the phosphors in OLEDs applications.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.473-482
• /
• 2012

A novel malemide epoxy containing Co(II), Ni(II) and Cu(II) ions have been synthesized by curing malemide epoxy resin (MIEB-13) and Co(II), Ni(II) and Cu(II) complexes of macrocyclic bis-hydrazone Schiff base. The Schiff base was synthesized by reacting 1,4-dicarbnyl phenyl dihydrazide with 2,6-diformyl-4-methyl phenol. The Schiff base and its Co(II), Ni(II) and Cu(II) complexes have been characterized by elemental analyses, spectral (IR, $^1H$ NMR, UV-vis., FAB mass, ESR), thermal and magnetic data. The curing reaction of maleimide epoxy compound with metal complexes was studied as curing agents. The stability of cured samples was studied by thermo-gravimetric analyses and which have excellent chemical (acid/alkali/solvent) and water absorption resistance. Further, the scanning electron microscopy (SEM) and definitional scanning colorimetric (DSC) techniques were confirmed the phase homogeneity of the cured systems.

• 소성∙가공
• /
• 제26권2호
• /
• pp.79-86
• /
• 2017

In this study, the sheet metal forming process of the brake chamber head, which had a complex shape compared to the conventional head part, was investigated using finite element (FE) analysis. In order to prevent the forming failures such as necking and fracture, the multi-stage forming process was introduced. The forming process consisted of three steps: (1) first drawing, (2) second drawing, (3) final forming. Experimental and FE simulated results of the brake chamber head were compared, and the results showed that the required characteristics of the straightness and the wall thickness at each location were satisfied.

• 천문학회보
• /
• 제38권2호
• /
• pp.62.2-62.2
• /
• 2013

Recent spectroscopic observations have provided evidence for complex chemical evolution by supernovae and/or asymptotic giant branch (AGB) stars in the two metal-poor globular clusters (GCs) NGC2419 and M15. In particular, the horizontal branches (HBs) of these metal-poor GCs are very extended in the Hertzsprung-Russell diagram. The origin of these peculiar features, as well as that for the Sandage period-shift effect observed in these clusters, are yet to be understood. Here we show, by constructing population models including the Nitrogen enhanced subpopulation, that the second generation populations in these clusters would be enhanced not only in Helium, but also in Nitrogen. This working hypothesis can simultaneously explain the observed extended feature on the HB and the period-shift of RR Lyrae variables.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 추계학술대회논문집
• /
• pp.18-21
• /
• 1999

The wrinkling of thin sheet metal induced by compressive instability is one of major defects in sheet metal forming processes. compressive instability is influence by many factors such as mechanical properties of the sheet material geometry of the sheet contact conditions and plastic anisotropy. The analysis of compressive instability in a plastically deforming body is rather difficult because the effects of the above-mentioned factors are rather complex and the instability behavior may show swide variations even for small deviations of the factors. in this work the bifurcation theory is introduced for the finite elemental analysis of the instability behavior of a thin sheet with initially sound geometry and property. All the above-mentioned factors are conveniently considered by the finite element method. The instability limit is found by introducing a criterion scheme into the incremental analysis and the post-bifurcation behavior is analyzed by introducing the branching scheme. Wrinkling initiation and growth in the deep drawing process are analyzed.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.489-495
• /
• 2015

Forging is a manufacturing process involving the shaping of metal using localized compressive forces and the process of deforming metal into a predetermined shape using certain tools and press according to the temperature. Forging provides stronger metal parts than that possible by casting or machining. Conventional clutch jaw parts have been developed through cold forging and precision machining; however, fabrication of integral clutch jaw parts for farm machinery has not been reported yet. These parts were developed by applying a complex forging technology combining cold and hot forging. The integrated forming technology proposed in this study will be useful for reducing the lead-time for manufacturing, improving the accuracy of products, and eliminating the welding process.