• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.136-139
• /
• 2004

The dyeing effluent is a highly colored stream containing unfixed dyes along with salts and auxiliary chemicals such as emulsifying agents. Moreover, Textile dying is a chemically intensive process and consumes large quantities of water. Difficulties in the effluent treatment arise from its non-degradable property by aerobic digestion.(omitted)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.71-74
• /
• 2006

The introduction of materials and methods of construction which are appropriated to property of green roofs could be a decisive factor in a long-range durability and economical maintenance cost, moreover, it support to variety construction system and organization. In this paper I focused to assure the basic system for waterproofing materials and root barrier apply to green roof as searching the application of field condition. And I suggest proper waterproofing and root barrier as considering the mutual connection and plant growth. and it can be a standard model to adopt to domestic green roof system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1461-1465
• /
• 2007

A micromachined sensor part for an infrared focal plane array has been designed and fabricated. Amorphous silicon was adapted as a sensing material, and silicon nitride was used as a membrane material. To get a good efficiency of infrared absorption, the sensor was made as a ${\lambda}/4$ cavity structure. All the processes were done in $0.5\;{\mu}m$ iMEMS fab. in the Electronics and Telecommunication Research Institute (ETRI). The processed MEMS sensor structure had a small membrane deflection less than $0.3\;{\mu}m$. This excellent deflection property can be attributed to the rigorous balancing of the stresses of individual layers. The efficiency of infrared absorption was more than 75% in the wavelength range $8\;-\;14\;{\mu}m$.

• Membrane Journal
• /
• v.7 no.3
• /
• pp.123-130
• /
• 1997

The characteristics of microporous separator for lithium ion secondary battery was introduced. Microporous separator is a key component of a lithium ion secondary battery because its basic properties were related with the performance and safety of the battery. Up to now, stretched microporous polyolefins such as polyethylene(PE) separator were mainly applied. It is still required to enhance wettability and shut-down property. For this purpose, the application of fluorovinylic polymers and surface modification of conventional polyolefinic microporous membrans we being continuously tried.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.4
• /
• pp.193-202
• /
• 2009

In the preparation of anion charged asymmetric ultrafiltration membranes by the conventional phase inversion method, several variables could be adjusted to control membrane permeations. The anion charged materials and its original polymer have good solubility in N-methyl-2-pyrrolidone. The membranes having a hydrophilic property were less fouled the membrane prepared from the original polymer. The preparation conditions, operation conditions, and hydrophilicity of polymer have played an important role in determining the permeation properties of membranes.

• Membrane Journal
• /
• v.24 no.5
• /
• pp.367-374
• /
• 2014

In the present study, disc-type LSCF/GDC (20 : 80 vol%) dual-phase membranes having porous LSC/GDC (50 : 50 vol%) active layers were prepared and effect of active layers on oxygen ion transport behavior was investigated. Introduction of active layers improved drastically oxygen flux due to enhanced electron conductivity and oxygen surface exchange activity. As firing temperature of active layer increased from $900^{\circ}C$ to $1000^{\circ}C$, oxygen flux increased due to improved contact between membrane and active layer or between grains of active layer. The enhanced contact would improve oxygen ion and electron transports from active layer to membrane. Also, as thickness of active layer increased from 10 to $20{\mu}m$, oxygen flux decreased since thick active layer rather prevented oxygen molecules diffusing through the pores. And, STF infiltration improved oxygen flux due to enhanced oxygen reduction reaction rate. The experimental data announces that coating and property control of active layer is an effective method to improve oxygen flux of dual-phase oxygen transport membrane.

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.49-54
• /
• 2012

Various anion exchange membranes were prepared by radiation graft copolymerization of vinylbenzyl chloride onto fluorinated films and subsequent quaternization with various tertiary amines such as trimethylamine, N,N-dimethylbuthylamine, N,N-dimethylaniline, and N-methylpiperidine. The quaternizations of the anion exchange membranes were confirmed by measuring of the ion exchange capacities of the membranes. The mechanical properties and the water uptakes were also measured. The elongation at break was found to be largely dependent on the fluorinated film, the quateranry ammonium, and the degree of grafting. The results indicate that the poly (ethylene-alt-tetrafluoroethylene) with quaternized trimethylamine moiety exhibits higher flexible property compared to the other prepared anion exchange membranes.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.247-255
• /
• 2020

Sand filter is a key unit process for particle removal in water purification treatments. Its long-standing use is due to on-site customized retrofit. Proper selection of filter media is one of the retrofit approaches to improve filter performance. This study described a series of controlled laboratory column tests and examined the effects of media property on filtration and backwash. When sand media of 0.51 mm in effective size was replaced by sand of 0.60 mm, the filter run increased up to 5 times in the given bed depth. The change of media property required an increase of backwash rate by 0.05 m/min to satisfy the requirement of bed expansion, more than 20%. When the anthracite was changed with lower effective size and uniformity coefficient, correlation with sand in the filter bed could be satisfied within the permissible error between media and bulk characteristics. Besides, this selection resulted in a well-stratified configuration of media layers after bed expansion. The column study showed that the correlation of property between the dual media had a significant effect on the filter productivity and backwash interval.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.104-104
• /
• 2003

Geosynthetic Reinforcements - membrane drawn type, warp/knitted type, junction bonded type and composite type geogrids, strip type reinforcement - were used to compare the long-term perfor-mance by total factor of safety with reduction factors during service periods. To evaluate the reduction factors, wide-width tensile property, installation damage, creep deformation, chemical and biological degradation tests were performed. Long-term design strengths of geosynthetic reinforcements were calculated by using GRI standard Test Method GG4.

• Proceedings of the Korean Magnetic Resonance Society Conference
• /
• 2001.02a
• /
• pp.26-26
• /
• 2001