• Title/Summary/Keyword: medical equipment

Search Result 1,268, Processing Time 0.026 seconds

Test Method Using VOC Analyzer to Measure VOC Emission of Paints for Wood-based Panel (VOC Analyzer를 이용한 목재용 도료의 휘발성유기화합물의 간이측정)

  • Eom, Young Geun;Kim, Ki-Wook;An, Jae-Yun;Kim, Hyun-Joong;Moon, Suck-Joong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.6
    • /
    • pp.65-72
    • /
    • 2007
  • The VOC (volatile organic compound) analyzer is devised to measure the four main aromatic hydrocarbon gases: toluene, ethylbenzene, xylene and styfene. It is not affected by ambient temperature and humidity. In addition, standby and measuring time of VOC Analyzer is a short as below 30 min and 8 min, respectively. Since the semiconductor gas sensor is supersensitive to gas components, it is not necessary to use a conventional gas concentrator or other complicated equipment. In this study, VOC emission behavior from 4 types paints (lacquer, urethane vanish, water-base paint, enamel paint) for wood-based panel was investigated using VOC Analyzer. After a specimen was spreaded on aluminum foil ($6.32{\times}6.32cm$) in $3{\ell}$ polyester bag, after 24 hours we could measure maximum VOC emission level that is a stabilized VOC value. Xylene of VOCs was high emitted from lacquer, urethane vanish and water-based paint, and TVOC (Toluene + Ethylbenzene + Xylene + Styrene) of lacquer was the highest emission concentration than another.

Importance of Education Contents and Competencies on Home Care Nursing of the Hospital and Public Health Nurses in Korea (임상간호사와 보건간호사가 지각한 가정간호 교육내용의 중요도 및 업무수행능력)

  • Yu, Sook-Ja;Kim, Soon-Lae;Baek, Hee-Chong;Lee, Jong-Eun
    • Journal of Home Health Care Nursing
    • /
    • v.7 no.1
    • /
    • pp.5-14
    • /
    • 2000
  • This study was conducted during the time period of September 1997 to February 1999. in order to provide data concerning important facets of horne care nursing and the degree to which practicing hospital and public health nurses believe themselves to be competent in each area. The study subjects consisted of 610 hospital nurses, 158 public health nurses and 21 other nurses from Seoul and the province of Kyunggi. Korea. Data was collected through self-reporting questionnaires which was used by Kim et al.(1999) to evaluate the status of home health nursing and the varying ideas of self-competence that practicing nurses have. The results of the study were as follows: 1) The mean scores of perceived important components and competencies on home health nursing measured on the Likert 4 point scale were $3.15{\pm}0.36$ for importance. and $2.56{\pm}0.36$ for competency. Of the four categories regarding nursing services, the 'Nursing skill' factor had the highest importance and competency. 2) There were significantly higher scores for hospital nurses' importance components and competencies of home care nursing as compared to those scores for public health nurses. 3) The significant factors of the importance component of home care nursing listed in order of priority were 'general infection control', 'bed sore care skill', 'rehabilitation care', 'keeping maintenance of the client's confidentiality', 'malpractice', 'diabetes patient care', 'ability for problem solving' respectively. In contrast, of low priority in the importance components of home care nursing were 'referring nursing as a job to others'. 'record keeping', 'family dynamics', 'medical equipment', 'economic problems', 'environmental assessment', 'suture removal', 'multidisciplinary coordination' respectively. 4) The high priority of the degree to which practicing nurses believe themselves to be competent in home health nursing were the 'blood sugar test', 'enema skill', 'injection skill', 'skin care', 'bed sore care skill', etc. In contrast, lower competence for home care nursing as perceived by nurses were 'AIDS care', 'family violence care', 'substance abuse care', 'mental health care' respectively.

