• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.471-478
• /
• 2013

PURPOSE. The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal laser sintering (DMLS) technique. MATERIALS AND METHODS. Five groups of Co-Cr dental alloy samples were manufactured in a rectangular form measuring $4{\times}2{\times}2$ mm. Samples fabricated by a conventional casting technique (Group I) and prefabricated milling blanks (Group II) were examined as conventional technique groups. The DMLS samples were randomly divided into three groups as not annealed (Group III), annealed in argon atmosphere (Group IV), or annealed in oxygen atmosphere (Group V). The nanostructure was examined with the small-angle X-ray scattering method. The Rockwell hardness test was used to measure the hardness changes in each group, and the means and standard deviations were statistically analyzed by one-way ANOVA for comparison of continuous variables and Tukey's HSD test was used for post hoc analysis. P values of <.05 were accepted as statistically significant. RESULTS. The general nanostructures of the samples were composed of small spherical entities stacked atop one another in dendritic form. All groups also displayed different hardness values depending on the manufacturing technique. The annealing procedure and environment directly affected both the nanostructure and hardness of the Co-Cr alloy. Group III exhibited a non-homogeneous structure and increased hardness ($48.16{\pm}3.02$ HRC) because the annealing process was incomplete and the inner stress was not relieved. Annealing in argon atmosphere of Group IV not only relieved the inner stresses but also decreased the hardness ($27.40{\pm}3.98$ HRC). The results of fitting function presented that Group IV was the most homogeneous product as the minimum bilayer thickness was measured (7.11 ${\AA}$). CONCLUSION. After the manufacturing with DMLS technique, annealing in argon atmosphere is an essential process for Co-Cr metal ceramic substructures. The dentists should be familiar with the materials that are used in clinic for prosthodontics treatments.

• The Korean Journal of Rehabilitation Nursing
• /
• v.1 no.1
• /
• pp.51-60
• /
• 1998

The result of studying papers about management of lower back pain published in domestic and foreign nursing and medical magazines in these 10 years is as follows ; 1. General characteristic of lower back pain ; 1) In sex distribution, there were more men than women in 5 papers and more women than men in 4 papers among 9 papers surveryed. 2) In age distribution, thirties to forties of patients had more lower back pain as surveyed by general hospitals and fifties to sixties of patients had more lower back pain as surveyed by oriental medical hospitals. 3) In cause factor, there were 50 to 65% of sprain, 32 to 44% of herniated intervertebral disc and 13 to 29% of degenerative changes. 4) In symtom distribution, there were 26 to 57% of lower back pain, 42 to 65% of lower back pain with radiating pain and 34 to 99% of paravertevral muscle spasm. 5) In period of pain management distribution, 18 to 40% of patients experienced pain for less than 6 months and 59 to 82% of them experienced pain for more than 6 months in 3 papers among 4 papers. 6) In surveying the treatment, 66 to 88% of patients had conservative treatment and there were treatments of general hospital, oriental medicine, self remedy and traditional practice in conservative treatment. 7) In job distribution, 12 to 50% of them were housekeepers, 23 to 31% office workers, 4.6 to 36% blue color workers and 11 to 15% students. 2. As psychological character lower back pain paients had anxiety, depression, anger-hostility, phobic anxiety, neurasthenia, hypochondriasis, and interpersonal sensitivity. 3. To distinguish the cause of lower back pain, plain lumbar roentgenogram, straight leg rasing test, eletromyelogic findings, somatosensory evoked potentials CT and MRI were performed. 4. To relieve lower back pain. epidural adhesiolysis, epidulal injection of local anesthetic in mixture with steroid, lumbar spinal root block, low level laser therapy, acupuncture like transcutaneous nerve stimulation(AL TENS), topical capsaicin and lumbar orthotics were used in medical field, and relaxation technique was used in nursing field. 5. Mckenzie's extension exercise and William's flexsion exercise for lower back pain were used in medical field and Yoga exercise was applied in nursing field. 6. The more school education and self efficacy were high, the better they had active coping lower back pain positively and the less self efficacy was the more they had serious pain. As a result of studying the paper there have been very little research for lower back pain in nursing fields of Korea and foreign countries. Because 60 to 80% of population expeience lower back pain at least more than once, it is necessary to develop the study and clinical practice for management of lower back pain.

