• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.663-672
• /
• 2007

This paper proposes an algorithm for design of a multiple ring network that can be applied to an arbitrary topology in the WDM optical transport networks. Especially, we suggest an integer linear program(ILP) formulation with the objective of minimizing the total cost of nodes based on the reconfigurable OADM(ROADM) architecture and propose a heuristic algorithm to reduce computational complexity of the exact problem formulation. To evaluate the performance and validity of this scheme, we applied it to an NSFnet topology assuming the dynamic or static traffic condition and compared it with a mesh methodology about capacity of connection requests and the total cost of the nodes.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2332-2342
• /
• 1999

Multicast is an important system-level one-to-many collective communication service. A key issue in designing software multicast algorithms is to consider the trade-off between performance and portability. Based on the LogP model, the proposed parameterized communication model can more accurately characterize the communication network of parallel platforms, Under the parameterized model, we propose an efficient architecture-independent method. OPT-tree algorithm, to construct optimal multicast trees and also investigate architecture-dependent tuning on performance of the multicast algorithm to achieve the truly optimal performance when implemented in real networks. Specifically, OPT-mesh which is the optimized version of the parameterized multicast algorithm for wormhole-switched mesh networks is developed and compared with two other well-known network-dependent algorithms.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.355-366
• /
• 2005

Automatic discovery of physical topology plays a crucial role in enhancing the manageability of modern metro Ethernet networks. Despite the importance of the problem, earlier research and commercial network management tools have typically concentrated on either discovering logical topology, or proprietary solutions targeting specific product families. Recent works have demonstrated that network topology can be determined using the standard simple network management protocol (SNMP) management information base (MIB), but these algorithms depend on address forwarding table (AFT) entries and can find only spanning tree paths in an Ethernet mesh network. A previous work by Breibart et al. requires that AFT entries be complete; however, that can be a risky assumption in a realistic Ethernet mesh network. In this paper, we have proposed a new physical topology discovery algorithm which works without complete knowledge of AFT entries. Our algorithm can discover a complete physical topology including inactive interfaces eliminated by the spanning tree protocol in metro Ethernet networks. The effectiveness of the algorithm is demonstrated by implementation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.880-887
• /
• 2011

The Wireless Mesh Network(WMN) technology is able to provide an infrastructure for isolated islands, in which it is difficult to install cables or wide area such as battlefield. Therefore, WMN is frequently used to satisfy needs for internet connection and active studies and research on them are in progress. However, as a result of increase in number of hops under hop-by-hop communication environment has caused a significant decrease in throughput and an increase in delay. Considering the heavy traffic of real-time data, such as voice or moving pictures to adaptive WMN, in a military environment. Such phenomenon might cause an issue in fairness index. In order to resolve this issue, we proposed a Cluster Based Multi-channel Assignment Scheme(CB-MAS) for adaptive tactical wireless mesh network. In the CB-MAS, the communication between the Cluster-Head(CH) and cluster number nodes uses a channel has no effect on channels being used by the inter-CH links. Therefore, the CB-MAS can minimize the interference within multi-channel environments. Our Simulation results showed that CB-MAS achieves improved the throughput and fairness index in WMN.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.100-106
• /
• 2013

AMI enables bi-directional exchange of information between utilities and consumers in order to maximize energy efficiency. To enable the AMI, it is essentially required to construct stable communication networks. This paper shows the AMI system based on IEEE 802.11s as one of the communication methods. Experimental results show that the wireless mesh network technology achieves a stable communication performance over a wide coverage.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.154-158
• /
• 2008

Autonomous business card exchange system using ZigBee with low power and short range was configured In the autonomous business card exchange system characterized as full mesh network in which every node exchanges each information one by one, it is necessary to reduce the time taken for information to be exchanged. In this paper, the novel method where the node ID is exchanged based on CSMA/CA and then the information of each node is broadcast to other nodes according to the ID list based on FIFO. The time required for exchanging information using the proposed method was analyzed and compared with the direct exchange method based on CSMA/CA. The results show that it takes less time in the proposed method than the direct exchange time.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.67-73
• /
• 2010

Current on-demand ad-hoc routing protocols are not appropriate for wireless mesh networks (WMNs), because flooding-based route discovery is both redundant and expensive in terms of control message overhead. In this paper, we propose an efficient on-demand routing approach with directional flooding (DF), which is suitable for the WMNs with limited mobility. In the route discovery process to reach a gateway, our DF scheme can reduce the number of route request (RREQ) packets broadcast by using a restricted directional flooding technique. Simulation results show that ad hoc on-demand distance vector (AODV) with DF (AODV-DF) can significantly reduce routing overhead by RREQ packets and enhance overall performance compared with the original AODV.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2568-2588
• /
• 2021

Shared mesh protection (SMP) protects traffic against failures occurring in a working path, as with linear protection, and allows resource sharing of protection paths with different endpoints. The SMP mechanism coordinates multiple protection paths that require shared resources when failures occur on multiple working paths. When multiple failures occur in SMP networks sharing limited resources, activation can fail because some of the resources in the protection path are already in use. In this case, a node confirming that a resource is not available has the option to wait until the resource is available or to withdraw activation of the protection path. In this study, we recognize that the protection switching time and the number of protected services can be different, depending on which option is used for SMP networks. Moreover, we propose a detailed design for the implementation of SMP by considering options and algorithms that are commonly needed for network nodes. A simulation shows the performance of an SMP system implemented with the proposed design and utilizing two options. The results demonstrate that resource utilization can be increased or protection switching time can be shortened depending on the option selected by the network administrator.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.22-29
• /
• 2022

Recently, with the development of mobile computing power, mobile-based VR and AR services are being developed. Due to network performance and computing power constraints, VR and AR services using large-capacity 3D content have limitations. A study on an efficient 3D content load method for a mobile device is required. The conventional method downloads all 3D content used for AR services at the same time. In this paper, we propose an active 3D content load according to the user's track. The proposed method is a partitioned 3D object load. Edge servers were installed for each area and connected through the MESH network. Partitioned load the required 3D object in the area referring to the user's location. The location is identified through the edge server information of the connected AP. The performance of the proposed method and the conventional method was compared. As a result of the comparison, the proposed method showed a stable Mobile AR Service. The results of this study, it is expected to contribute to the activation of edge server-based AR mobile services.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.3-8
• /
• 2023

Multi-domain optical transport networks are not fundamentally interoperable and require an integrated orchestration mechanism and path provision mechanism at the entire network level. In addition, ensuring network survivability is one of the important issues. MPLS-TP (Multi-Protocol Label Switching-Transport Profile) defines various protection/recovery methods as standards, but does not mention how to calculate and select protection/recovery paths. Therefore, an algorithm that minimizes protection/recovery collisions at the optical circuit packet integrated network level and calculates and sets a path that can be rapidly protected/recovered over the entire integrated network area is required. In this paper, we proposed an algorithm that calculates and sets up a path that can be rapidly protected and restored in a T-SDN network composed of multiple ring-mesh topology.