  • PDF

Three-Dimensional Approaches in Histopathological Tissue Clearing System (조직투명화 기술을 통한 3차원적 접근)

  • Lee, Tae Bok;Lee, Jaewang;Jun, Jin Hyun
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.52 no.1
    • /
    • pp.1-17
    • /
    • 2020
  • Three-dimensional microscopic approaches in histopathology display multiplex properties that present puzzling questions for specimens as related to their comprehensive volumetric information. This information includes spatial distribution of molecules, three-dimensional co-localization, structural formation and whole data set that cannot be determined by two-dimensional section slides due to the inevitable loss of spatial information. Advancement of optical instruments such as two-photon microscopy and high performance objectives with motorized correction collars have narrowed the gap between optical theories and the actual reality of deep tissue imaging. However, the benefits gained by a prolonged working distance, two-photon laser and optimized beam alignment are inevitably diminished because of the light scattering phenomenon that is deeply related to the refractive index mismatch between each cellular component and the surrounding medium. From the first approaches with simple crude refractive index matching techniques to the recent cutting-edge integrated tissue clearing methods, an achievement of transparency without morphological denaturation and eradication of natural and fixation-induced nonspecific autofluorescence out of real signal are key factors to determine the perfection of tissue clearing and the immunofluorescent staining for high contrast images. When performing integrated laboratory workflow of tissue for processing frozen and formalin-fixed tissues, clear lipid-exchanged acrylamide-hybridized rigid imaging/immunostaining/in situ hybridization-compatible tissue hydrogel (CLARITY), an equipment-based tissue clearing method, is compatible with routine procedures in a histopathology laboratory.

The Relationship Between Systemic Diseases and Oral Volatile Sulfur Compound (전신질환과 구취의 휘발성 황화합물 상관관계)

  • Ok, Soo-Min;Tae, Il-Ho;An, Yong-U;Ko, Myung-Yun
    • Journal of Oral Medicine and Pain
    • /
    • v.34 no.1
    • /
    • pp.11-21
    • /
    • 2009
  • This study was conducted to investigate the relationship between systemic diseases and oral malodor. The author measured the volatile sulfur compound(VSC) of the patients who visited Pusan National University Health Promote Center for a comprehensive medical testing. The patients were examined gingival bleeding on probing, CPI index, tongue coating. Their systemic diseases were diagnosed by the specialist. 182 patients consisted of 112 males and 70 females. In this study, Oral $Chroma^{(R)}$ was used to measure oral malodor. This equipment could measure the concentration of intraoral VSC (hydrogen sulfide, methyl mercaptan, dimethyl disulfide). All data were analylized using Statistical Package for the Social Science $12.0^{(R)}$. The result of this study was the followings. 1. There was significant difference of numbers of patient who visited health care center according to the VSC concentration level and the Community Periodontal Index, bleeding on probing, tongue coating. 2. The subjects with hyperlipidemia showed the high level of $CH_3SH$ concentration (p=0.036). The concentration of $H_2S$ tends to be high in the group with abnormal findings on pulmonary fuction test(p=0.086). The concentration of $CH_3SH$ in the groups with abnormal findings on lipid profile test(p=0.130) and bone mineral density test(p=0.099) and abdominal ultrasonograpy(p=0.088) tends to be higher than the other group. 3. The concentration of $(CH_3)_2S$ in the group with abnormal findings on blood pressure test(p=0.113), hepatitis B virus serology(p=0.069), Abdominal ultrasonograpy(p=0.091) tend to be higher than the other group.

A Study on Health Care Activities of Some Industrial Nurses and their Related Factors in Kyungnam Area (경남지역 일부 산업간호사의 보건관리 업무 및 관련요인에 관한 연구)

