• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.317-326
• /
• 2017

Comparative fishing experiments were conducted in the eastern coastal waters near Uljin, Korea from 2002 to 2004, using the experimental trammel nets to estimate the selectivity for spinyhead sculpin Dasycottus setiger. The inner panels of the nets were made of nylon monofilament with four mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) while its two outer panels were made of twisted nylon multifilament with a mesh size of 510 mm. The SELECT (Share Each Length's Catch Total) procedure with maximum likelihood method was applied to obtain a master selection curve. The different functional models (normal, lognormal, bi-normal, and logistic model) were fitted to the catch data. The lognormal model with the fixed relative fishing intensity was chosen as the best-fitted selection curve through comparison of model deviance and AIC (Akaike's Information Criterion). The optimum relative length (the ratio of fish total length to mesh size) with the maximum relative efficiency was obtained as 2.492.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.127-138
• /
• 1997

In this study, a new technique is presented, by which one can define ship hull form with full fairness from the input data of lines. For curve modeling, the de Casteljau Algorithm and Bezier control points are used to express free curves and to establish the unified curve modeling technique which enables one to convert non-uniform B-spline (NUB) curve or cubic spline curve into composite Bezier curves. For surface modeling, the mesh curve net which is required to define surface of ship hull form is interpolated by the method of the unified curve modeling, and the boundary curve segments of Gregory surface patches are generated by remeshing(rearranging) the given mesh curve net. From these boundary information, composite Gregory surfaces of good quality in fairness can be formulated.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.223-231
• /
• 2010

This paper showed the difference between the selectivity of gill net by least square method with polynomials in Kitahara's and that by maximum likelihood analysis for Japanese sandfish and Korean flounder. Catch experiments for Japanese sandfish using commercial vessels off the eastern coast of Korea were conducted with six different mesh sizes between October and December 2007 and those for Korean flounder with five different mesh sizes between 2008 and 2009. The mesh size of 50% probability of catch corresponding to biological maturity length of fish was not different between that by least square method and that by maximum likelihood analysis for Japanese sandfish, however, a little different for Korean flounder, that is, those mesh sizes of 50% probability of catch for biological maturity length of Korean flounder were 10.6cm and 10.1cm by least square method and maximum likelihood analysis, respectively.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.435-440
• /
• 2001

The purpose of this study was to evaluate mesh size and water velocity for the growth of filamentous periphytic algae(FPA). The growth experiment was carried out in the constructed pilot waterway system with nutrient-rich treated wastewater. Growth rate of FPA was highest at water velocity about 10 cm/s. The maximum standing crop of FPA was $253\;{\mu}g\;chl.a/cm^{3}$, and an average of the net productivity was $3.92\;mgDW/cm^{2}/day\;or\;25.3\;{\mu}g\;chl.a/cm^{2}/day$. Biomass development and growth rates of FPA were highest at the net with 20mm mesh size during the fall season and 10mm mesh size during the winter season.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.290-299
• /
• 2011

Field tests were carried out with five different mesh sizes (86.6, 101.0, 121.2, 137.7, 151.5mm) to study the relative efficiency of monofilament and multifilament gill net for Marbled sole, Pleuronectes yokohamae, in the western sea of Korea, 2007-2009. The relative efficiency was analyzed by length distribution, catch in number, catch in weight and weight per individual for Marbled sole. Statistical T-test was done to verify the efficiency between two gears. In the field tests, the total body length range, catch in number and weight of Marbled sole was 15.8-48.2cm, 728 and 254,939g, respectively. During the field tests, Marbled sole less than 15cm length which is prohibition size of fishing was not caught, but the caught number of Marbled sole less than 19.5cm length which is first maturity length was 13 (1.8%) and the caught number of Marbled sole more than 19.5cm was 715 (98.2%). Catches of monofilament gill net was average 1.4 times more efficient than multifilament gill net. The weight per individual and total length by mesh sizes in the two gears tended to gradually increase according to mesh size increasing. But there was little difference of weight per individual and total length by mesh sizes between two gears.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3470-3493
• /
• 2019

