Browse > Article
http://dx.doi.org/10.12814/jkgss.2014.13.3.011

Evaluation on Degree of Interference Based on Installation Characteristics of Transverse Members Installed in Steel Strip Reinforcement  

Jung, Sunggyu (Geotechnical & Geo-Space Engineering, Univ. of Science & Technology)
Hong, Kikwon (School of Civil and Environmental Engineering, Urban Design and Study, Chung-Ang Univ.)
Han, Jung-Geun (School of Civil and Environmental Engineering, Urban Design and Study, Chung-Ang Univ.)
Lee, Kwang-Wu (Geotechnical & Geo-Space Engineering, Univ. of Science & Technology)
Publication Information
Journal of the Korean Geosynthetics Society / v.13, no.3, 2014 , pp. 11-19 More about this Journal
Abstract
This paper describes interference effect analysis of transverse member based on large-scale pullout test results of steel strip reinforcement with '${\sqcap}$' type transverse member. The maximum passive resistance has a difference according to the installed location of transverse member, and the total pullout resistance is increased, when transverse member was closed to the wall facing. The degree of interference confirmed that the install location of transverse member cannot reflect the pullout force differential, if S/B is equal. However, The interference factor based on maximum passive resistance reflected the differential of maximum passive resistance and install location of transverse member.
Keywords
Degree of interference; Interference factor; Steel strip reinforcement; Longitudinal member; Transverse member;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Lee, K. W., Cho, S. D., Han, J. G. and Hong, K. K. (2012), "Evaluation of Strain Distribution and Pullout Strength based on Width and Horizontal Spacing of Geosynthetic Strip", Journal of the Korean Geosynthetics Society, Vol.11, No.2, pp.39-47. (in Korean with English summary)   과학기술학회마을   DOI
2 Palmeira, E. M. and Milligan, G. W. E. (1989), "Scale and other factors affecting the results of pullout tests of grids buried in sand", Geotechnique, Vol.39, No.3, 511-524.   DOI
3 Berg, R. R., Christopher, B. R. and Samtani, N. C. (2009a), Design and Construction of Mechanically Stabilized Earth Walls and Reinforced Soil Slopes - Volume I, U.S. Department of Transportation, Federal Highway Administration, Washington DC, Publication No. FHWA-NHI-10-024(FHWA GEC 011-Vol I).
4 Berg, R. R., Christopher, B. R. and Samtani, N. C. (2009b), Design and Construction of Mechanically Stabilized Earth Walls and Reinforced Soil Slopes - Volume II, U.S. Department of Transportation, Federal Highway Administration, Washington DC, Publication No. FHWA-NHI-10-025(FHWA GEC 011-Vol II).
5 Bergado, D. T., Hardiyatimo, H. C., Cisneros, C. B., Chun, C. J., Alfaro, M. C., Balasubramaniam, A. S. and Anderson, L. R. (1992) "Pull-out resistance of steel geogrids with weathered clay as backfill material", Geotechnical Testing Journal, Vol.15, No.1, pp.33-46.   DOI
6 Hong, K. K. (2011), Evaluation of pullout resistance and design of strip-type reinforcement based on anchorage effect, Ph.D. Thesis, Chung-Ang University. (in Korean with English summary)
7 Horpibulsuk, S. and Niramitkornburee, A. (2010), "Pullout resistance of bearing reinforcement embedded in sand", SOILS AND FOUNDATIONS, Vol.50, No.2, pp.215-226.   DOI
8 Jewell, R. A., Milligan, G. W. E., Sarsby, R. W. and Dubois, D. (1984), "Interaction between soil and grids", Symposium on Polymer Grid Reinforcement in Civil Engineering, London, UK, 18-30.
9 Kim, H. T., Bang, Y. K., Park, S. S. and Kim, H. J. (2003), "An Experimental Study on Pullout Behavior Characteristics of the Steel Strip Reinforcement Bolted with Braced Angles", Journal of the Korean Geo-Environmental Society, Vol.4, No.1, pp.67-75. (in Korean with English summary)   과학기술학회마을
10 Lee, K. W., Cho, S. D., Han, J. G. and Hong, K. K. (2009), "Pullout Resistance of Steel Strip Reinforcement with Transverse Members using Large-scale Pullout Tests", Journal of the Korean Geosynthetics Society, Vol.8, No.4, pp.1-8. (in Korean with English summary)   과학기술학회마을
11 ASTM (2003), Standard test method for measuring geosynthetic pullout resistance in soil, ASTM D 6706-01, ASTM Book of Standards, Volume 04.13, Philadelphia, USA.