• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1127-1132
• /
• 1998

The possibilities of producing Al-10%Ti-4%Fe composites through in-situ processing and thus achieving mechanical property improvements over binary Al-10%Ti to a level or higher exhibited by PM SiC/A12124 composites were explored in this study. The microstructure of in-situ processed Al-10%Ti-4%Fe composites was similar to that of Al matrix composites reinforced with discontinuous SiC particulates(SiC/A12124) and significant enhancements in elastic modulus, tensile strength and wear resistance were observed as compared to Al-10%Ti alloy. These results can be attributed to the in-situ formed Al. Fe by third element addition, leading to additional dispersion strengthening effect over $Al_3Ti$ phase reinforcement in Al-Ti system.

• Journal of Korean Biological Nursing Science
• /
• v.23 no.4
• /
• pp.287-297
• /
• 2021

Purpose: This study aimed to evaluate the correlation and agreement of physical activity (PA) between data obtained from wearable Actigraph devices and self-reporting questionnaires, and to investigate the relationship between psychological state (depression, anxiety, and fatigue) and PA. Methods: A descriptive study was conducted using physical measurements and surveys. PA was measured through both the International Physical Activity Questionnaire (IPAQ) and the Actigraph GT3X+ device. The demographic characteristics of the subjects, as well as their depression, anxiety, and fatigue scores, were collected with structured questionnaires. The Spearman's rank correlation coefficient and the Bland-Altman plot method were employed. Results: Data from 36 healthy adults were analyzed. The overall levels of PA measured using the IPAQ and the Actigraph were 1,891.69 MET min/week and 669.96 MET/day, respectively. Total levels of PA did not show a significant correlation between the two measurement methodologies. However, the moderate-intensity PA resulting from the IPAQ scores showed a significant positive correlation with the light-intensity PA recorded by the Actigraph. The Bland-Altman plot analysis demonstrated that the levels of PA as measured by the two different methods did not match. In addition, PA measured using the Actigraph showed a significant negative correlation with depression and anxiety whereas PA measured using the IPAQ showed a significant positive correlation with fatigue. Conclusion: The conclusion of this study is that the data obtained from the subjective self-reporting questionnaire and the wearable Actigraph do not correlate or match in healthy adults. Future research should investigate the relationship between depression and PA intensity through the Actigraph, or other wearable devices equipped with smartphone apps.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.323-327
• /
• 2011

The effects of $Dy_2O_3$ and $Er_2O_3$ co-doping on electrical properties and temperature stability of barium titanate ($BaTiO_3$) ceramics were investigated in terms of microstructure and structural analysis. The dielectric constant and the insulation resistance (IR) of 0.7 mol% $Dy_2O_3$ and 0.3 mol% $Er_2O_3$ co-doped dielectrics had about 60% and 20% higher than the values of undoped one, respectively, and the temperature coefficient of capacitance (TCC) met the X7R specification. The addition of $Dy_2O_3$ contributed to electrical properties caused by increase of tetragonality; however, preferential diffusion of $Dy^{3+}$ ions toward A site in $BaTiO_3$ grain exhibited an adverse effect on temperature stability by grain growth. On the other hand, The $Er_2O_3$ addition in $BaTiO_3$ could affect the TCC behavior and the IR with suppression of grain growth caused by reinforcement of grain boundary and electrical compensation. Therefore, the enhanced electrical properties and temperature stability through the co-doping could be deduced from the increase of tetragonality and the suppression of grain growth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1496-1502
• /
• 2010

Two experiments were conducted to evaluate the effects of diet complexity and fermented soy protein on growth performance and amino acid digestibility. In Exp. 1, a total of 120 crossbred weanling pigs ($5.68{\pm}0.80\;kg$ BW) were randomly allocated into 4 treatments. Each treatment had 6 replicate pens comprising 5 pigs in each replicate. Experimental diets consisted of simple (soybean meal as protein source) and complex (soybean meal, rice protein concentrate, potato protein concentrate and fish meal as protein sources) diets; each diet contained 0 or 5% fermented soy protein (FSP), respectively. Dietary treatments included: i) simple diet; ii) simple diet with 5% FSP; iii) complex diet; iv) complex diet with 5% FSP. Pigs were provided each experimental diet for 20 d (phase 1) and then fed the same common diet for 10 d (phase 2). During days 0-10, pigs fed FSP diets had greater ADG than those fed non-FSP diets (p<0.05). G/F in FSP treatments was significantly higher than that in non-FSP treatments (p<0.05) from days 0 to 10. Throughout the overall period, G/F was greater in FSP treatments compared with non-FSP treatments (p<0.05). On d 10, N digestibility was higher in pigs fed FSP diets than in those fed non-FSP diets (p<0.05). Diet complexity did not affect growth performance and nutrient digestibility (p>0.05) in this experiment. In Exp 2, 12 ileal-cannulated, weanling barrows were housed in individual metabolism crates and randomly assigned to 1 of 4 treatments (same as Exp. 1) by using a $4{\times}4$ Latin square design. Among the essential amino acids, apparent ileal digestibility (AID) of Met and Val were increased in pigs fed FSP diets compared with those fed non-FSP diets (p<0.05). AID of Met, Phe and total essential amino acids were higher in pigs fed complex diets than in those fed simple diets (p<0.05). Among the non-essential amino acids, AID of Ala in FSP treatments was greater than that in non-FSP treatments (p<0.05). In addition, Asp, Cys, Glu, Pro, Ser and total non-essential amino acid digestibilities in pigs fed complex diets were higher compared with those fed simple diets (p<0.05). Interaction was observed in AID of Met, Asp and Pro. In conclusion, these results indicated that feeding of 5% FSP to nursery pigs improved feed efficiency and AID of amino acids, and diet complexity did not maximize the growth performance of pigs in the subsequent phase.