IEEE 802.11s-based infrastructure Wireless Mesh Networks (iWMNs) are envisaged as a promising solution to provide ubiquitous wireless Internet access. The limited network capacity is a problem mainly caused by the medium contention between mesh users and the mesh access points (MAPs), which gets worst when the mesh clients employ the Transmission Control Protocol (TCP). To mitigate this problem, we use wireless network coding (WNC) in the MAPs. The aim of this proposal is to take advantage of the network topology around the MAPs, to alleviate the contention and maximize the use of the network capacity. We evaluate WNC when is used in MAPs. We model the formation of coding opportunities and, using computer simulations, we evaluate the formation of such coding opportunities. The results show that as the users density grows, the coding opportunities increase up to 70%; however, at the same time, the coding delay increments significantly. In order to reduce such delay, we propose to adaptively adjust the time that a packet can wait to catch a coding opportunity in an MAP. We assess the performance of moving-average estimation methods to forecast this adaptive sojourn time. We show that using moving-average estimation methods can significantly decrease the coding delay since they consider the traffic density conditions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.172-181
• /
• 1994

The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.2
• /
• pp.95-100
• /
• 2005

In order to improve the gill nets for croaker, Miichthys miiuy which is proper to the fishermen's income ans fisheries resource management, we had studied to the net height of present gill nets (mesh size 160mm, 50 mesh in depth), experimental gill nets-I(mesh size 150mm, 68 mesh in depth) and experimental gill nets-II(mesh size 142mm, 75 mesh in depth) in wter using the gill nets design ans analysis simulation system, and then investigated and analyzed the catch efficiency of each gill nets through the field fishing experiments. The net height of emperimental gill nets-I and experimental gill nets-II in water were estimated respectively about 1.5 times and 1.3 times higher than present gill nets which the net height is about 3.5m as the results of simulation considering the current of fishing fields. Total number of croakers which were caught by the persent gill nets was 62(body length 300~1,200mm), total catch weight was 398.7kg (mean 0.6kg/sheet). Total number of croakers which were caught by the experimental gill nets- I was 68(body length 600~1,100mm), total catch weight was 391.6kg (mean 1.2kg/sheet). Total number of croakers which were caught by the experimental gill nets-II was 28(body length 400~900mm), total catch weight was 99.2kg (mean 0.3kg/sheet).

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.561-570
• /
• 2022

This study investigated the changes in planting environment and growing conditions of 'Arisoo' apple trees under shading net treatments. Apple tree canopies were fully covered with Blue (blue color net, mesh size: 4 mm × 5 mm), Black-A (black color net, mesh size: 4 mm × 5 mm), Black-B (black color net, mesh size: 5 mm × 6 mm), and uncovered trees were used as the control. Inside the tree canopies, the illuminance was observed as 100% (85.0 Klux) in the control, but it decreased to 75% (64.3 Klux) in the Blue, 73% (63.0 Klux) in the Black-A, and 77% (65.9 Klux) in the Black-B nets, respectively. The solar irradiance was observed as 755 w·m^-3 in the control, but it was decreased to 715 w·m^-3 in the Blue, 624 w·m^-3 in the Black-A, and 647 w·m^-3 in the Black-B nets, respectively. The average daily temperature was observed to be the highest in the Black-A net (31.8℃) while it was observed to be around 30.0℃ in the control, Blue, and Black-B nets. In addition, the average fruit surface temperature was observed to be the highest (39.4℃) in the control, but it was decreased to 38.1℃ in the Blue, 37.3℃ in the Black-A, and 39.0℃ in the Black-B nets. However, the average soil temperature, the shoot growth rate, and leaf SPAD values were not different in all the treatments. Fruit sunburn disorders were the highest in the control while it was observed to be lower in the fruits from trees covered with the shading nets. However, at harvest, the fruit quality parameters were not different in all the treatments. Overall, this study suggests that the apple trees covered with the shading nets reduced the illuminance, solar irradiance, fruit surface temperature, and fruit sunburn disorders. However, the shading nets did not affect tree growth and apple fruit quality.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.195-202
• /
• 2006

To determine the relative efficiency and mesh selectivity of gill net for the Pacific saury, Cololabis saira, a series of fishing experiments was carried out in the Northwest Pacific Ocean from August 13 to October 13 in 2002, using gill nets of different mesh size(30, 33, 35, 37, 39 and 42mm) constructed from two kinds of twine material(monofilament, twisted multifilament nylon web). The relative efficiency of two material gears was expressed as the ratio obtained by dividing monofilament catch by multifilament catch in number. The master selection curve of each material gear was estimated by applying the extended Kitahara's method. The catch of experimental gears is mostly Pacific saury(98.6%), Cololabis saira. The kinds of bycatch are common squid(0.7%), Pacific mackerel(0.6%), etc. Catch comparisons in the two gears showed that monofilament nylon nets are 1.7 times more efficient. The optimum values in monofilament and multifilament gill net for Pacific saury are 8.28 and 8.23, respectively.