• 한국수산과학회지
• /
• 제49권2호
• /
• pp.137-145
• /
• 2016

This study screened the biological activity of an acidified gill extract of the Manila clam Ruditapes philippinarum including antimicrobial, hemolytic, membrane permeabilization, and DNA-binding activity, and purified the antimicrobial material. The acidified gill extract showed potent antimicrobial activity against Bacillus subtilis and Escherichia coli without significant hemolytic activity, but showed no membrane permeabilization or DNA-binding ability. An antimicrobial material was purified from the acidified gill extract using C₁₈ reversed-phase and cation-exchange high-performance liquid chromatography (HPLC). Treatment of the purified material with trypsin completely abolished all of the antibacterial activity against Bacillus subtilis, suggesting that the purified material is a proteinaceous antibiotic. The molecular weight of the purified material was 2571.9 Da, but no primary structural information was obtained due to N-terminal blocking. A future study should confirm the primary structure. Our results suggest that the Manila clam gill contains proteinaceous antibiotics that have a role in first-line defense. This information could be used to better understand the Manila clam innate immune system.

• 센서학회지
• /
• 제11권5호
• /
• pp.294-300
• /
• 2002

In this study, we fabricated thermopile infrared sensor with floating membrane structure. Floating membrane was formed by SOI(Silicon On Insulator) structure. In SOI structure, silicon dioxide layer between top silicon layer and bottom silicon substrate was etched by HF solution, then membrane was floated over substrate. After membrane was floated, thermopile pattern was formed on membrane. By insertion of SOI technology, we could obtain thermal isolation structure easily and passivation process for sensor pattern protection was not required during fabrication process. Then, the amplifier circuit for thermopile sensor was fabricated by using $1.5{\mu}m$ CMOS process. The voltage gain of fabricated amplifier was about two hundred.

• Applied Microscopy
• /
• 제19권1호
• /
• pp.34-48
• /
• 1989

The oval shaped pericardial cells are clustered along the lateral sides of the heart and irregularly connected with the heart. The cells are bounded by a basement membrane. The basement membranes of the connected two peicardial cells are irregularly linked each other there-fore funnels are formed. The multiple invaginations of the cell membrane are observed and septate junctions develope at the part of enterance of the cell membrane. The coated pits are appeared in the inner side of the invaginated cell membrane. The coated vesicles, tubular and spherical shaped vesicle, Golgi complex containing high electron densed material in the cisternae and mitochondria are observed in the cytoplasm and lysosomes are remarkably well developed. The whirled membrane structures in the multiformed complex bounded by single membrane are linked with low electron densed granules and spherical shaped small granules having high electron density with $0.03{\mu}m$ in diameter are located between the whirled membrane in a row and gradually secretes the granules and then they produced the multilamellar body. The lysosomal regions of cytoplasm of pericardial cell are appeared negative reaction to the acid phosphatase and according to the results of the electrophoresis, lipoproteins having acid phosphatase activity are contained. The axon is contacted with the pericardial cells.

• 한국공간구조학회논문집
• /
• 제8권6호
• /
• pp.67-74
• /
• 2008

본 연구는 막구조물의 장력 측정을 위한 휴대용 막장력측정기기의 개발을 목적으로 한다. 2축시험기에 장착된 막의 장력을 간이 측정기에 의해 측정하여 구한 실험 데이터를 근거로 효율적인 2축방향 막 장력측정기기를 개발하는데 그 목적이 있다. 연구결과 개발된 휴대용 간이 장력측정기기는 정량적이고 정성적인 측면에서 데이터의 정밀도가 매우 높아 향후 상용제픔으로도 개발이 가능함을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.66-70
• /
• 2005

IS 프로세스의 HI 분해 반응에서의 적용을 위해 고분자재료(폴리이미드)를 이용하여 탄화 막을 제작하고, 이 탄화막에 SiO를 처리함으로써 SiC 막을 제작하였다. 폴리이미드의 탄화에 의한 중량 감소는 약 50% 정도이고, 탄화 온도가 증가할수록 중량감소도 증가하였다. 탄화막은 탄화온도가 상승하면 가스 투과속도가 감소하고 막의 치밀화가 진행되었다. SiC 막은 SiO의 처리 농도가 증가하면 가스 투과 속도는 증가하고, 기체 투과 메커니즘은 활성화에너지 흐름에서 Knudsen 흐름으로 변화한다는 것을 알 수 있었다.

• 한국공간구조학회논문집
• /
• 제10권3호
• /
• pp.41-48
• /
• 2010

건축용 막재는 일반적으로 직포와 코팅으로 구성되며, PTFE 계열 막재는 유리섬유로 만들어진 직포에 테프론 코팅으로 구성된다. 일반적으로 PTFE 막재에 사용되는 직포에는 $\beta$-yarn이 주로 사용되며, $\beta$-yarn이 아닌 $\alpha$-yarn이 사용된 막재도 점차적으로 사용되는 시점이다. 그러나 $\alpha$-yarn으로 직조된 직포로 만들어진 건축용 막재의 특성에 관한 정보는 일반 막재에 비해 많이 부족한 편이다. 따라서 건축용 막재를 구성하는 직포를 만드는 원사의 굵기에 따른 막재의 역학적 특성에 대한 연구가 필요하다. 본 연구에서는 실험을 통하여 원사가 서로 다른 막재의 인장 특성을 비교 분석하고자 한다.

