• ALGAE
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2007

The expression of genes responding to cold stress in a freshwater alga, Spirogyra varians, was studied by using differential expression gene (DEG) method. A gene strongly up-regulated in 4°C was isolated and designated as SVCR2 (Spirogyra varians cold regulated) gene. The cDNA encoding SVCR2 was cloned using λZAP cDNA library of Spirogyra varians. The deduced amino acid had a sequence similarity with trans-membrane protein in Arabidopsis thaliana (Q9M2D2, 52.7%). Northern blot analysis demonstrated that transcript level of SVCR2 increased about 10 fold under low temperature (4°C), compared with that cultured at warm (20°C) conditions. The expression of SVCR2 was also affected by light conditions. When the plants were exposed to high light (HL) (1200 μmol photon m–2 s–1), the expression of SVCR2 began within 2 hrs. This gene expression lasted for 4 hrs and decreased afterwards. Under the blue light (470 nm) condition, the expression of this gene was induced in same way as HL treatment, even under less than 100 μmol photon m–2 s–1. But red light (650 nm) and UV-A irradiation did not affect the expression of SVCR2.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.612-616
• /
• 1991

Metachromatic behavior of methylene blue (MB) in solutions of aqueous sodium dodecyl sulfate (SDS), chondroitin sulfate and L-${\alpha}$-lecithin vesicle at $18~52^{\circ}$C has been studied by absorption spectroscopy. MB was clustered in the matrix of the vesicle with high concentration of L-${\alpha}$-lecithin. The metachromasy of MB was found to be independent of phase transition temperature of vesicles. These results suggest that the dyes were aggregated on the hydrophilic surfaces of vesicle. In the vesicular system, the metachromatic effect of MB was dramatically decreased in the presence of hexadecyltrimethylammonium bromide (CTAB) than SDS. It is estimated that the intercalation site of these surfactants on vesicle surfaces was different, that is, the intercalation of CTAB was more effective than that of SDS.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.420-426
• /
• 2017

A colorimetric sensor was investigated to achieve a low-cost warning device for harmful gaseous formaldehyde (HCHO). The sensor is based on selective reactions between hydroxylamine sulfate and HCHO, leading to the production of sulfuric acid. The produced acid results in color-changing response through the acid-base reaction with dye molecules impregnated on a solid membrane substrate. For attaining this purpose, sensors were fabricated by drop-casting a dye solution prepared using different pH indicators on various commercially available polymer sheets, and their colorimetric responses were evaluated in terms of sensitivity and reliability. The colorimetric sensor using bromophenol blue (BPB) and nylon sheet was found to exhibit the best performance in HCHO detection. An initial bluish green of a sensor was changed to yellow when exposed to gaseous formaldehyde. The color change was recorded using an office scanner and further analyzed in term of RGB distance for quantifying sensor's response at different HCHO(g) concentrations. It exhibited a recognizable colorimetric response even at 50 ppb, being lower than WHO's standard of 80 ppb. In addition, the sensor was found to have quite good selectivity in HCHO detection under the presence of common volatile organic compounds such as ethanol, toluene, and hexane.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.1
• /
• pp.59-63
• /
• 2008

Poly (vinylchloride) (PVC) membrane electrodes based on neutral carrier, tetracycline was prepared as an active sensor for Hg(II) ion, and tested in different contents of the potassium tetrakis (4-chlorophenyl) borate (KTpClPB) as lipophilic salt. Bis (2-ethylhexyl) sebacate (DOS), bis(l-butylpentyl) adipate (BBPA), 2-nitrophenyl octyl ether (NPOE) and dibutyl phthalate (DBP) were used as diverse plasticizing solvent mediators. This electrode shows excellent potentiometric response characteristics and display good linearity with log $[Hg^{+2}]$ versus EMF response, over a range of concentrations between $10^{-7}$ and $10^{-3}M$. With 30.8mV/decade Nernstian slope, the detection limit was $6.9{\times}10^{-9}M$ and the response time was less than 20s. The proposed electrode yields very good selectivity for mercury (II) ion over many cations such as alkali, alkaline earth, transition and heavy metal ions. And it shows a very stable potential values in a wide pH range. This reliable electrode prepared was kept at least a month without considerable alteration in their response to Hg (II) ion.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.624-629
• /
• 1994

Chitosan-g-poly(4-vinyl pyridine)membranes were prepared by crosslinking reaction using glutaraldehyde and glucose oxidase immobilized chitosan/acrylamide composite membranes were fabricated by chitosan-g-poly(4-vinyl-pyridine) copolymer and acrylamine. Water content and permeability of insulin through chitosan-g-poly(4-vinyl pyridine )membranes increased with decreasing the pH of the medium. Permeability of insulin through chitosan/acrylamide composite membranes increased with increasing the concentration of glucose.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.349-352
• /
• 2014

Anodic alumina oxide (AAO), a self-ordered hexagonal array, has various applications in nanofabrication such as the fabrication of nanotemplates and other nanostructures. In order to obtain highly ordered porous alumina membranes, a two-step anodization or prepatterning of aluminum are mainly conducted with straight electric field. Electric field is the main driving force for pore growth during anodization. However, impurities in aluminum can disturb the direction of the electric field. To confirm this, we anodized two different aluminum foil samples with high purity (99.999%) and relatively low purity (99.8%), and compared the differences in the surface morphologies of the respective aluminum oxide membranes produced in different electric fields. Branched pores observed in porous alumina surface which was anodized in low-purity aluminum and the size; dimensions of the pores were found to be usually smaller than those obtained from high-purity aluminum. Moreover, anodization at high voltage proceeds to a significant level of conversion because of the high speed of the directional electric field. Consequently, anodic alumina membrane of a specific morphology, i.e., meshed pore, was produced.

