• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6435-6439
• /
• 2012

Chemoresistance to cancer therapy is a major obstacle to the effective treatment of human cancers with cisplatin (DDP), but the mechanisms of cisplatin-resistance are not clear. In this study, we established a cisplatin-resistant human ovarian cancer cell line (COC1/DDP) and identified differentially expressed proteins related to cisplatin resistance. The proteomic expression profiles in COC1 before and after DDP treatment were examined using 2-dimensional electrophoresis technology. Differentially expressed proteins were identified using matrix-assisted laser desorption/ ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and high performance liquid chromatography-electrospray tandem MS (NanoUPLC-ESI-MS/MS). 5 protein spots, for cytokeratin 9, keratin 1, deoxyuridine triphosphatase (dUTPase), aarF domain containing kinase 4 (ADCK 4) and cofilin1, were identified to be significantly changed in COC1/DDP compared with its parental cells. The expression of these five proteins was further validated by quantitative PCR and Western blotting, confirming the results of proteomic analysis. Further research on these proteins may help to identify novel resistant biomarkers or reveal the mechanism of cisplatin-resistance in human ovarian cancers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5371-5374
• /
• 2013

Objective: Photodynamic therapy (PDT) is an emerging therapeutic procedure suitable for the treatment of cervical cancer. However, the side effects of PDT are severe, including skin ulceration, so we designed an experiment to examine the effects of multiple low-dose photodynamic therapy of 5, 10, 15, 20-tetrakis(1-methylpyridinium-4-yl) porphyrin (Tmpyp4) on tumour growth by utilizing a model in nude mice implanted with Hela cervical cancer cells. Materials and Methods: Female BALB/c nude mice (aged 5-6 weeks, weighing 18-20 g) were used. Hela cervical cancer cells were injected subcutaneously ($1{\times}10^7cells/200{\mu}L$). Ten days after injection, the mice were divided into three groups (n=6), the A group of controls without any treatment, the B group receiving a single-treatment with Tmpyp4 (10 mg/kg, intratumor injection) and irradiation (blue laser, $108J/cm^2$), and the C group given three-treatments with Tmpyp4 (10 mg/kg, intratumor injection) and irradiation at intervals of two days. After starting treatment, tumours were measured every two days, to assess growth. At 2 weeks after the last treatment of C group, tumour tissue and organs were collected from each mouse to evaluate tumor histology and organ damage. Results: Tumour growth in C group was significantly inhibited compared with A and B groups (P<0.05), without any injury to the skin and internal organs. Conclusion: Our novel findings demonstrated that multiple low-dose photodynamic therapy of Tmpyp4 could inhibit cervical cancer growth significantly with no apparent side effects.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.256-262
• /
• 2019

Extensive tumor resection accompanied by radiotherapy and chemotherapy is the standard of care for malignant gliomas. However, there is a significant obstacle to the complete resection of the tumor due to the difficulty of distinguishing tumor and normal brain tissue with a conventional surgical microscope. Recently, multiple studies have shown the possibility of fluorescence-guided surgery in malignant gliomas. The most used fluorescence dyes for brain tumor surgery are 5-aminolevulinic acid (5-ALA) and indocyanine green (ICG). In this paper, a new fluorescence guided operation system, which can detect both 5-ALA and ICG fluorescent images simultaneously, is presented. This operation system consists of light emitting diodes (LEDs) which emits 410 nm and 740 nm wavelengths. We have performed experiments on rats in order to verify the operation of the newly developed operation system. Oral administration and imaging were performed to observe the fluorescence of 5-ALA and ICG fluorescence in rats. When LEDs at wavelengths of 410 nm and 740 nm were irradiated on rats, 628 nm wavelength with a violet fluorescence color and 825 nm wavelength with a red fluorescence color were expressed in 5-ALA and ICG fluorescent material, respectively, thus we were able to distinguish the tumor tissues easily. Previously, due to the poor resolution of the conventional surgical microscope and the fact that the color of the vein is similar to that of the tumor, the tumor resection margin was not easy to observe, thus increasing the likelihood for cancer recurrence. However, when the tumor is observed through the fluorescence guided operation system, it is possible to easily distinguish the color with the naked eye and it can be completely removed. Therefore, it is expected that surgical removal of cancerous tumors will be possible and surgical applications and surgical microscopes for cancer tumor removal surgery will be promising in the future.

