• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.5
• /
• pp.196-208
• /
• 2005

In multiprocessor systems, interconnection network design is critical for overall system performance. Popular interconnection networks, which are generally considered, are meshes, rings, and hierarchical rings. In this paper, we propose (')Torus Ring('), which is a modified version of hierarchical ring. Torus Ring has the same complexity as the hierarchical rings, but the only difference is the way it connects the local rings. It has an advantage over the hierarchical rings when the destination of a packet is the neighbor local ring in the reverse direction. Though the average number of hops in Torus Ring is equal to that of the hierarchical rings when assuming the uniform distribution of each transaction, the benefits of the number of hops are expected to be larger because of the spatial locality in the real environment of parallel programming. In the simulation results, latencies in the interconnection network are reduced by up to 19$\%$, and the execution times are reduced by up to 10$\%$.

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.233-239
• /
• 1992

The characteristics of Packsulgi were investigated with different cooking methods of conventional and pressure cookers and variation in panicle size of rice flour. The water contents of rice f1ours and Packsulgis were greater as the particle became coarser. The water contents of Packsulgis cooked with pressure cooker (P) were greater than those of conventional cooker (C). Degree of gelatinization in P was higher than that of C. There were no significant differences among the samples of P, whereas coarser f1ours tended to show higher degree of gelatinization than finer ones in C. The results of textural properties measured by rheometer showed that hardness, cohesiveness and gumminess of P was higher than that of C. The textural parameter of P increased as the particle became finer, whereas mat of C increased as the particle became coarser. L value of C was higher than that of P in me same particle size, whereas a and b value of P was higher than that of C. L and a value of both P and C increased as the particle became finer. b value in P increased as the particle became coarser, whereas mat in C increased as the particle became finer. According to me sensory evaluation, the appearance of C was more acceptable man that of P, whereas the texture of P was more acceptable than mat of C. There were no significant differences in overall quality among P and c and Packsulgis made by 60, 100 mesh rice f1our had higher acceptability than others.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.49-54
• /
• 2005

Measuring ground resistance is a typical way of performance evaluation of a grounding electrode. Among various ground resistance measurement methods, FOP (Fall-Of-Potential) method has been widely used, especially in case of a relatively large grounding electrode such as a substation grounding mesh grid Since FOP measurement line has to be increased as the size of grounding electrode increases, however, it is often that securing long enough FOP-line is practically impossible. In this paper, a sophisticated interpretation method of FOP measurement ma which is applicable to large grounding electrode networks, is presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.391-399
• /
• 2008

In this paper, we further generalize the work of Lin and Abel to the case of the first and the second order derivatives of energy release rates for two-dimensional, multiply cracked systems. The direct integral expressions are presented for the energy release rates and their first and second order derivatives. The salient feature of this numerical method is that the energy release rates and their first and second order derivatives can be computed in a single analysis. It is demonstrated through a set of examples that the proposed method gives expectedly decreasing, but acceptably accurate results for the energy release rates and their first and second order derivatives. The computed errors were approximately 0.5% for the energy release rates, $3\sim5%$ for their first order derivatives and $10\sim20%$ for their second order derivatives for the mesh densities used in the examples. Potential applications of the present method include a universal size effect model and a probabilistic fracture analysis of cracked structures.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.340-348
• /
• 2009

The recycled polyethylene was used for making wood-plastic composite panels. In this experiment, the sizes of wood particles used were 1/32", 1/4" and 1/2" in mesh number, and the contents of the recycled polyethylene were 10%, 30% and 50%. The physical and mechanical properties of the composite panels were investigated. At a given content of recycled polyethylene, the density of composite panel decreases with the increase of wood particle size. The thickness swelling and water adsorption decrease with the increase of recycled polyethylene, where significantly lower at 10%, compared with at 30%. In the water soaking experiment for 14 days, the dimensional stability of composite panel appeared good in the composite panel with recycled polyethylene content of 30% or higher. As the content of recycled polyethylene increases, the internal bonding strength and the modulus of rupture in bending strength increases. In SEM, the molten recycled polyethylene showed interlocking action through its penetration into tracheid openings including pits as well as binder between wood particles as the matrix material, thus increasing bonding strength and improving the physical and mechanical properties of composite panel.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.104-114
• /
• 1999