  • Kim, Young Sook
    • Korean Journal of Occupational Health Nursing
    • /
    • v.4
    • /
    • pp.48-57
    • /
    • 1995
  • The purpose of this study was to assess the performance of the role and function of some industrial nurses and to characterize the factors affecting the performance of their activities. Thus the results could be used to suggest the direction in the performance of industrials nurses' activities effectively. During a period from January 10 to March 31, 1994, the data were collected from 87 industrial nurses, who were working as health managers in the plants, in Ulsan city and the vicinity in Kyungnam province, using a structured questionnaire. The results were as follows : 1. The general characteristics of industrial nurses in this study were 82.8% being 30 years old or less, 60.9%, being not married, and 93.1% having eduction levels above junior college. 2. With respect to general work conditions, 94.3% were working in a separate room provided for health care division, 40.2% working under the safety and health department, and 98.9% working as common-level staffs. And 60.9% were working less than 44 hours a week, 70.1% had work experiences less than 5 years, and 50.6% had annual incomes ranging 10 to 14 million wons. 3. As work conditions related to health care activities, 49.4% performed the activities not related to health care as always or occasionally, and 87.4% answered that occupational physicians were appointed in their plant and among them, however, only 6.9% worked on full-time basis and 52.8% perform little activities as occupational physicians. For a decision related to health care activity, 69.0% discussed the problems with the supervisors, and 19.5% made decisions by themselves. 4. As for attitude and perception to their activities as health managers, 66.7% moderately recognized the importance of health manager in the workplace, with 63.2% being satisfied their wages and treatment from the company, 57.5% being satisfied with their job positions and 51.7% having positive attitudes as being health managers. 5. The degree of performance at least in one of health related activities were very high in activities such as general medical care(100%), general health examination(98.0%) and specific health examination(100%), and relatively high in health education(72%), new employee health examination(60.9%), document handling(79.3%) and activity for work environment(70.1%). However, the performance rate was very low in preparing protective equipment (20.8%). 6. The levels of activities related to health care were significantly high when making decisions by themselves, when occupational physicians not being full-time, and when satisfying their job positions, and, on the other hand, significantly decreased as work hours increased. 7. In addition to some kinds of periodic education asked by all of the nurses, 89.7% wanted a specialized licensing system for industrial nurse, and 97.4% wanted to apply for the license test. As a conclusion, it is suggested that industrial nurses should be given more authority and placed in more self-controlled system to perform health care and other activities more efficiently, and the role and function of the occupational physician should be clearly distinguished from that of the industrial nurse as a health manager to avoid an unnecessary overlapping.

  • PDF

Analysis for Case Study of Quality Management System to Solve Corporate Problems (기업의 문제해결을 위한 품질경영시스템 적용사례 분석)

  • Seo, Suwon;Jeong, Jongpil
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.18 no.4
    • /
    • pp.191-203
    • /
    • 2018
  • Identify the effects of ISO quality management system on the durability of the enterprise by applying it to early startups and small - and medium-sized enterprises. In particular, the quality management system of a technology start-up small and medium sized companies is important in applying the management system to the financial, management and quality control services rather than to research and development. The quality management system is applied to the medical equipment manufacturers, mobile phone brokers, foreign Chinese companies, and components manufacturers for diesel engines.Try it. Check the case where the quality management system has been applied to the company concerned and the nonconformities have been improved. In addition, the success of the project was determined by applying the quality control system to maintain the stability and perpetuation of the company through the case of the failed selection. The company explains that recently, it must appoint internal auditors to carry out continuous improvement activities and that those who want the development and continuity of the company must reflect the quality management system.

KCCH Medical Cyclotron Operation for Neutron Therapy and Isotope Production (1989) - A Technical Report - (중성자 치료와 동위원소 생산을 위한 KCCH 의학용 싸이클로트론의 운영 (1989))

  • Kim, Byung-Mun;Kim, Young-Sear;Bak, Joo-Shik;Lee, Jong-Du;Yoo, Seong-Yul;Koh, Kyung-Hwan
    • Journal of Radiation Protection and Research
    • /
    • v.15 no.2
    • /
    • pp.113-122
    • /
    • 1990
  • After four years of planning, equipment acquisition, facility construction and beam testing, the KCCH cyclotron facility was put into operation in November1986. Now the KCCH cyclotron(MC-50) has been used for four years in neutron therapy and radioisotope production. Up to December 1989, 179(1852 sessions) patient have undergone neutron therapy. Radioisotope production for nuclear medicine use was started from March 1989 after extensive work to overcome target transport, target melting, beam diagnostic and chemical processing problems. This status report introduces the cyclotron facility, and the experiences of neutron therapy and isotope production with the MC-50 cyclotron. Besides, the operation results and the general troubles of the MC-50 during 1989 are summarized. Total operation time was 1252.5 hours. Four hundred hours were used for neutron therapy of 599 treatment sessions and 832.5 hours for radioisotope production. Total amount of produced raioisotope was 1695 mCi(Ga-67 : 1478mCi, Tl-201 : 107 mCi, I-123 : 25mCi, In-111 : 85mCi). Twenty hours were used for scheduled beam testing. In 1989, 882% of the planned operation were performed on schedule and this rats is improved remarkably compared to 71.0% in 1988.

