• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.333-336
• /
• 2008

As the high-rise building increase due to the gravitation of population to big cities recently, it requires high quality and high performance of Concrete. As a result, people are keenly interested in Meta-kaolin as new admixture favorable from an economic perspective, which has strength and endurance with admixture at the same level like Silicafume. Accordingly, as to Meta-kaolin, this study was to set by three levels like domestic one, foreign one, and Silicafume, the waterbinding material ratio 25%, and four level substitute like 0, 10, 20, and 30(%) in order to compare and analyze the quality characteristics of high-strength concrete according to the substitute of Meta-kaolin applicable with replacement of Silicafume. As a result of performing experiment, as to the higher the additive amount of Superplasticizing agents in order to secure target liquidity was, the more the substitute in each admixture increased. This study had a tendency that the Silicafume increased the additive amount of Superplasticizing agents with high fineness compared with Meta-kaolin. In addition, the higher the substitute in each admixture was, the more its strength increased On the strength property, the higher the substitute in each admixture was, the more its strength increased. This study has found out that the Meta-kaolin has shown the better strength than the one of Silicafume. On the other hand, the relationship between the Compressive strength and Elastic coefficient has shown the similar formula suggested from ACI363.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2512-2520
• /
• 2013

In this paper, the T-SRR (Triple Split Ring Resonator) using MNG (mu-Negative) meta-material adapted in a low-loss bandpass filter with 3-stages is suggested. The size of the T-SRR in the proposed bandpass filter with low dielectric constant PCB can be easily controlled. And the ${\lambda}/4$ transmission line theory is applied. The proposed T-SRR and filter have the center frequency of 10 GHz with QL value of 184 for military-satellite communication system in I band. The experimental results of the filter show that the insertion and return losses are 1.44 dB and 17.3 dB with bandwidth of 10 %, respectively. The proposed filter will be redesigned by IPD material etc. should be placed here. These instructions give you guidelines for preparing papers for JICCE.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.62-66
• /
• 2008

Spacecrafts such as most of commercial satellites that are operating in the geostationary orbit can be subjected to intense irradiation by charged particles. The surface made of dielectric materials can therefore become probable sites for damaging electrostatic discharges. Thanks to a specially equipped chamber, the spatial environment can be reproduced experimentally in the laboratory. In this paper, the behavior of high energy electrons injected in polymers such as PolyMethylMetaAcrylate (PMMA) and Kapton is studied. Results obtained by surface potential technique, pulse-electro acoustic device and a cell based on the split Faraday cup system are analyzed and discussed.

• Korean Institute of Interior Design Journal
• /
• no.26
• /
• pp.121-128
• /
• 2001

This study deals with 'Sachlichkeit' , as essence of materiality that architectural building materials process, which forms the physical basis for actual building. There have beennu merous researches that deals with various elements that compose architecture, but the emphasis seemed to be concentrated on the meta-physical discussion concerning formal concept. An issue on sachlichkeit as materiality does not necessary mean to mention production process of architecture, rather it is aim of this study to seek possibility to find elements that generate architectural form, through interpreting meaning of materials as substructure generator to make architectural possible. Architectural act can be defined as a process where physical material in life is composed into architecture by the hands of architect. Material used in life is composed into architecture by the hands of architect. Material used in this process basically has neutral characteristic, so 'Sachlichkeit'solely depends on the intentions of architects. This study interprets the intention of architects through the frame of modern-basis proposed by Hilberseimer, and a result architecture is defined as an object projected by architect's subjectivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.744-750
• /
• 2013

In this paper, we proposed new type of an artificial magnetic conductor(AMC) structure, which has a high impedance surface for realizing the meta-material characteristics. The designed AMC structure set a goal of 3.2GHz, and the reflector, which consists of periodically arrayed AMCs is fabricated and measured. The high impedance improves the reflection coefficient, decreases the system size and interference, and increases the antenna performance. The structure has embodied the high impedance by the thickness and relative permitivity of the dielectric substrate and the design configuration without the metallic via hole which connects the AMC to the GND. The bandwidth is 150% broader than the similar AMC structures. Also, the distance between the antenna and the AMC reflector is decreased by ${\lambda}/10$ as working as the metal(PEC) reflectors. The antenna radiation characteristics are 3dB increased at 10mm away from reflector by measurement. The proposed reflector could be inserted in the portable mobile devices, and the antenna's performance has improved by the reflector. The specific absorption rate is dramatically decreased over 94% because the back radiation of the antenna is shielded.

• Korean Journal of Child Education & Care
• /
• v.19 no.3
• /
• pp.1-12
• /
• 2019

Objective: This study aims to thoroughly analyze the correlation effect size between domestic violence and school violence by meta-analyzing previous studies on the correlation between school and domestic violence. Methods: For this purpose, meta-analysis was performed on the selected research material, which consists of national research data collected from various databases from 2001 to April, 2019. 16 thesis and 9 papers on the correlation between school and domestic violence were selected. A random effect model analysis based on the homogeneity examination results was performed on the selected data. Results: The results showed, just as Cohen (1977) proposed, that the correlation effect size between domestic and school violence was 0.25, which is moderate. This is a somewhat lower number than the previous studies on the same subject presented. Of the sub-categories of domestic violence, physical violence and psychological violence appeared to have a correlation effect size of 0.34 and 0.28, respectively, with physical violence showing the highest correlation effect size. Of the types of domestic violence, witnessing spouse violence and experiencing neglect appeared to have a moderate correlation size effect of 0.24. All of these results were statistically significant. Conclusion/Implications: This study utilized meta-analysis as a comprehensive and systematic method to analyze the correlation effect between domestic and school violence. The results presented may lead to discussions on the subject's social implications, limits, and propositions for future studies.