• Elastomers and Composites
• /
• 제33권1호
• /
• pp.37-43
• /
• 1998

The permeation of gas through polymer membrane at temperatures above its glass transition, generally occurs by a solution-diffusion mechanism. This mechanism is performed by the affinity difference between polymeric materials and gas molecules, and various technologies, such as copolymerization, impregnation and so on, have been researched to improve the affinity of polymeric material for the gases. In this study, permeability and selectivity for some gases were obtained from steady-state rates of gas permeation through silicone rubber membrane which is prepared by supercritical fluid extraction method. The permeability was measured by the volumetric method proposed by Barrer. Permeability was increased generally with temperature and permeation pressure. Silicone rubber membrane shows a higher permeability to $CO_2$ than to $O_2$, $N_2$. This results probably reflect the relatively high solubility of CO_2 in silicone rubber membrane, which is due to the affinity of $CO_2$ molecules. Since separation powers of $CO_2/N_2$, $CO_2/O_2$ were more than 200, and 100, respectively, it is able to separate $CO_2$ from the air, and the optimum temperature and pres-sure was 328.15 K, 60 cmHg respectively. In future, it is possible that the silicone rubber membrane can be used for separation or concentration of $CO_2$ through experiment for mixed gas separation.

• Smart Structures and Systems
• /
• 제14권2호
• /
• pp.71-83
• /
• 2014

The purpose of this paper is to investigate the flexible structure of parabolic shell using photostrictive actuators. The analysis is made to know its dynamic behavior and light-induced control forces for coupled parabolic shell. The effects of an actuator location as well as membrane and bending components under the control action have been analyzed considering the approximate spherical model. The parabolic membrane shell accuracy is being mathematically approximated and validated comparing the light induced control forces using approximate equivalent spherical shell model. The parabolic shell with kapton smart material and photostrictive actuators has been used to formulate the governing equation in the transverse direction. The Kirchhoff-Love assumptions are used to obtain the governing equation of shell with actuator. The mechanical membrane forces and bending moments for parabolic thin shell with actuator is used to analyze the dynamic effect. The results show that membrane control action is much more significant than bending control action. Photostrictive actuators oriented along circumferential direction (actuator-2) can give better control effect than actuators placed along longitudinal direction (actuator-1). The slight difference is observed between spherical and parabolic shell for a surface with focal length to the diameter ratio of 1.00 or more than unity. Space applications often have the shape of parabolical shells or shell of revolution, due to their required focusing, aiming, or reflecting performance. The present approach is focused that photostrictive actuators can effectively control the vibration of parabolical membrane shell. Also, the actuator's location plays an important role in defining the control force.

• 폴리머
• /
• 제28권4호
• /
• pp.352-359
• /
• 2004

트립토판, 타이로신, 페닐알라닌과 같은 라세미 화합물의 광학 분할을 위해 광학 선택성 분리막을 이용한 막 분리법을 이용하였으며, 사용된 분리막 제조를 위해서 막 재료로 알진산나트륨 (sodium alginate)을, 가교제로 글루타르알데하이드 (glutaraldehyde)를 사용하였다. 제조된 막의 구조는 FT-IR을 이용하여 관찰하였고 라세미화합물의 광학 분할 메카니즘을 확인하기 위해서 모델링을 실시하였다. 막의 가교정도, 공급액의 농도, 조작압력, 그리고 공급액의 증류에 따른 막의 투과 특성을 알아보기 위해 여러 가지 변수를 통한 실험을 실시하였으며, 그 결과 막의 가교도와 두께가 증가할수록, 공급액의 농도와 용질의 크기가 감소할수록 즘 더 높은 광학 분할 능을 나타낸다는 것을 발견하였으며 이때의 enantiomeric excess (%ee) 값은 약 77%로 나타났다.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.121-128
• /
• 2022

A tremendous amount of energy resources is being wasted in cleaning wastewater to save the environment across the globe. Several different procedures are commercially available to process wastewater. In this work, membrane filtration technique is used to treat the textile wastewater because of its cost effectiveness and low environmental impacts. Mixed Matrix Membrane (MMM) consist of Polyvinyl Alcohol (PVA) in which Graphene Oxide (GO) was added as a filler material. Five different membranes by varying the quantity of GO were prepared. The prepared membrane has been characterized by Scanning Electron Microscopy (SEM), X-Ray Diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR) and Water Contact Angle (WCA). The prepared membranes have been utilized to treat textile wastewater. The synthesized membranes are used for the elimination of total dissolve solids (TDS), total suspended solids (TSS), Methylene blue (MB) dye and copper metallic ions from textile wastewater. It is concluded that amount of GO has direct correlation with the quality of wastewater treatment. The maximum removal of TDS, TSS, MB and copper ions are found to be 7.42, 23.73, 50.53 and 64.5% respectively and are achieved by 0.02 wt% PVA-GO membrane.