  • PDF

Phantom of the AAPM CT imaging evaluation Studies on the quantitative analysis method (CT 정도관리 영상의 정량적 분석방법에 관한 연구)

  • Kim, Young-su;Ko, Seong-Jin;Kang, Se-Sik;Ye, Soo-young
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.05a
    • /
    • pp.271-274
    • /
    • 2016
  • CT quality assurance imaging evaluation and enforcement as quantitative assessment by phantom image evaluation, assessment items include There are also contrasting the water attenuation coefficient, uniformity, noise, resolution, spatial resolution, 10mm slice thickness evaluation, contrast resolution, space for the resolution, the slice thickness evaluation, it is possible to estimate the error due to the evaluation by the subjective judgment of the tester, using a subjective error image processing program to be computed to minimize the objective evaluation. Basic recording conditions of the CT image quality control assessment is the same as special medical equipment quality control checks, the images were evaluated quantitatively using IMAGE J. For a CT attenuation coefficient, the uniformity, noise evaluation, were evaluated as CT quality control image the standard deviation of the measured value of the digital processing of image smaller and less noise uniform images than the, contrast and resolution assessment is the size of the diameter of a circle having a large the 1 inch, 0.75 inch, 0.5 inch quality if the diameter of the circle, was evaluated in the small circle in the near circle ellipse. Spatial resolution is evaluated by using a self-extracting features of an image processing program, all of the groups of members comprising the acceptance criteria to automatically extract, was evaluated to be very useful for the quantitative assessment. When CT image quality control assessment on the basis of the results such as the above, if using an image processing program to minimize the subjective judgment of the error evaluator and is determined more efficient than would be made quantitative evaluation.

  • PDF

Application of Skin Color Analysis about Digital Color System for Oriental Medicine Observing a Person's Shape and Color Implementation (한방 찰색 구현을 위한 디지털 색체계의 피부색 분석에의 적용)

  • Lee, Se-Hwan;Cho, Dong-Uk;Kim, Bong-Hyun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.2C
    • /
    • pp.184-191
    • /
    • 2008
  • Oriental base diagnosis method is not going to hospital different from Oriental medicine and because of the possible disease diagnosis through the network and many communication equipment. Especially diagnosis development using ocular inspection method aspect of Oriental medicine among an aging society advance into cut the medical cost for contribution. Ocular inspection method the most important look at disease color that is Observing a Person's Shape and Color which is implementation the development of methodology and important the build of application ability system. So in this paper study observing a person's shape and color implementation of ocular inspection. Specially body's the five viscera presentate the five colors disease color in face that is important the color coordinate system thesis so that proceed the experiment for the color coordinate system analysis. Finally five color extract need the observing a person's shape and color through experiment select the digital color system and so real skin color analysis and comparison about the experiment which suggest the something to color coordinate system the best case of digital color system for observing a person's shape and color implementation.

Establishment of Dissolution Specifications for Generic Drugs in Korea Pharmaceutical Codex Monograph - Nicametate Citrate Tablet, Norfloxacin Capsule (고시 수재 의약품의 용출규격 설정 - 구연산니카메테이트 정, 노르플록사신 캡슐)

  • Kim, Hee-Yun;Choi, Seon-Hee;Bang, Su-Jin;Han, Kyung-Jin;Choi, Sung-Hee;Baek, Ji-Yun;Kim, Dong-Sup;Kim, Young-Ok;Sohn, Kyung-Hee;Song, Young-Me;Sah, Hong-Kee;Choi, Hoo-Kyun
    • YAKHAK HOEJI
    • /
    • v.54 no.5
    • /
    • pp.362-369
    • /
    • 2010
  • Despite the fact that the dissolution test can serve as an effective tool for drug quality control and prediction of in vivo drug performance, there are a number of drugs with no established dissolution specifications because they were developed quite a long time ago. Under this circumstances, KFDA started the new project that establishes dissolution method and specifications for drugs with no dissolution specifications listed in the Korea Pharmaceutical Codex (KPC). This project aims for promoting the appropriate management of oral solid dosage forms. Seoul regional KFDA selected 2 items, Nicametate citrate tablet and Norfloxacin capsule, for establishing dissolution specifications. We went through the following procedures to develop the dissolution method and specifications: (1) Validation of dissolution test equipment, (2) Purchase of test drugs, (3) Preliminary test with one of the test products (1 lot), (4) Validation of analysis methods (3 lots), (5) Final tests and cross tests among other laboratory to establish dissolution specifications, (6) Additional test with the other test drugs. The outcome of this study will be reflected in revision of the KPC. It is believed that the quality control and evaluation of oral solid dosage forms listed in KPC will be advanced with the revision which adds additional dissolution test and specifications for the drugs with no established dissolution specifications.