• Journal of Intelligence and Information Systems
• /
• v.28 no.1
• /
• pp.217-242
• /
• 2022

With the launch of Artificial Intelligence(AI)-based intelligent products on the market, innovative changes are taking place not only in business but also in consumers' daily lives. Intelligent products have the potential to realize technology differentiation and increase market competitiveness through advanced functions of artificial intelligence. However, there is no new product development methodology that can sufficiently reflect the characteristics of artificial intelligence for the purpose of developing intelligent products with high market acceptance. This study proposes a KANO-QFD integrated model as a methodology for intelligent product development. As a specific example of the empirical analysis, the types of consumer requirements for hair loss prediction and treatment device were classified, and the relative importance and priority of engineering characteristics were derived to suggest the direction of intelligent medical product development. As a result of a survey of 130 consumers, accurate prediction of future hair loss progress, future hair loss and improved future after treatment realized and viewed on a smartphone, sophisticated design, and treatment using laser and LED combined light energy were realized as attractive quality factors among the KANO categories. As a result of the analysis based on House of Quality of QFD, learning data for hair loss diagnosis and prediction, micro camera resolution for scalp scan, hair loss type classification model, customized personal account management, and hair loss progress diagnosis model were derived. This study is significant in that it presented directions for the development of artificial intelligence-based intelligent medical product that were not previously preceded.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.428-434
• /
• 2004

Coarse clumping of solid materials within diseased biological cells can have a marked influence on the light scattering pattern. Perturbations in refractive index lead to distinct varia­tions in the cytometric signature, especially apparent over wide scattering angles. The large dynamic range of scattering intensities restricts collection of data to narrow angular intervals be­lieved to have the highest potential for medical diagnosis. We propose the use of an interfer­ence filter to reduce the dynamic range. Selective attenuation of scattering intensity levels is expected to allow simultaneous data collection over a wide angular interval. The calculated angu­lar transmittance of a commercial shortwave-pass filter of cut-off wavelength 580 nm indicates significant attenuation of scattering peaks below ${\~}\;10^{circ}$, and reasonable peak equalization at higher angles. For the three-dimensional calculation of laser light scattered by cells we use a spectral method code that models cells as spatially varying dielectrics, stationary in time. How­ever, we perform preliminary experimental testing with the interference filter on polystyrene microspheres instead of biological cells. A microfluidic toolkit is used for the manipulation of the microspheres. The paper intends to illustrate the principle of a light scattering detection system incorporating an interference filter for selective attenuation of scattering peaks.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.834-839
• /
• 2012

Recently, mechanical components with miniaturized size, complex shape and fine surface are on demand from industries such as mobile electronics, medical devices and defense. The size of them is smaller than several millimeters, the shape has micro-holes, curve, or multi-step and the surface is mirror-like. This features are not able to be machined with the conventional machining, therefore electro-discharge machining (EDM), cutting, and laser machining have been applied. If the technologies are assisted by vibration, high aspect ratio and good surface are to be achieved. In this paper, prior and current researches of vibration-assisted machining are reviewed. Machining mechanisms with vibration-assisting are explained, their effects are shown, and vibrating apparatuses are discussed. Especially, comparison between with and without vibration assisting is presented. This review shows the vibration-assisted machining is effectively fabricate the components with small and complicated shape and fine surface finish.

• Annals of Clinical Neurophysiology
• /
• v.12 no.2
• /
• pp.35-46
• /
• 2010

Various electrophysiological tests have provided a large body of valuable information on neuronal responses to a presented stimulus. The special and general somatic sensory pathways are main targets of evoked potentials. Two types of evoked potentials, exogenous and endogenous, are commonly used. Exogenous evoked potentials of general and special somatic sensory systems will be reviewed. One of general somatic sensory functional pathways, proprioception, can be evaluated by general somatosensory evoked potentials with electrical stimulation on nerves. The special somatosensory functional pathways, including vision, and audition, can be evaluated by visual evoked potentials and auditory evoked potentials. Also laser-evoked potentials are newly developed for pain pathway, including lateral spinothalamic pathway, and vestibular myogenic evoked potentials for sacculocollic pathways. The evoked potentials of sensory system have maximal clinical utility in evaluating functional deficits along the sensory pathways. They are used for evaluating comatose patients, hysterical patients, premature infants, patients with suspected demyelinating diseases or neoplasms, and research. We discuss the neurophysiologic tests of sensory systems in views of practical points. The organized evaluation of sensory electrophysiologic tests can be helpful in detecting and estimating the abnormalities in neurological diseases.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.555-560
• /
• 2002

