• Journal of Dairy Science and Biotechnology
• /
• 제27권1호
• /
• pp.1-12
• /
• 2009

In 2008, baby formula containing melamine was found to be responsible for a large outbreak of renal failure in infants in China. A total of 294,000 infants were hospitalized, and at least 6 babies died due to ingestion of the tainted formula. Melamine contains high levels of nitrogen (>60%), which is used as an indicator of protein content. Therefore, high levels of melamine in infant formula were thought to be the result of deliberate contamination m an attempt to increase its apparent protein content. Following inspections by China's national inspection agency, assorted products from at least 22 dairy manufacturers across China were found to have varied levels of melamine (range: 0.096196.61 mg/kg). Melamine co-exposure with cyanuric acid can induce acute melamine-cyanurate crystal nephropathy, which can lead to renal failure at much lower doses than if either compound were ingested alone. However, currently, there are very few data on melamine analogues other than cyanuric acid. At an expert meeting of the WHO and FAO held to review toxicological aspects of melamine and cyanuric acid on December 14, 2008, a new tolerable daily intake (TDI) of melamine was established that could be applied to the entire population, including infants. Therefore, a risk assessment of the various theoretical melamine contamination levels in infant formula and selected representative foods (other than infant formula and sole-source nutrition products) is urgently needed for Korean babies and children up to 7 years of age. Although the undetectable level regulation for infant formula may be low enough to guarantee the safety of babies under the age of 1 year (including premature babies), the melamine standard of 2.5 ppm for foods other than baby formula could be insufficient to protect the 95th percentile population aged 1~2 years because of this demographic's high consumption of milk, yogurt, and soy milk (hazard index = 1.79). Because TDIs are chronic values intended to protect an individual over his/her lifetime, occasional modest ingestion in excess of the TDI is not likely to be a health concern. However, children aged 1~2 years may have renal systems that are comparatively more sensitive to the crystallization of melamine and its analogues. Therefore, governmental jurisdictions may need to practice more prudent management of food items that could raise the melamine exposure for this population.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.69-77
• /
• 2016

In the present study, polyester-melamine coating systems with natural wood fiber (NWF) were prepared and the effects of NWF on the corrosion protectiveness of the polyester-melamine coating were examined using EIS analysis. From the results, higher average surface roughness was observed with increase of NWF content. Water diffusivity and water uptake into the polyester-melamine coatings with NWF were much higher than that into the pure polyester-melamine coating. The decrease in the impedance modulus |Z| was associated with the localized corrosion on carbon steel, confirming that corrosion protection of the polyester-melamine coatings with NWF well agrees with its water transport behavior.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.75-78
• /
• 2003

This study is to investigate the probability to develop the AE Water-reducing agent which can decrease the bleeding by mixing melamine type super-plasticizer(SP) and methyl cellulose(MC) viscosity agent. According to the result, as the mixing ratio of melamine type SP and MC viscosity agent increases, the bleeding is reduced due to a increase of the air content. When the mixing ratio of melamine type SP and MC viscosity agent is 1:2 and 1;3 at the water content of 165kg/$m^3$ and 175kg/$m^3$ respectively, slump and air content are satisfied and bleeding is reduced to some extent, so this is determined as the mixing ratio of AE water reducing agent for reduction of bleeding. It is prove that the developed AE water reducing agent for reduction of bleeding can reduce the amount of bleeding and prohibit the plastic shrinkage crack by slowing down the bleeding speed. Compressive strength of hardened concrete does not make any difference in comparison with plain concrete.

• Journal of the Korean Wood Science and Technology
• /
• 제49권3호
• /
• pp.274-282
• /
• 2021

Transparent and colorless melamine-urea-formaldehyde (MUF) resins make it difficult to identify the area of wood failure percentage (WFP) in the fracture surface of bonded wood specimens. Therefore, in this study, we develop a method of measuring WFP after the adhesion strength measurement of MUF resins under shear stress. The fractured wood surface of b lock shear strength (BSS) specimens bonded with cold-setting MUF resins at three melamine contents (20%, 30%, and 40%) was marked black, and then, WFP was accurately measured via image analysis. WFP values measured using this method consistently increased with BSS as the melamine content increased, showing the reliability of this new method. The results suggested that this new method is useful and reliable for measuring the WFP of the fracture surface of wood specimens bonded with colorless adhesives such as urea-formaldehyde, MUF, and melamine-formaldehyde resins.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.691-698
• /
• 2010

