• 제목/요약/키워드: member

검색결과 6,712건 처리시간 0.03초

띠형 강보강재에 설치된 수동저항부재의 설치 특성에 따른 상호간섭계수 평가 (Evaluation on Degree of Interference Based on Installation Characteristics of Transverse Members Installed in Steel Strip Reinforcement)

  • 정성규;홍기권;한중근;이광우
    • 한국지반신소재학회논문집
    • /
    • 제13권3호
    • /
    • pp.11-19
    • /
    • 2014
  • 본 연구에서는 띠형 강보강재에 '${\sqcap}$' 형태의 수동저항부재를 설치하는 보강재에 대한 인발시험 결과를 바탕으로 수동저항부재의 간격 및 설치위치에 따른 간섭효과를 분석하였다. 수동저항부재에서 발현되는 최대수동저항력은 수동저항부재의 설치 위치에 따라 차이가 발생하였으며, 전면벽체에 근접하여 설치된 수동저항부재에서 더 큰 수동저항력이 발현되는 것을 확인하였다. 최대인발력을 사용하여 간섭계수(DI)를 평가한 결과, 지지부재 직경과 간격의 비(S/B)가 동일한 경우에는 수동저항부재의 설치 위치에 따른 인발력 차이를 반영하지 못하는 것으로 평가되었다. 그러나 최대수동저항력을 사용하여 간섭계수(F)를 산정할 경우에는 수동저항부재의 설치 간격뿐만 아니라, 수동저항부재의 설치 위치에 따른 최대수동저항력 차이를 반영하는 것으로 분석되었다.

도시정비사업에서 조합원 입주부담금 결정요인의 영향력 분석 (Influence Analysis of Determinants on Member's Payment in Urban Renewal Project)

  • 김성희
    • 한국산학기술학회논문지
    • /
    • 제16권11호
    • /
    • pp.7690-7697
    • /
    • 2015
  • 본 연구는 사업시행의 핵심요인이라 할 수 있는 경제적 측면에서 조합원의 실질적인 입주부담금에 영향을 미치는 개별요인들의 구조적 인과구조를 밝히고, 모의실험과 실증분석을 통해 그 영향력을 파악하고자 하였다. 분석결과 첫째, 조합원의 실질적인 입주부담금은 조합원에게 적용되는 특별분양가와 일반분양가와의 차익 및 관리처분계획 인가 시점과 입주 시점의 시차에 의해 발생하는 시세차익을 반영하여 결정되는 것으로 나타났다. 둘째, 조합원의 실질적 입주부담금에 영향을 미치는 개별요인들의 민감도를 분석한 결과, 사업구역에 적용되는 계획용적률이 가장 큰 영향을 미치는 것으로 나타났다. 또한 사업구역 내 기반시설 설치 시 비용분담 주체에 따라서도 조합원의 입주부담금은 크게 영향을 받는 것으로 분석되었다. 셋째, 조합원 입주부담금 결정요인들 간의 인과관계를 기초로 구조모형을 설정하고, 이를 구조방정식모형(SEM)을 이용하여 개별요인들이 미치는 영향경로와 영향력을 실증적으로 살펴보았는데 규제요소 및 지역특성요소가 계획요소를 매개로 하여 입주부담금에 영향을 미치는 구조를 나타내었다.

그룹 서명 기법에서의 효율적이고 안전한 구성원 탈퇴 방법 (Efficient and Secure Member Deletion in Group Signature Scheme)

  • 김현정;임종인;이동훈
    • 정보보호학회논문지
    • /
    • 제11권6호
    • /
    • pp.41-51
    • /
    • 2001
  • 그룹 서명 기법은 익명성을 보장해주면서 그룹 구성원들로 하여금 그룹을 대표해서 서명을 할 수 있도록 하는 방법으로 분쟁이 발생하는 경우에는 지정된 그룹 관리자만이 구성원의 신원을 확인할 수 있다. 최근 수 년 동안, 그룹 서명 기법은 집중적으로 연구되어 왔으며 다양한 응용분야에 적용되고 있다. 그러나 그룹의 구성원이 소속된 그룹에서 탈퇴하기를 원하거나 불법행위 등의 이유로 그룹에서 강제 탈퇴되어야 하는 경우가 발생했을 때, 이 상황에 적합한 방법이 구체적으로 제시되어 있지 않다. [3]에서 언급한 바에 의하면 구성원 탈퇴에 따른 복잡도는 그룹 서명을 실생활에 적용하는데 있어 걸림돌이며 따라서 시급히 해결해야 할 문제이다. 이 논문에서 그룹 공개키와 서명 길이는 그룹 크기에 독립적이면서 구성원의 자유로운 탈퇴를 허용하는 효율적인 그룹 서명 기법을 제안한다. 제안한 그룹 서명 기법의 안전성은 RSA 가정에 기반하고 있다. 더 나아가 특정한 구성원이 생성한 서명을 추적해 낼 수 있는 방법도 더불어 제안한다.

