• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.227-236
• /
• 2020

This paper derives the insertion loss for the bubble layer of an air bubble curtain and an air masker which are used to reduce ocean anthropogenic noise such as the piling noise and the ship noise. The air bubble curtain is considered as a 'fluid-air bubble layer-fluid' model and the environment for the air masker is simplified as an 'vacuum-thin plate-fluid-air bubble layer-fluid' model. The air bubble layer in each model is assumed as the effective medium which has the complex wavenumber and the complex impedance corresponding to the bubble population distribution. The numerical simulations are performed to examine the insertion loss depending on the bubble population, the void fraction, and the thickness of the layer.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.21-30
• /
• 2014

The temperature change due to focused ultrasound in dissipative acoustic medium is very important because it provides us much information. To measure the temperature change inside of the dissipative acoustic medium non-invasively, we adopt a temperature sensitive film which has thermochromic particles with critical temperature of $30^{\circ}C$. As a dissipative acoustic medium, agar layer is chosen in the study. The temperature change due to the ultrasound was measured depending on the concentration of the sugar in the agar layer. The color change on the film due to the ultrasound was investigated when the concentration of sugar was from 25% to 40%. As the result, there were rapid increases of discolored area on the film within 2~5 second after the ultrasound driving and the increasing rates decreased after the period. To compare the simulation results were also shown. However in the simulated result, the discolored areas linearly increased from start to 10 seconds. The reason of the differences between the experimental results and simulated ones is that the change of thermal conductivity and heat capacity of the medium were not considered in the simulation program.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.6
• /
• pp.577-582
• /
• 2003

This paper describes a new technique for thickness measurement of a very thin layer less than one-quarter of the wavelength of ultrasonic wave used in the ultrasonic pulse-echo measurements. The technique determines the thickness of a thin layer in a tapered medium from constructive interference of multiple reflection waves. The interference characteristics are derived and investigated in theoretical and experimental approaches. Modified total reflection wave g(t) defined as difference between total and first reflection waves increases in amplitude as the interfacial layer thickness decreases down to zero. A layer thickness less than one-tenth of the ultrasonic wavelength is measured using the maximum amplitude of g(t) with a good accuracy and sensitivity. The method also requires no inversion process to extract the thickness information from the waveforms of reflected waves, so that it makes possible to have the on-line thickness measurement of a thin layer such as a lubricating oil film in thrust bearings and journal bearings during manufacturing process.

• 연구논문집
• /
• s.25
• /
• pp.175-184
• /
• 1995

Mechanical properties of the gas nitrocarburized product depend on the surface compound layer and the diffusion zone formed. The compound layer improves the wear resistance, and the corrosion resistance. Though phase composition, pore layer and growth rate of the compound layer varies according to the treatment time, temperature and the kind of the steel substrate, they are strongly influenced by the environmental gas composition. In the current study, the growth behavior of the compound layer and diffusion zone of the carbon steel and the alloy steel upon nitrocarburizing treatment at $570^{\circ}C$, and the phase composition and the variation in the growth rate of the compound layer according to the variation of the gas environment which was the medium of the nitriding and carburizing reaction were investigated.

• Steel and Composite Structures
• /
• v.23 no.6
• /
• pp.623-631
• /
• 2017

Present paper deals with the temperature-dependent buckling analysis of sandwich nanocomposite plates resting on elastic medium subjected to magnetic field. The lamina layers are reinforced with carbon nanotubes (CNTs) as uniform and functionally graded (FG). The elastic medium is considered as orthotropic Pasternak foundation with considering the effects of thermal loading on the spring and shear constants of medium. Mixture rule is utilized for obtaining the effective material properties of each layer. Adopting the Reddy shear deformation plate theory, the governing equations are derived based on energy method and Hamilton's principle. The buckling load of the structure is calculated with the Navier's method for the simply supported sandwich nanocomposite plates. Parametric study is conducted on the combined effects of the volume percent and distribution types of the CNTs, temperature change, elastic medium, magnetic field and geometrical parameters of the plates on the buckling load of the sandwich structure. The results show that FGX distribution of the CNTs leads to higher stiffness and consequently higher buckling load. In addition, considering the magnetic field increases the buckling load of the sandwich nanocomposite plate.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.2
• /
• pp.164-172
• /
• 2007