• Journal of radiological science and technology
• /
• v.46 no.3
• /
• pp.219-229
• /
• 2023

In this study, basic characteristics such as reproducibility, linearity, and directionality of RPL glass dosimeters were evaluated to improve the reliability of dose evaluation through RPL glass dosimeters, and uncertainty elements such as sensitivity by glass element and magazine slot sensitivity were evaluated. Using a mathematical model to calibrate the measured values of the RPL glass dosimeter, the measurement uncertainty was calculated assuming an example. As a result of the characteristic evaluation, the RPL glass dosimeter showed excellent performance with a standard deviation of ±1% (1 SD) for the reproducibility of the reading process, a coefficient of determination for linearity of 0.99997. And the read-out of the RPL glass dosimeter are affected by the circular rotation direction of the glass dosimeter during irradiation, fading according to the period after irradiation, the number of laser pulses of the reader, and response degradation due to repeated reading, it is judged that measurement uncertainty can be reduced by irradiation and reading in consideration of these factors. In addition, it was confirmed that the dose should be determined by calculating the correction factors for the sensitivity of each element and, the sensitivity of each reading magazine slot. It is believed that the reliability of dosimetry using glass dosimeters can be improved by using a mathematical model for correction of glass dosimeter readings and calculating measurement uncertainty.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.37 no.1
• /
• pp.69-85
• /
• 2024

Objectives : By analyzing articles on xerostomia and burning mouth syndrome, two representative diseases that cause various symptoms in oral cavity. Methods : We analyzed articles by dividing them into review articles, original articles, case reports. The subjects were 11 articles on xerostomia and 13 articles on burning mouth syndrome published in Korean medical journals. Results : 1. The subjects were 11 articles on xerostomia and 13 articles on burning mouth syndrome published in Korean medical journals. 2. The first article was published in 2007 and the most published articles were three each in 2013, 2018 and 2022. 3. Classification by type of article was as follows: 2 review articles(8.3%), 16 original articles(66.7%) and 6 case reports(25.0%). 4. The journal with the most published articles was journal of internal Korean medicine and the topics were xerostomia(72.7%), burning mouth syndrome(76.9%). 5. For both diseases, the number of female patients was higher than that of male patients. 6. The main symptom of xerostomia is dryness in the mouth and the main symptom of burning mouth syndrome is pain in the oral cavity. 7. Questionnaires, diagnosis based on dialectics and diagnostic devices were used to diagnose xerostomia and burning mouth syndrome. Conclusion : Diagnosis of xerostomia and burning mouth syndrome require overall consideration the entire hum an body along with the oral cavity. Since there are many different diagnostic methods, appropriate methods must be carefully selected and used.

• Journal of Biomedical Engineering Research
• /
• v.37 no.4
• /
• pp.134-139
• /
• 2016

US Food and Drug Administration (FDA) approved as a innovative cure for cancer, 1996. The effect is death of cancer cells through necrosis, apoptosis. Mainly the Continuous Wave mode (CW) use for PDT Laser. It sting, the question including itch, and etc. Reportedly, the increase of temperature with the perforated edema, ulcer, necrosis. The Thermal relaxation time and Oxygen recovery time is necessary. To give a normal oxygen recovery time of the cell, used Pulse mode. Progress, it was Burst Pulse mode when easing the thermal wake, the simplicity was secured, the PDT effect is good. Excepted in control group CW, Pulse, Burst pulse mode were incubated with various concentrations of 5-aminolevulinic acid hydrochloride (ALA-5). The tumor size reduction CW mode (44%), Pulse mode (48%), Burst pulse mode (53%) at 4 week after PDT with 0.3, 0.3, 0.3 mg/ml of ALA-5. After 4 hours, investigation of 100, 100, $100J/cm^2$ laser irradiation. The pulse mode was superior in expirimental data analysis. And it was the Burst pulse mode edge head of a family effect.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.2
• /
• pp.168-172
• /
• 1999