브레이스로 보강된 사각형 래티스돔의 좌굴내력 평가 (An Estimation of Buckling-Strength of Braced Rectangular Latticed Domes)

  • 황영민;석창목;박상훈
    • 한국공간구조학회논문집
    • /
    • 제3권4호
    • /
    • pp.69-76
    • /
    • 2003
  • In case of rectangular latticed pattern which shearing rigidity is very small, it has a concern to drop Buckling-strength considerably by external force. So, by means of system to increase buckling-strength, there is a method of construction that lattice of dome is reinforced by braced member. In a case like this, shearing rigidity of braced member increase buckling-strength of the whole of structure and can be designed economically from the viewpoint of practice. Therefore, this paper is aimed at investigating how much does rigidity of braced member united with latticed member bearing principal stress of dome increase buckling-strength of the whole of structure. the subject of study is rectangular latticed domes that are a set of 2-way lattice dome which grid is simple and number of member gathering at junction is small. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems.

  • PDF

운봉 향교 정밀 모니터링을 통한 목재 기둥 부재의 함수율 분포 특성 (Study on Moisture Contents Distribution of Wooden Post Member by Precise Monitoring in Un-Bong Confucian School)

  • 박천영;김광철
    • 한국가구학회지
    • /
    • 제24권1호
    • /
    • pp.104-112
    • /
    • 2013
  • Monitoring for moisture contents of wooden post member of Un-bong confucian school was performed in 6 months and analyzed to conserve scientifically the wooden culture building and open for common people. In inner post member of the building, variation of moisture contents was very small and upper part had relatively higher moisture contents. In outer post member, moisture contents were changed according to the weather conditions and was relatively high in bottom and upper part. Southern post has lower moisture content than eastern. These results were related to air ventilation in interior, depth of eaves and orientation of the building. In the design, construction and maintenance of wooden building, characteristics of wood should be considered like moisture contents.

  • PDF

해석적 방법에 의한 강섬유 보강 초고성능 콘크리트(UHPFRC) 휨부재의 강도 평가 (Strength Evaluation of UHPFRC Flexural Member by Analytical Method)

  • 박우진;황훈희
    • 한국안전학회지
    • /
    • 제28권2호
    • /
    • pp.55-59
    • /
    • 2013
  • The analytical model was constituted to evaluate the flexural strength of UHPFRC(ultra high performance fiber reinforced concrete) member. The analytical approach was attemped to study the effect of the joint and the result compared with the experimental study to verify the analytical model. The calculated value tends to underestimate about 23%~25% in comparison with the experimental result of the jointed test member because the bond stress between precast UHPFRC and cast-in-place UHPFRC surface is not considered in the analytical model. But in the case of the continuous test member, the analytical model provides reasonable results for the flexural strength of UHPFRC member.

프리캐스트 콘크리트 부재설계에서 지식기반시스템의 적용 (Application of Knowledge-Based System in the Design of Pre-cast Concrete Member)

  • 김성중;이승창;이병해
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1995년도 봄 학술발표회 논문집
    • /
    • pp.176-183
    • /
    • 1995
  • The design process of pre-cast concrete member needs various design parameters and the engineer's experiences. The introduction of knowledge-based system in the design of pre-cast concrete member enables us to design complicated members using the designer's heuristics. The objectives of this research are to study useful methodology for representing knowledge and data in the development of knowledge-based system and to show the application of methodology by developing a prototype sysytem for design of pre-cast concrete member. This paper nrst describes methodology for building knowledge-based system. It then presents knowledge-based system for pre-cast concerete member design.

  • PDF

Experimental study on partially-reinforced steel RHS compression members

  • Pinarbasi, Seval
    • Structural Engineering and Mechanics
    • /
    • 제63권3호
    • /
    • pp.385-400
    • /
    • 2017
  • This paper presents an experimental study on the behavior of axially-loaded steel RHS (rectangular hollow section) compression members that are partially reinforced along their lengths with welded steel plates. 28 slender column tests were carried out to investigate the effects of the slenderness ratio of the unreinforced member and the ratio of the reinforced length of the member to its entire length. In addition to the slender column tests, 14 stub-column tests were conducted to determine the basic mechanical properties of the test specimens under uniform compression. Test results show that both the compressive strength and stiffness of an RHS member can be increased significantly compared to its unreinforced counterpart even when only the central quarter of the member is reinforced. Based on the limited test data, it can be concluded that partial reinforcement is, in general, more effective in members with larger slenderness ratios. A simple design expression is also proposed to predict the compressive strength of RHS columns partially reinforced along their length with welded steel plates by modifying the provisions of AISC 360-10 to account for the partial reinforcement.

ACI 직사각형 응력블럭과 실제 응력분포에 부재의 크기가 미치는 영향 (Effects of Member Sizes on ACI Rectangular Stress Block and Actual Stress Distribution)

  • 이성태;김장호;김진근
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.909-914
    • /
    • 2001
  • It is important to consider an effect of concrete member sizes when estimating the ACI rectangular stress block of a reinforced concrete flexural member. However, the experimental data and analytical analyses are still not available for a proper evaluation. For all types of loading conditions, the trend is that the size of an ACI rectangular stress block tends to change when the member sizes change. In this paper, the size variations of strength coefficients for ACI rectangular stress block and actual stress distribution have been studied. Results of a series of C-shaped specimens subjected to axial compressive load and bending moment were adopted from references 1 and 2. The analysis results show that the effect of specimen sizes on strength coefficients for ACI rectangular stress block and actual stress distribution of concrete member was apparent. Thus, the results suggest that the current strength criteria based design practice should be reviewed.

  • PDF