Magnesium hydroxide-melamine core-shell particles were prepared through the coating of melamine monomer on the surface of magnesium hydroxide in the presence of phosphoric acid. The melamine monomer was dissolved in hot water but recrystallized on the surface of magnesium hydroxide by quenching to room temperature in the presence of phosphoric acid. The core-shell particle was applied to low-density polyethylene/ ethylene vinyl acetate (LDPE/EVA) resin by melt-compounding at $180^{\circ}C$ as flame retardant. The effect of magnesium hydroxide and melamine content has been studied on the flame retardancy of the core-shell particles in LDPE/EVA resin according to the preparation process and purity of magnesium hydroxide. Magnesium hydroxide prepared with sodium hydroxide rather than with ammonia solution revealed higher flame retardancy in core-shell particles with LDPE/EVA resin. At 50 wt% loading of flame retardant, core-shell particles revealed higher flame retardancy compared to that of the exclusive magnesium hydroxide in LDPE/EVA composite, and it was possible to satisfy the V0 grade in the UL-94 vertical test. The synergistic flame retardant effect of magnesium hydroxide and melamine core-shell particles was explained as being due to the endothermic decomposition of magnesium hydroxide and melamine, which was followed by the evolution of water from the magnesium hydroxide and porous char formation due to reactive nitrogen compounds, and carbon dioxide generated from melamine.

• Elastomers and Composites
• /
• 제29권5호
• /
• pp.436-443
• /
• 1994

Melamine resin was mixed with polybutadiene rubber or wood flour in the ranges of $5{\sim}75%(wt.%)$. For mixtures, physical and thermal properties were tested experimentally. Physical properties were mainly influenced on the dispersed states of rubber or wood flour. The highest flexural and impact strength were obtained at wood flour content $65{\times}67%$. Rubber was homopolymerized by hardner, or partially copolymerized with melamine resin. At rubber content $3{\sim}6%$, cured products represented lower modulus without decreasing mechanical strength.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2005

가스발생기용 저 연소속도 HTPB/AP계 고체추진제의 조성에서 냉각제인 Oxamide와 Melamine이 추진제의 연소특성에 미치는 효과를 고찰하였다. 냉각제의 함량을 증가시키면 연소속도와 화염온도가 낮아지고, 두 냉각제의 화염온도에 미치는 영향은 유사하였다. 그러나 냉각제의 열분해 특성 차이로 인하여 Melamine 추진제에서는 비정상적으로 $200{\mu}m$ AP의 일부를 $6{\mu}m$ AP로 대체하면 연소속도가 오히려 감소하는 현상을 나타내었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.921-924
• /
• 2000

The purpose of this paper is to investigate the effects of admixture such as AE water reducing agent and Flyash on properties of cement mortar for floor. As for the effects of AE water reducing agent kinds, fluidity and air content increase in order for melamine type, lignine type and naphtalene type. As Flyash contents increase, fluidity shows high, but air content shows decline tendency. compressive strength according to AE water reducing agent kinds increase in order for melamine type, lignine type and naphtalene type. As AE water reducing agent content increases, it shows to be decreased. As for the effects of Flyash, it retards at early age but at later age it gains high with increase of Flyash contents due to pozzanic reaction. Drying shrinkage shows to be docreased slightly with increase of AE water reducing agent.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.225-232
• /
• 2004

We have successfully synthesized relatively monodisperse and cross-linked melamine-formaldehyde (M-F) microspheres by dispersed polycondensation and subsequent pH adjustment with serum replacement cleaning. The average particle sizes (equation omitted): weight-average and (equation omitted) : number-average), the polydispersity index (equation omitted), the number of particles N$\_$p/ and the gel content of the M-F microspheres were observed by varying the pH, the surfactant concentration, and the polymerization temperature. We observed that both the pH and the polymerization temperature were predominant factors in determining (equation omitted) and N$\_$p/, but the effect that the temperature and pH had on the gel content ( ＞ 94% for all samples) was negligible. The exponents of the slopes of plots of N$\_$p/ versus pH and surfactant concentration were －10 and 0.6, respectively. Particle nucleation and growth were achieved within short periods; the incessant coagulation occurred even in the presence of surfactants.

• Carbon letters
• /
• 제16권1호
• /
• pp.57-61
• /
• 2015

Carbon aerogel is a porous carbon material possessing high porosity and high specific surface area. Nitrogen doping reduced the specific surface area and micropores, but it furnished basic sites to improve the $CO_2$ selectivity. In this work, N-doped carbon aerogels were prepared with different ratios of resorcinol/melamine by using the sol-gel method. The morphological properties were characterized by scanning electron microscopy (SEM). Nitrogen content was studied by X-ray photoelectron spectroscopy (XPS) and the specific surface area and micropore volume were analyzed by $N_2$ adsorption-desorption isotherms at 77 K. The $CO_2$ adsorption capacity was investigated by $CO_2$ adsorption-desorption isotherms at 298 K and 1 bar. Melamine containing N-doped CAs showed a high nitrogen content (5.54 wt.%). The prepared N-doped CAs exhibited a high $CO_2$ capture capacity of 118.77 mg/g (at resorcinol/melamine = 1:0.3). Therefore, we confirmed that the $CO_2$ adsorption capacity was strongly affected by the nitrogen moieties.