치근부 민감성 (hypersensitivity)은 부분적으로 치근면에서의 개방된 상아세관이 존재하는 것에 기인한다고 생각되며 이러한 치근부의 개방된 상아세관은 치경부 병소 (cervical lesion)에 주로 존재하는데 이는 칫솔질에 의한 마모(toothbrush abrasion), 화학적 침식 (chemical erosion), 또는 abfraction 등의 결과로 나타난다고 한다. 이미 Nd-YAG 레이저를 이용한 실험에서 레이저를 조사한 상아질 표면의 상아 세관 구경이 감소되고 상아세관의 폐쇄가 많이 증가되는 양상을 관찰한 바 있다. 이 실험의 목적은 고출력레이저인 Nd-YAC 레이저를 이용한 상아질 표면처치의 임상사용가능성을 좀 더 상세히 평가하기 위해 상아질에 레이저를 처리한 후 기계적으로 마모시킨 경우 상아질 표면의 변화를 관찰하는 것이다. 50개의 발치된 치아의 상아질을 노출시켜 표면을 연마한 후 대조군에서는 37% 인산으로 산부식하여 상아 세관을 노출시킨 후 레이저를 조사하였고, 실험군에서는 대조군과 같은 조건으로 산과 레이저로 처리된 상아질 표면을 15, 45, 90 그리고 180분 동안 전동 칫솔로 기계적으로 마모시켜 그 표면을 주사전자현미경으로 관찰한 결과, 대조군, 칫솔질을 15, 45분간 시행한 실험군에서는 상아 세관 입구가 10% 이내에서 노출되었고 50 그리고 180분간 칫솔질을 시행한 실험군에서는 45 그리고 48%의 상아세관 입구의 노출이 관찰되었다. 그러므로 Nd-YAC레이저의 조사는 상아질 표면에서 축적 시간이 45분 이상에서 90분 이하인 기계적 마모에 의한 상아 세관 입구의 노출을 억제할 수 있을 것이라 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.3
• /
• pp.443-447
• /
• 1996

Angiolymphoid hyperplasia with eosinophilia(ALHE) is an uncommon, benign vascular proliferation with the background of a stroma which is heavily infiltrated by lymphocytes and eosinophils and includes lymphatic follicles with prominent germinal centers. ALHE primarily involves the skin and subcutis in head and neck as various forms of nodules. There has been considerable controversy about the relationship between ALHE and Kimura's disease. Kimura's disease, originally reported by Kimura et el., is an unusual granulation with proliferation of lymphoid tissue. Wells and Whimster published the first report describing a condition that resembled Kimura's disease and designated it as ALHE. For a time being two lesions are thought to be same lesion, but recently they are considered as two different entities, histopathologically. The cause of this disease remains unknown, and physicians have used a variety of treatment modalities including cryosurgery, steriod therapy, electrodesiccation, curettage, radiotherapy, laser therapy and surgical excision. But any treatment modality leaves problem of recurrence because the lesion is not well encapsulated. Being poorly encapsulated, the lesion's remnants are apt to be left and this markes some problems : recurrence and possible adjacent organ injury. In this case we misdiagnosed the lesion as well encapsulated benign mass. We performed excisional biopsy and experienced prolonged operation time and unwanted mentalis muscle injury. We think that the importance of poor encapsulation of ALHE should be stressed. So we report our experience with literature review.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.47-50
• /
• 1991

LPM(Linear Pulse Motor) provide direct and precise position control of bidirectional linear motion. LPM is not subject to the same linear velocity and acceleration limitations inherent in systems converting rotary to linear motion such as lead screws, rack and pinion, belt and pulley drives. With LPM, all the thrust force generated by the motor is efficiently applied directly to the load. And speed, distance, and acceleration are easily programmed in a highly repeatable fashion. Potential industrial and application fields of LPM include PCB assembly, industrial sewing machines, automatic inspection, coil winder, medical uses, conveyer system, laser cut and trim systems, semiconductor wafer processing, OA instruments etc. This paper describes various design parameter of LPM such as magnetic ciucuit construction methods, phase number and tooth number per pole, permanent magnet and coil mmf, tooth geometries. And to solve the problems of existing control methods, in this paper, a new control method of the LPM is proposed throughout modern control theory.

• Journal of Biomedical Engineering Research
• /
• v.31 no.2
• /
• pp.99-105
• /
• 2010

In order to obtain velocity profile of blood flow with high spatial resolution, a micro PIV technique consisted of a fluorescent microscope, double-pulsed YAG laser, cooled CCD camera was applied to in-vitro blood flow experiment through a micro round tube of a diameter $100{\mu}m$. Velocity distributions of blood flow for rabbit were obtained. The viscosity profiles for shear rate were found at flowing condition. To provide hemorheological characteristics of blood flow, the viscosities for shear rate were evaluated. The viscosity of blood also steeply increase by decreasing shear rate resulting in Non-Newtonian flow, especially in low shear rate region caused by RBC rheological properties. The results show typical characteristics of Non-Newtonian characteristics from the results of velocity profile and viscosity for blood flow. From the inflection points, cell free layer and two-phase flow consisted with plasma and suspensions including RBCs can be separated.