This paper proposes an efficient method for the automatic generation of personalized 3D face model from color image sequence. To detect a robust facial region in a complex background, moving color detection technique based on he facial color distribution has been suggested. Color distribution and edge position information in the detected face region are used to extract the exact 31 facial feature points of the facial description parameter(FDP) proposed by MPEG-4 SNHC(Synthetic-Natural Hybrid Coding) adhoc group. Extracted feature points are then applied to the corresponding vertex points of the 3D generic face model composed of 1038 triangular mesh points. The personalized 3D face model can be generated automatically in less then 2 seconds on Pentium PC.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.527-532
• /
• 2012

Terrestrial LiDAR emerges as a main mapping technology for indoor 3D cadastre, cultural heritage conservation and, building management in that it provides fast, accurate, and reliable 3D data. In this paper, a new 3D modeling method consisting of segmentation stage and outline extraction stage is proposed to develop indoor 3D model from the terrestrial LiDAR. In the segmentation process, RANSAC and a refinement grid is used to identify points that belong to identical planar planes. In the outline tracing process, a tracing grid and a data conversion method are used to extract outlines of indoor 3D models. However, despite of an improvement of productivity, the proposed approach requires an optimization process to adjust parameters such as a threshold of the RANSAC and sizes of the refinement and outline extraction grids. Furthermore, it is required to model curvilinear and rounded shape of the indoor structures.

• Composites Research
• /
• v.23 no.6
• /
• pp.1-6
• /
• 2010

The electrical conductivity of carbon-fiber reinforced plastics (CFRP's) has been improved by indium-tin oxide (ITO) nano-particle coating on carbon fibers for the purpose of lightning strike protection of composite fuselage skins. ITO nano-particles were coated on the surface of carbon fibers by spraying the colloidal suspension with 10~40% ITO content. The electrical conductivity of the CFRP has been increased more than three times after ITO coating, comparable to or higher than that of B-787 composite fuselage skins with metal wire-meshes on the outer surface, without sacrificing the tensile property due to the existence of nano-particles at fiber-matrix interface. The damage area by the simulated lightning strike was also verified for different materials and conditions by using ultrasonic C-scan image. As the electrical conductivity of 40% nano-ITO coated sample surpass that of the B-787 sample, the damage area by lightning strike also appeared comparable to that of the materials currently employed for composite fuselage construction.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.61-67
• /
• 2017

In this study, Burning Area Analysis Program (BAAP) was developed by using VOF method to estimate the burning area of 3D shaped grain. The parametric study of mesh size, burning rate and time interval for numerical calculation was conducted. The result of BAAP is compared with the one from commercial 3D modeling software. Also the internal ballistic analysis was performed using the result of BAAP. In order to estimate the burning area and internal pressure with time, Chemical Equilibrium Analysis (CEA) was conducted with a composition of reduced smoke propellant. As a result, the web-averaged pressure was 5.34 MPa which is similar to the published research result.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.104-115
• /
• 1999

This paper proposes an efficient method for 3D modeling of a human face from trinocular images by reconstructing face surface using range data. By using a trinocular camera system, we mitigated the tradeoff between the occlusion problem and the range resolution limitation which is the critical limitation in binocular camera system. We also propose an MPC_MBS (Matching Pixel Count Multiple Baseline Stereo) area-based matching method to reduce boundary overreach phenomenon and to improve both of accuracy and precision in matching. In this method, the computing time can be reduced significantly by removing the redundancies. In the model generation sub-pixel accurate surface data are achieved by 2D interpolation of disparity values, and are sampled to make regular triangular meshes. The data size of the triangular mesh model can be controlled by merging the vertices that lie on the same plane within user defined error threshold.