• Journal of Applied Biological Chemistry
• /
• v.63 no.3
• /
• pp.235-241
• /
• 2020

An essential component of the hemostatic process during vascular damage is platelet activation. However, many cardiovascular diseases, such as atherosclerosis, thrombosis, and myocardial infarction, can develop due to excessive platelet activation. Isoscopoletin, found primarily in plant roots of the genus Artemisia or Scopolia, has been studied to demonstrate potential pharmacological effects on Alzheimer's disease and anticancer, but its mechanisms and role in relation to thrombus formation and platelet aggregation have not yet been discovered. This research investigated the effect of isoscopoletin on collagen-induced human platelet activation. As a result, isoscopoletin strongly increased cyclic adenosine monophosphate (cAMP) and cyclic guanosine monophosphate (cGMP) levels in a concentration-dependent manner. In addition, isoscopoletin greatly phosphorylated inositol 1,4,5-triphosphate receptor (IP₃R) and vasodilator-stimulated phosphoprotein (VASP), known substrates of cAMP-dependent kinase and cGMP dependent kinase. Phosphorylation of IP₃R by isoscopoletin induced Ca²⁺ inhibition from the dense tubular system Ca²⁺ channels, and VASP phosphorylation was involved in fibrinogen binding inhibition by inactivating αIIb/β₃ in the platelet membrane. Isoscopoletin finally reduced thrombin-induced fibrin clot production and finally reduced thrombus formation. Therefore, this research suggests that isoscopoletin has strong antiplatelet effects and is likely to be helpful for thrombotic diseases involving platelets by acting as a prophylactic and therapeutic agent.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.768-778
• /
• 2011

Calixpyrroles and related macrocycles are non-planer synthetic anion receptors that have attracted considerable attentions in recent years. Although the synthesis of calix[4]pyrrole (known as meso-octamethylporphyrinogen) was reported more than 100 years ago, the anion binding properties were first discovered in 1996. The simple calix[4]pyrroles can be synthesized in single step in high yield by condensation of pyrrole with acetone. The compounds showed preferential binding for halide anions including fluoride, phosphate, carboxylate, and chloride in organic media. Efforts to improve the anion affinity of calix[4]pyrrole and to enhance its selectivity have led to the synthesis of a variety of new calixpyrrole derivatives. Among the various modifications, introduction of straps on one side of the calix[4]pyrroles are the most effective. Incorporation of aromatic rings other than pyrroles also exhibited interesting binding behaviour. Introduction of signalling units as part of the strapping element enable to detect the anions on chromogenic or fluorogenic fashion. Finding of the anion transport properties across the membrane and cytotoxic effects of the calix[4]pyrroles open new window for calixpyrrole-related research. The polymer-incorporated systems have also been employed as anion complexants in solvent-solvent extraction. These old, yet easy-to-make macrocycles have well advanced more recently with the discovery of the ion-pair complexation properties. In this review, the synthetic developments and anion binding properties of calixpyrroles for the last decades will be discussed and will cover the advances in calixpyrrole chemistry.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.99-110
• /
• 2013

Redox flow batteries are attractive energy-storage devices for renewable energy and peak-power energy control. Even though some prototypes are available already, many new materials are under development for new battery systems. In this reports, redox pairs and theirs properties are explained, by which one can understand issues with redox pairs, such as contaminations, cross-over, ionic selectivity, and solubility. Batteries that have the same redox pairs in both electrode compartments can be operated longer than those with different redox pairs due to the prevention form the cross-contamination. There are undivided redox flow batteries that have no membrane, which is another direction improving cycle life of the batteries.

• Membrane and Water Treatment
• /
• v.5 no.3
• /
• pp.183-195
• /
• 2014

The efficiency of two metal ions (cadmium, zinc) removal from aqueous solutions by ultrafiltration (UF) and Polymer Enhanced Ultrafiltration (PEUF) processes were investigated in this work. The UF and PEUF studies were carried out using an ultrafiltration tangential cell system equipped with 5.000 MWCO regenerated cellulose. A water-soluble polymer: the polyacrylic acid (PAA) was used as complexant for PEUF experiments. The effects of transmembrane pressure, pH, metal ions and loading ratio on permeate fluxes and metal ions removals were evaluated. In UF process, permeate fluxes increase linearly with increasing pH for different transmembrane pressure, which may be the consequence of the formation of soluble metal hydroxyl complexes in the aqueous phase. In PEUF process, above pH 5.0, the Cd(II) retention reaches a plateau at 90% and Zn(II) at 80% for L = 5. Also, cadmium retention at different L is greater than zinc retention at pH varying from 5.0 to 9.0. In a mixture solution, cadmium retention is higher than zinc for different loading ratio, this is due to interactions between carboxylic groups of PAA and metal ions and more important with cadmium ions.