The antifungal mechanism of the antifungal peptide against Aspergillus fumigatus, $K^{18,19}$-CA(l-8)-ME(l-12), derived from cecropin A(l-8)-melittin(l-12) was investigated by confocal laser scanning microscopy, cell wall regeneration, ATPase activity inhibition, and released potassium ion. By confocal laser scanning microscopy, $K^{18,19}$-CA(l-8)-ME(l-12) was detected on the surface of A. fumigatus, while cecropin A used as a negative control peptide was not detected. The protoplast of A. fumigatus treated with$K^{18,19}$-CA(1-8)-ME(1-12) failed to regenerate the fungal cell walls. Compared with cecropin A, the amount of potassium ion released by $K^{18,19}$-CA(l-8)-ME(l-12) was increased. Furthermore, $K^{18,19}$-CA(l-8)-ME(l-12) inhibited the ATPase activity on the plasma membrane. These results suggested that $K^{18,19}$-CA(l-8)-ME(1-12) acts on the plasma membrane of A. fumigatus and its antifungal action is due to the ion channel or pore formation on the plasma membrane.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.667-673
• /
• 2015

A laser diode(LD) has been studied in many fields what medical, industrial processing, sensor, advertising equipment, printing equipment. And the LD is being used in industry. However, LD will require precision handling. Therefore, the actual use of LD is limited to areas of specialization. In this study, attend to the characteristics of the LD what weak to electrostatic and physical impact, current and heat. And will make a sample module that use comfortably a various wavelength LD. Furthermore, Furthermore, through the printing CTP(Computer to Plate) equipment used the 128-channel LD-Driver, compares it with a 64-channel CTP device about the print speed and resolution. And will solved the problem of delay between the dot and the dot. Finally, consider the potential of the 256-channel LD-Driver.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.30-33
• /
• 2003

In this paper the advantage of web technology applied to Rapid Prototyping is discussed. Two fabrication processes are chosen to be web-enabled. One, a post-process of FDM is developed to provide translucent plastic parts made of medical grade ABS material. The other, a system to fabricate laser machined Light Guide Panel is developed. In order to show the timesaving characteristics of the web-based tools, two websites are implemented (http://nano.gsnu.ac.kr/fdm ＆ http://nano.gsnu.ac.kr/laser). The 3-tier architecture is applied for the Internet communication between designers and manufacturing sites, The integrated design tools and physical manufacturing processes enable designers to submit a new design and to receive the fabricated parts in an expedited manner. Example parts are fabricated using the web-based system to prove the concept of the web-based design and Rapid Prototyping.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3351-3355
• /
• 2013

Photodynamic therapy (PDT) is a promising cancer treatment modality that uses dye-sensitized photooxidation of biologic matter in target tissue. This study explored effects of the photosensitizer BCPD-17 during PDT for osteosarcoma. LM-8 osteosarcoma cells were treated with BCPD-17 and cell viability after laser irradiation was assessed in vitro with the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay. The effects of BCPD-17 during PDT recurrence were then examined on tumor-bearing mice in vivo. BCPD-17 had dosedependent cytotoxic effects on LM-8 osteosarcoma cells after laser irradiation which also had energy-dependent effects on the cells. The rate of local recurrence was reduced when marginal resection of mice tumors was followed by BCPD-17-mediated PDT. Our results indicated BCPD-17-mediated PDT in combination with marginal resection of tumors is a potentially new effective treatment for osteosarcoma.