The purpose of this study was to investigate the properties of yellow layer cake made with bamboo leaf powder. Physical properties of the medium and cake flour with bamboo leaf powder were tested by falling number, farinogram, alveogram and after making yellow layer cake, which were tested by rheometer and water activity etc. We found that falling numbers increased with addition of bamboo leaf powder and adding bamboo leaf powder to the flour decreased peak viscosity, holding strength, final viscosity etc. The p value of the alveogram increased for the flour containing bamboo leaf powder increased, but development time and stability decreased. The water activity of the yellow layer cakes made with bamboo leaf powder decreased during storage, but they did not show significant differences. The results of the sensory test showed that the 3% of addition of bamboo leaf powder had the best scores.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.149-152
• /
• 2008

This study is the result between the variation of fuel moisture and the risk of forest fire through measuring the change of moisture containing ratio on-site and its average analysis for fallen leaves layer, humus layer, and soil layer in the forest. The measurement was performed on six days from the day after a rainfall. The fuel moisture on-site was measured on the day when the accumulated rainfall was above 5.0mm, and the measurements was 2 times in spring and 1 time in fall. From the pine forest which were distributed around Samcheok and Donghae in Kangwondo, three regions were selected by loose, medium, and dense forest density, and the fuel moisture was measured on fallen leaves layer, humus layer, and soil layer in the forest. for six days from the day after a rainfall. The study showed that the moisture containing ratio converged on 3 - 4 days in spring and fall for fallen leaves layer, and the convergence was made more than six days in spring and fall for the humus layer. In the other case of soil layer, the variation of moisture containing ratio after rainfall was not distinguishable regardless of season.

• Journal of Life Science
• /
• v.17 no.8 s.88
• /
• pp.1068-1074
• /
• 2007

Parvalbumin occurs in various types of cells in the retina. We previously reported parvalbumin distribution in the inner nuclear layer of bat retina. In the present study, we identified the parvalbumin-immunoreactive neurons in the ganglion cell layer of the retina of a bat, Rhinolophus ferrumequinum, and investigated the distribution pattern of the labeled neurons. Parvalbumin immunoreactivity was found in numerous cell bodies in the ganglion cell layer. Quantitative analysis showed that these cells had medium to large-sized somas. The soma diameter of the parvalbumin-immunoreactive cells in the ganglion cell layer ranged from 12.35 to 19.12 ${\mu}m$ (n=166). As the fibers in the nerve fiber layer were also stained, the majority of parvalbumin-immunoreactive cells in the ganglion cell layer should be medium to large-sized retinal ganglion cells. The mean nearest neighbor distance of the parvalbumin-immunoreactive cells in the ganglion cell layer of the bat retina ranged from 59.57 to 62.45 ${\mu}m$ and the average regularity index was 2.95 ${\pm}$ 0.3 (n=4). The present results demonstrate that parvalbu-min is expressed in medium to large-sized retinal ganglion cells in bat retina, and they have a well-or-ganized distributional pattern with regular mosaics. These results should be important as they are applicable to a better understanding of the unsolved issue of a bat vision. This data will help to provide fundamental knowledge for the better understanding of the unique behavioral aspects of bat flight maneuverability.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.553-558
• /
• 1995

The purpose of this paper is recovery of the profiles of the wave speed and density from the reflection coefficients of the continuously layered acoustic medium with depth dependent density and wave speed at various angles of incidence. A downward continuation or layer stripping algorithm, which recursively reconstructs the medium in increasing depth and then strips away the effects of the reconstructed portion of the medium, is the method with fewer computations than integral equation procedures. This paper implements an improved downward continuation algorithm that uses reflection data at several angles of incidence and performs a least-squares fitting at each depth. The result is a considerable improvement in performance over the usual downward continuation algorithm.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.