• Journal of Society of Preventive Korean Medicine
• /
• v.13 no.3
• /
• pp.87-99
• /
• 2009

Objectives : The study was to examine the empirical evidence concerning the effects of massage intervention for the laboring women and to investigate the effect sizes related to the characteristics of intervention. Methods : Meta analysis was performed. A total of 11 trials related to massage intervention between 2000 and 2007 were reviewed. Results : Massage intervention showed a beneficial effect on length of labor(1st stage : U=46.75, p=0.00, 2nd stage : U=6.13, p=0.01), perception of childbirth experience(U=12.57, p=0.00), intensity of uterine contraction at the active(U=6.34, p=0.01) and the transition phases(U=24.83, p=0.00), and interval of uterine contraction at the active phase(U=4.83, p=0.03). Massage decreased systolic(U=10.81, p=0.00) and diastolic blood pressure at the transition phase(U=10.60, p=0.00). However, massage had no effect on subjective and objective labor pain and anxiety. No differences were found in effectiveness of massage according to characteristics of intervention(massage material, massager, and massage site) except for anxiety(QB=4.82, p=0.03) and diastolic blood pressure at the active phase by massage site(QB=4.52, p=0.03). Conclusions :We found that massage intervention for the laboring women had an empirical evidence on improving perception of childbirth experience and shortening length of labor. These results should be interpreted with caution due to the lack of studies. More full-scale randomized clinical trials with reliable designs are recommended to further warrant the effectiveness of massage.

• Journal of Ginseng Research
• /
• v.46 no.2
• /
• pp.188-205
• /
• 2022

Panax ginseng is a medicinal plant is a material with various pharmacological activities and research suggests that it is particularly effective in representative metabolic diseases such as hyperglycemia, hypertension, and hyperlipidemia. Therefore, in this study, systematic review and meta-analysis were performed to investigate the comprehensive effect of P. ginseng on metabolic parameters representing these metabolic diseases. A total of 23 papers were collected for inclusion in the study, from which 27 datasets were collected. The investigational products included P. ginseng and Korean Red ginseng. Across the included studies, the dose ranged from 200 mg to 8 g and the supplementation period lasted from four to 24 weeks. The study subjects varied from healthy adults to those with diabetes, hypertension, obesity, and/or hyperlipidemia. As a result of the analysis, the levels of glucose and insulin area under the curves, % body fat, systolic and diastolic blood pressures, total cholesterol, triglycerides, and low-density lipoprotein cholesterol were significantly reduced in the P. ginseng group as compared with in the placebo group. In conclusion, P. ginseng supplementation may act as an adjuvant to prevent the development of metabolic diseases by improving markers related to blood glucose, blood pressure, and blood lipids.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.837-843
• /
• 2008

This paper proposes a power divider based on meta-material structure with dual-band operation. The meta-material structures of left-hand characteristic are constituted of series capacitors and shunt inductors, but they have parasitic series inductance and shunt capacitance effects. There is represented the composite right/ left-handed transmission line (CRLH-TL) model. When the power divider is implemented by using the CRLH-TL, the power divider can operate dual band. To verify the power divider with dual band, we are implemented to operate dual-band that is 0.88 GHz and 1.67 GHz. The characteristics of divider have the return loss less than each 21.0 dB and 15.8 dB and the insertion loss better than 3.83 dB and 3.64 dB at each frequency. Also, the output phase difference is $3{\sim}6^{\circ}$.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2019

Graphene is a fascinating material for fabricating flexible and transparent devices owing to its thickness and mechanical properties. To utilize graphene as a core material for devices, the transfer process of graphene is an inevitable step. The transfer process can be classified into wet and dry methods depending on the surrounding environment. The adhesion between graphene and a target substrate determines the success or failure of the transfer process. As the surface energy of graphene is an important parameter that provides adhesion, it is useful to estimate the surface energy to understand the mechanisms of the transfer process. However, the exact surface energy of graphene is still disputed because the wetting transparency of graphene depends on the polarity of the liquid and target substrate. Previously reported results use graphene transferred by the wet method. However, there are few reports on the surface energy of graphene transferred by the dry method. In this study, the surface energy of graphene transferred by the wet and dry methods is estimated. Wetting transparency occurs for certain combinations of liquids and substrates. For graphene on a polar substrate, the surface energy decreases by 25 and 35% for the wet and dry transfer methods, respectively. However, the surface energy of graphene on dispersive substrates decreases by ~10% regardless of the transfer method. In conclusion, the surface energy of graphene is $36{\sim}38mJ/m^2$, and differs depending on the transfer method and polarity of the substrate.