• The Korean Journal of Community Living Science
• /
• v.20 no.3
• /
• pp.413-421
• /
• 2009

The purpose of this study was to analyze the patterns and the interrelationships for meeting guidelines of three health behaviors including physical activity(PA), sedentary behavior(SB), and dietary behavior(DB) for Korean adolescents using 2007 KYRBS(Korea Youth Risk Behavior Survey) data. A cross-sectional design was used to assess 73392 middle-high school students. PA(moderate physical activity${\geqq}$5times/week, or vigorous ${\geqq}$3times/week), SB(watching TV, computer, DVD, video, etc. < 3 hr/day), and DB(servings of fruits ${\geqq}$1 times/day, or vegetables ${\geqq}$ 3 times/day) were categorized into two levels (meeting guidelines or not). Chi-squared tests were conducted to compare the prevalence of students not meeting these three health behaviors between boys and girls, and logistic linear regression was used to determine the interrelationships of three health behaviors. Students meeting guidelines for PA, SB, and DB were 31.0%(boys 42.6%, girls 18.0%), 74.7%(boys 75.4%, girls 74.0%), and 38.5%(boys 38.6%, girls 38.4%), respectively. In addition, there were significant differences between both genders for PA and SB (PA; $x^2(1)$=35175.11, p<.0001, SB; $x^2(1)$=19.44, p<.0001). Only 10.9% of students met all three guidelines and 12.4% did not meet all three. Pattern that simultaneously did not meet PA and DB were high in both boys(27.1%) and girls(37.2%). Students who did not meet DB were at greater risk of not meeting PA(Boys; OR 1.49, 95% CI 1.43 to 1.55, Girls; OR 1.42, 95% CI 1.34 to 1.50), and not meeting SB(Boys; OR 1.41, 95% CI 1.34 to 1.48, Girls; OR 1.36, 95% CI 1.29 to 1.43) compared with students who met DB. The findings of this study supported further evidence for the need of a multiple behavior approach considering gender and interrelationships among three behaviors.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.597-609
• /
• 2018

Korea Forest Service has supplied 76 industrial wood pellet boilers from 2011 to 2015 through subsidy programs. Since carbon monoxide (CO) and nitrogen oxides ($NO_x$) generated during boiler combustion are substances that lead to death in the case of acute poisoning, it is very important to reduce emissions. Therefore, the CO and $NO_x$ emission values of 63 boilers excluding the hot air blower and some boilers initially supplied were analyzed. The emission factor was also calculated from the measured exhaust gas concentration (based on exhaust gas $O_2$ concentration of 12%). The average value of CO emitted from industrial wood pellet boilers was 49 ppm and it was confirmed that the CO concentration was decreasing as the years passed. The emission factor of CO was 0.73 g/kg. The average value of $NO_x$ emitted from industrial wood pellet boilers was 67 ppm and the emission factor of $NO_x$ was 1.63 g/kg. Unlike CO, there was no tendency to decrease according to the installation year. Both CO and $NO_x$ measurements met the limits of the Ministry of Environment. These $NO_x$ emission factors were compared with the $NO_x$ emission factors produced by certified low $NO_x$ burners. The $NO_x$ emission factor of industrial wood pellet boilers was about 1.9 times that of certified low $NO_x$ LNG combustors and about 0.92 times that of coal combustion.

• Korean Journal of Crystallography
• /
• v.2 no.2
• /
• pp.13-21
• /
• 1991

X-ray methods have been used to determine the chain conformation and packing of the thermotropic liquid crystalline copolyester prepared from 50% tarephthaloyl chloride(TPA) and 50% (1-phenylethyl) hydroquinone(PEHQ). The x-ray patterns of annealed melt-spun fibers contain a series of annealed melt-Pointing to a well ordered crystalline structure, despite the random sense(2 or 3-) of the 1-phenylethyl substiuttion on the TPA-hydroquinone backbone. The crystalline fiber is monoclinic with space group P2l and the unit cell has dimensions 11=12.77 A, b=10.17 A (upique axis), c=12.58 h (fiber axis). and β=90.1° and contains TPA-PEHO units of to or chains. The random substitution of 1-phenylethyl groups was modelled by placing these groups at both the 2and 3 positions and giving each a weight of one-hal(. T he structure has been refined by linked a rom least square methods(LALS) against 16 observed and 21 unobserved reflections. and had a final R value of 0.20. Packing of the side chains is effected by staggering adjacent chains along the b axis by approximately c/2, so that the side chains are interleaved. The phenyl-COO and COO-phenyl torsion angles are -6.1 and 65.6, respectively, such that the main chain phenyls are mutually inclined at 59.5 (the ester groups are assumed to be planar). These torsion angles compare very well with those for the model compounds, notably phenylbenzoate, and can be used in future analyses of the structures of more complex random sequence copolyesters.

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.167-172
• /
• 2012

The turbo pump of a liquid rocket engine is composed of three main parts: the oxidizer pump, fuel pump, and turbine. Liquid oxygen ($LO_X$) is the working fluid in the cryogenic environment in the oxidizer pump, but tests are usually performed using liquid nitrogen ($LN_2$), which has a boiling point similar to that of $LO_X$ but is comparatively safer and easier to use for the test. In this study, a bearing test rig is developed and its performance is evaluated using a cryogenic ball bearing with $LN_2$ as the working fluid. Verifying the performance of the bearing test rig is crucial for ensuring correct working of the turbo pump unit in the liquid rocket engine. A stable test rig for the bearing in a cryogenic environment makes the bearing technology enhance its reliability. The test results show that the system operates stably and the requirement of performance time of 500 s is met. The test results of temperature, motor speed, and torque are discussed. The developed cryogenic bearing test rig is expected to help in widening knowledge and expanding research on ball bearings in the future.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4491-4499
• /
• 2012

Background: Breast cancer is the most frequent type of cancer among women in the world and the most common cause of deaths from cancer in females. In Turkey, breast cancer comes first in the list of the most frequent ten cancer types seen in women. As the incidence rate of breast cancer is high, many women having breast cancer in the family experience the breast cancer at secondhand. This study was carried out in an attempt to determine the information and support needs of women whose first-degree relatives have breast cancer and to what extent these needs are met. Methods: The research sample consisted of 156 women. Questionnaire Form and Information and Support Needs Questionnaires were used as the data collection tools. Results: Information need score averages ($x^-:3.72{\pm}0.19$) of women included in the research sampling were found to be higher than their score averages of support needs ($x^-:3.24{\pm}0.41$). Conclusion: Information needs which were indicated by women as very important were related to treatment, symptoms of breast cancer and breast self examination (BSE), while support needs which were indicated by women as very important were learning how to perform BSE, women's anxiety for themselves and their relatives regarding breast cancer and having their breasts examined by a health professional. It is recommended that nurses and other medical staff should give information to women whose first-degree relatives have breast cancer about the disease, its etiology, scanning, diagnosis, treatment options and protection as well as prevention.

• Journal of Gastric Cancer
• /
• v.18 no.3
• /
• pp.242-252
• /
• 2018

Purpose: Surgical resection for gastric adenocarcinoma is associated with significant post-operative morbidity and mortality. The aim of this study was to assess the prognostic significance of sarcopenia in patients undergoing resection for gastric adenocarcinoma with respect to post-operative morbidity and survival. Materials and Methods: A retrospective analysis was conducted on a cohort of consecutive patients who underwent surgical resection for gastric adenocarcinoma between 2008 and 2014. Patient demographics, radiological parameters, and pathological data were collected. OsiriX software (Pixmeo) was used to measure skeletal muscle area, which was normalized for height to calculate skeletal muscle index. Results: A total of 56 patients (41 male, 15 female; mean age, $68.4{\pm}11.9years$) met the inclusion criteria. Of these, 36% (20 of 56) of the patients were sarcopenic pre-operatively. Both sarcopenic and non-sarcopenic patient groups were equally matched with the exception of weight and body mass index (P=0.036 and 0.001, respectively). Sarcopenia was associated with a decreased overall survival (log-rank P=0.003) and was an adverse prognostic predictor of overall survival in multivariate analysis (hazard ratio, 10.915; P=0.001). Sarcopenia was a predictor of serious in-hospital complications in multivariate analysis (odds ratio, 3.508; P=0.042). Conclusions: In patients undergoing curative resection for gastric cancer, there was a statistically significant association between sarcopenia and both decreased overall survival and serious post-operative complications. The measurement and reporting of skeletal muscle index on pre-operative computed tomography should be considered.